SONY ECM-B10 Shotgun Microphone User Guide

: June 4, 2024
: Sony

SONY ECM-B10 Shotgun Microphone

About the manual for this product

| For details on using the product, refer to the “Help Guide” (web manual).
“Help Guide” (Web manual)
https://rd1.sony.net/help/ilc/2120/h_zz/

Notes on use

This unit is a mi croph one compatibl e with the Multi Interface shoe. For ca mera models co mpatible with thi s unit, visit th e webs ite at : https://www.sony.net/dics/b10/
Using this unit with product s from other manufacturers may affect its performance, leading to accidents or malfunction.
This unit is designed to be dust and moisture-res istant, but is not waterproof or splas h-proof. When you use the unit in ra iny co nditions, do not let the unit get wet.
To avoid th e ri sk of a fire or an electric shoc k, observe th e following:
– Do not di sassemble or alter thi s unit.
– Do not use thi s unit with wet hands.
– Do not allow ingress of water or fore ign matters (metal, flammable substances, etc.) to thi s unit.
– Do not use thi s unit in a place subject to water splashes, high humidity, dust, oil fumes, and steam
To avoid th e ri sk of damage or a malfunction, observe th e following:
– Thi s unit is prec ision equipment. Do not drop the unit, hit it, or subject it to a strong phys ica l impact
– Do not touch the electrica l co ntact s on thi s unit with bare hands
– Do not use or store thi s unit in a place subject to high temperatures and humidity.
– When using this unit outdoors, kee p th e unit fro m exposure to rain or seawater
For interi or inspecti on and repa ir of thi s unit, co ntact your Sony dea ler or loca l authori zed So ny service fac ility.

For Customers in the U.S.A.

Fo r question regarding your product or for the Sony Service Center nearest you, ca ll 1-800-222-SONY (7669).
Supplier’s Declaration of Conformity
Trade Name : SONY
Model ECM-B1 0
Responsible Party: Sony El ectronics Inc.
Ad dress: 16535 Via Esprillo, Sa n Diego, CA 92127 U.S.A.
Telephone Number : 858-942-2230
Thi s device complies w ith part 15 of th e FCC rules. Operati on is subject to the following two conditions: (1) Thi s device may not ca use harmful interference, and (2) Thi s device must accept any interference received, including interference th at may ca use undes ired operati on.

A Identifying the Parts

Microphone
Micro USB port (for maintenance and service use)
Lock dial
Multi Interface foot
Co nnector protect ca p
Directivity se lection switch
ATT switch
AUTO/MAN switch
AUDIO LEVEL dial
FILTER switch
NC: Noise Cut
LC: Low Cut
DIGITAL/ ANALOG switch
(If your ca mera is compatibl e with th e digital audio interface of th e Multi Interface shoe, set th e switch to “” DIGITAL.”)
Wind sc reen

B Using this unit

Before attaching/removin g thi s unit to/from a ca mera, turn off the power to th e ca mera.

Remove the connector protect cap from this unit. B-1)
Attach this unit to a camera and rotate the lock dial in the LOCK direction to firmly secure the unit. B-2, 3)

Attaching thi s unit to a camera automati cally switches audio input from the built-in microphone to the external microphone.
When it is difficult to insert the Multi Interface foot into the shoe, rotate the lock dial counterclockwise until it stops.

Notes

To p rotect th e connector of the Multi Interface foot from damage w hile carrying around thi s unit, re move the unit from the ca mera, attach the co nnector protect ca p to the foot and put th e unit in the supplied pouch.
Whil e recording is in prog ress, operati on and handling noises of a ca mera or a lens may be recorded. Touching thi s unit while recording is in progress ca uses a noise to be in cluded in the recording.
Before changing the lens, make sure that no wind screen fi bers are prese nt on the surface of the lens and th e ca mera body.
If present, clean them off with a bl ower etc. and th en change the lens.
If dust or water drop lets are present on the surface of the microp hone, a successful recordin g may not be poss ible. Be sure to clea n th e mi croph one surface before using this unit.

Specifications

Type Pickup pattern| Back electret condense r type Super-directional / unidirectional / omnidirectional (selectable)
---|---
Dimensions (Approx.)| 27.4 mm x 81.7 mm x 79.3 mm (11 /8 in. x 3 1/4 in. x 3 1/8 in.) (W/H/D) (exc luding th e wind screen and projecting part s)
Mass (Approx.)| 72 g (26 oz)
Supplied items| Shotgun Microp hone (1), Wind screen (1), Connector protect cap (attached) (1), Pouch (1), Set of printed docu mentation

Des ign and spec ificati ons are subject to change w ithout notice.
“Multi Interface Shoe” is a t ra demark of Sony Group Corporati on.

