SoundCore Rave Party Speakers A3391Z11 User Manual

: June 13, 2024
: Soundcore

Table of Contents

SoundCore Rave Party Speakers A3391Z11
Safety Instructions
What’s Included
What’s Included
Using Your Soundcore Rave
Specifications
DOWNLOAD
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SoundCore Rave Party Speakers A3391Z11

USER MANUAL

Model No.: A3391
5100500XXXX V01

Safety Instructions

Avoid dropping.
Do not disassemble.
Do not submerge in water.
Avoid extreme temperatures.
Do not use the device outdoors during thunderstorms.
Use original or certified cables.
Do not use any corrosive cleaner / oil to clean.

What’s Included

1. Central Volume Knob (For speaker volume control)
2. Power Button / Power Indicator
3. Source Input Button / Source Input Indicator
4. Bluetooth Button / Bluetooth Indicator
5. Previous Track Button
6. Multi-function Button
7. Next Track Button
8. Light Effects Button / Light Effects Indicator

9. Bass Up Button / Bass Up Indicator
10. MIC ECHO Volume Knob (For microphone volume control)
11. AC Power Input
12. Reset Hole
13. Mic Input
14. Audio IN
15. Audio OUT
16. USB Port
17. Power IQ USB Port

Using Your Soundcore Rave

1. Turn On / Off

ON: Press and hold for 1 second
OFF: Press and hold for more than 2 seconds

2. Pair

a. Bluetooth Mode

Soundcore Rave can pair up to 2 mobile devices via Bluetooth(Dual Bluetooth Connection).

With True Wireless Stereo technology, you can pair your Soundcore Rave with another Soundcore Rave to explore the best sound effects with left and right sound channels separated on both speakers.

Check available Light Effects modes on Soundcore App.

When turned on, Soundcore Rave will automatically connect to the last connected device if available. If not, press the Bluetooth pairing button to activate pairing mode.

To pair a different device, press the Bluetooth button to re-enter pairing mode. Then repeat the pairing steps.

Having connection problems? Remove Soundcore Rave from your device’s Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your speaker.

b. Source Input

Plug in an audio cable or insert USB drive, then press the source input button to switch between AUX in mode and USB mode(support FAT32 / MP3 / WMA formats).

Solid Green(Source input indicator): AUX in mode
Solid White(Source input indicator): USB mode

*SoundLine AUX cable sold separately.

c. Connect Multiple Rave Speakers

Soundcore Rave can connect to other Soundcore Raves via RCA cables to form a wired party chain.

d. Microphone Connection

Connect the microphone to MIC IN port. You can adjust the microphone volume by turning the MIC ECHO volume knob.

3. Charging your Soundcore Rave

You can charge your mobile device through the Power IQ USB port on EN Soundcore Rave.

Use the included AC power cable to charge your Soundcore Rave and make sure it is fully charged before its first use.
Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods.

4. Beat-Driven Light Show

Note: Flash can be turned off in Soundcore app individually.

5. Soundcore App

Download the Soundcore app for an enhanced product experience. Follow onscreen instructions to set up Soundcore app.

NOTE: When not in use, store your speaker in a cool place.

Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.