SoundCore Rave PartyCast Party Speakers A3390Z12 User Manual
- June 13, 2024
- Soundcore
Table of Contents
SoundCore Rave PartyCast Party Speakers A3390Z12
USER MANUAL
Charging
Charging Your Speaker
- Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.
Checking Battery Level
Charging Your USB Devices
Charge your USB devices through the USB port.
Powering On/Off
This speaker will power off automatically after 30 minutes if no device is connected.
Using Your Soundcore Rave PartyCast
Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled devices.
Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.
Two identical Soundcore Rave PartyCast speakers can pair with each other for stereo sound.
1. Connect either speaker with your Bluetooth-enabled device.
2. On both Soundcore speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode.
PartyCast Mode
You can wirelessly connect up to 100 identical Rave PartyCast speakers together.
- Soundcore speakers with PartyCast function can also be connected with this speaker.
1. Press and hold the PartyCast button for 2 seconds on the Soundcore Rave PartyCast that’s currently connected to your device as the primary speaker.
2. Repeat Step 1 on the other Soundcore Rave PartyCast you want to connect and then press the PartyCast button to make them secondary speakers in PartyCast pairing.
- The secondary speakers will automatically connect with the primary speaker.
When PartyCast mode is successfully entered:
- You can power off, adjust the volume, or switch light modes for all speakers by controlling the primary speaker only.
- You can power off or switch light modes for each secondary speaker individually.
- You can’t adjust the volume for each secondary speaker individually.
- Any secondary speaker can be switched to become the primary speaker by pressing the PartyCast button and connecting to your smartphone. Any primary speaker can be switched to become the secondary speaker by pressing the PartyCast button and searching for an available primary speaker.
- To exit the PartyCast mode, press and hold the PartyCast button on any speaker for 2 seconds.
AUX/USB Mode
- When using AUX mode, control audio playback via the connected device.
Button Controls
Light Effects
Download the Soundcore app to check all available light modes.
Soundcore App
Download the Soundcore app for enhanced product experience.
- Set up Bluetooth connections
- Check product information
- Update firmware
- Indicate battery status
- Switch among multiple light modes
- Switch between indoor and outdoor sound modes
- Light DJ mode to support light and sound variation
- Enjoy party games
- Switch BassUp mode
- Remotely control the volume and play/pause
- Set Auto-power off time
Specifications
Specifications are subject to change without notice.
| DC power input | 5 V 2 A (USB Type-C) |
|---|---|
| Battery capacity | 4900 mAh / 7.4 V |
| USB output | 5 V 2 A (USB Type-A) |
| Output power | 80 W |
| Charging time | Appr. 4.5 hours |
| Playtime (varies by volume level and music content) | Up to 18 hours |
| Waterproof level | IPX7 |
| Bluetooth version | V5.0 |
| Bluetooth range | 20 m / 66 ft |
| USB audio format | .mp3, .wma |
Support Videos
How to pair Motion Boom Plus with Rave PartyCast
How to pair Rave Neo, Rave PartyCast, and Trance Go Speakers via PartyCast
DOWNLOAD
SoundCore Rave PartyCast Party Speakers A3390Z12 User Manual – [Download PDF]
SoundCore Rave PartyCast Party Speakers A3390Z12 QSG – [Download PDF]
A3390Z12 Soundcore Rave PartyCast Declaration of Conformity – [Download PDF]