Use this Help Guide when you have issues or questions on how to use your shotgun microphone.

| Supported camera models
This unit is a microphone compatible with the Multi Interface Shoe.
For camera models compatible with this unit, view here. (Another window will open.)
In combination with any camera model that is not listed on the website, the unit does not work.
---|---

Identifying the parts

Top, Side, and Bottom

Microphone
Micro USB port (for maintenance and service use)
Lock dial
Multi Interface foot
Note
- Do not touch the connector of the Multi Interface foot with bare hands.
Connector protect cap

Back

Directivity selection switch
: Super-directional
Provides a sharp directivity to pick up the sounds coming from the front. You can focus on recording the sounds coming from the camera front while minimizing the surrounding sounds.
: Unidirectional
You can record the sounds coming across from the front while minimizing those coming from the back.
: Omnidirectional
Provides the same directivity to pick up the sounds coming from every direction. Select this directivity when you want to record environmental sounds in particular or include the voice of a photographer in the recording.
ATT switch
Select the option suitable for the audio recording volume. To record loud sounds while minimizing distortion, select “20dB.” To record quiet sounds while amplifying the sounds, select “0dB.” It is recommended that you select an option while monitoring the volume level meter on the camera or the audio recording volume with headphones.
AUTO/MAN switch
AUTO: The recording volume level is automatically adjusted.
MAN: Adjust the recording volume with the AUDIO LEVEL dial.
AUDIO LEVEL dial
The recording volume level can be adjusted manually for fine tuning when the AUTO/MAN switch is set to “MAN.”
It is recommended that you adjust the level while monitoring the volume level meter on the camera or the audio recording volume with headphones.
FILTER switch
NC: Select this option to use the noise cut filter function. Unpleasant noises are effectively eliminated by digital signal processing. If the sound quality does not seem appropriate, select “OFF.”
LC: Select this option to use the low cut filter function. Unwanted noises, such as wind noise, air-conditioning noise, and vibration noise, are minimized.
OFF: Select this option to disable either of the filter functions. Note
- Hand-held use of the attached camera in a quiet place may cause a soft vibrating sound to be recorded. If the recorded vibrating sound is disturbing, set the FILTER switch to “LC” and try all over again.
DIGITAL/ANALOG switch
Select the digital or analog input type.
● If your camera is compatible with the digital audio interface of the Multi Interface Shoe, set the switch to “DIGITAL.”
This allows the unit and the attached camera to communicate with each other with digital signals and provide audio recording with minimum noise insertion.
● If your camera is not compatible with the digital audio interface of the Multi Interface Shoe, set the switch to “ANALOG.”
When the message “This accessory is not supported by the device and cannot be used.” is displayed on the camera, set the switch to “ANALOG.” If this does not help, see here.

About the wind screen

By fitting the wind screen over the microphone of the unit, you can minimize the noise caused by the wind or breath hitting the microphone to be included in the recording.

Note

If the wind screen is exposed to rain and wet, remove it from the unit and let it dry in the shade.

Related Topic

Attaching/removing to/from the camera
About the pickup pattern and the frequency response

Unpacking

If you find anything missing, please contact your dealer.
The number in the parentheses indicates the quantity.

Shotgun Microphone (1)
Wind screen (1)
Connector protect cap (attached) (1)
Pouch (1)
Set of printed documentation

Attaching/removing to/from the camera

Attach the shotgun microphone to a camera.

Note

Before attaching/removing this unit to/from a camera, turn off the power to the camera.

Remove the connector protect cap from this unit.
Attach this unit to the camera ( ① ) and rotate the lock dial in the “LOCK” direction ( ② ) to firmly secure the unit.

Attaching this unit to a camera automatically switches the audio input from the built-in microphone to the external microphone (this unit). When it is difficult to insert the Multi Interface foot into the shoe, rotate the lock dial counterclockwise until it stops, and then try again.
Operate the camera to start recording.
For details, refer to the Help Guide provided for the camera.

To remove the shotgun microphone
Turn off the power to the camera, rotate the lock dial counterclockwise until it stops, and then slide out the Multi Interface foot from the shoe.

About the pickup pattern and the frequency response

Super-directional pickup pattern

Super-directional frequency response

Unidirectional pickup pattern

Unidirectional frequency response

Omnidirectional pickup pattern

Omnidirectional frequency response

Notes on use

To protect the connector of the Multi Interface foot from damage while carrying around this unit, remove the unit from the camera, attach the connector protect cap to the foot and put the unit in the supplied pouch.
While recording is in progress, operation and handling noises of a camera or a lens may be recorded. Touching this unit while recording is in progress causes a noise to be included in the recording.
Monitoring or recording voice with the microphone of a camera may cause a slight delay of the voice.
Before changing the lens, make sure that no wind screen fibers are present on the surface of the lens and the camera body. If present, clean them off with a blower etc. and then change the lens.
If dust or water droplets are present on the surface of the microphone, a successful recording may not be possible. Be sure to clean the microphone surface before using this unit.

Specifications

Type	Back electret condenser type
Frequency response	40 Hz to 20 000 Hz
Pickup pattern	Super-directional / unidirectional / omnidirectional

(selectable)
Front sensitivity *1| -20 dBFS (0.1 Pa, 1 kHz)
Intrinsic noise* 1 2| 15 dB SPL or less (0 dB = 2×10-5 Pa)
Wind noise 1 *3| 50 dB SPL or less (without the wind screen attached) 30 dB SPL or less (with the wind screen attached)
Maximum input sound pressure level| 120 dB SPL1 4
Dynamic range** *2| 105 dB or more
Operation temperatures| 0 °C to 40 °C (32 °F to 104 °F)
Storage temperatures| -20 °C to +55 °C (-4 °F to +131 °F)
Dimensions (Approx.)| 27.4 mm × 81.7 mm × 79.3 mm (Width/Height/Depth) (1 1/8 in. × 3 1/4 in. × 3 1/8 in.)
(excluding the wind screen and projecting parts)
Mass (Approx.)| 72 g (2.6 oz)

Acquired by setting the AUTO/MAN switch and the ATT switch to “AUTO” and “10dB,” respectively.
Acquired by setting the DIGITAL/ANALOG switch to “DIGITAL.”
Equivalent sound pressure level value converted from the average value of the noise that is output from the microphone when a wind velocity of
2 m/sec. is applied. (0 dB = 2×10 -5 Pa)
Equivalent sound pressure level value converted from the input level value that is acquired when 1% waveform distortion is produced by 1 kHz
output signals from the microphone. (0 dB = 2×10 -5 Pa)

Design and specifications are subject to change without notice.

Trademarks

“Multi Interface Shoe” is a trademark of Sony Group Corporation.

When the message “This accessory is not supported by the device and

cannot be used.” is displayed on the camera:

Do the following in the listed order.

Make sure that your camera is compatible with this unit.
For camera models compatible with this unit, visit the website at: https://www.sony.net/dics/b10 Note
- In combination with any camera model that is not listed on the above website, the unit does not work.
To use a camera that is not compatible with the digital audio interface in combination with this unit, set the DIGITAL/ANALOG switch on the unit to “ANALOG.”
Clean the contacts on this unit and the camera. When either or both of the contacts are soiled with dust or the like, the camera may fail to detect that the unit is attached. To clean the contacts, use a cotton swab or a dry, soft cloth (e.g., a cleaning cloth). Do not use water or chemicals for cleaning

To prevent accidentally swallowing of the device parts, do not put them in your mouth.
To store this unit, avoid any locations subject to extremely high/low temperatures, high humidity, or direct sunlight.

Notice
If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable {USB, etc.) again.
This product has been tested and found compliant with the limits set out in the EMC regulation for using connection cables shorter than 3 meters {9.8 feet) except LAN cable.

For Customers in the U.S.A.

CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual could void yourauthority to operate this equipment.
Note :
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation. This equipmentgenerates, uses, and can radiate radio frequency energ and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equ.ipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

For Customers in Europe

Manufacturer: Sony Corporation
EU Importer/manufacturer’s authorized representative: Sony Europe B.V., Da Vincilaan 7-D1, 1930 Zaventem, Belgium.
UK Importer/manufacturer’s authorized representative: Sony Europe B.V., The Heights, Brooklands, Weybridge, Surrey KT13 OXW, United Kingdom.
Disposal of old electrical & electronic equipment (applicable in the European Union and other countries with separate **collection systems)**
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring that this product is disposed of correctly, you will help to prevent potential negative consequences for the environment and human health, which could be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

LIMITED WARRANTY

U.S. and Canada only – 1 year

Sony Electronics Inc. solely for purchases made in the United States and Sony of Canada Ltd. solely for purchases made in Canada (collectively “Sony”) warrants this product against defects in material or workmanship for the original owner and any subsequent end user owner(s) (“You” or “Your”) for the time period set forth above as set forth herein. Pursuant to this Limited Warranty, Sony will, at its option, (i) repair the product using new or refurbished parts or (ii) replace the product with a new or recertified/refurbished product of the same (or similar) model. For purposes of this Limited Warranty, “recertified” or “refurbished” means a product or part that has been returned to its original specifications. In the event of a defect, these are Your exclusive remedies. Sony does not warrant that the operation of the product will be uninterrupted or error-free.
Term: For the time period set forth above from the original date of purchase of the product when purchased directly from Sony or Sony authorized dealer (To determine if a dealer is in the Sony authorized dealer network, please visit US: www.sony.com/retailers; Canada: https://dealerlocator.sony.ca/locator; or contact Sony directly), Sony will, at its option, repair or replace with a new, recertified or refurbished product or part, any product or part determined to be defective.
This Limited Warranty covers only the hardware components packaged with the product. It does not cover separate accessories, technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the product, and other included content; any such software or other included content is provided “AS IS” unless expressly provided for in any enclosed software Limited Warranty or End User License Agreement. Please refer to the End User License Agreement(s) included with the product for Your rights and obligations with respect to the software or other included content. If You purchased an extended service plan, please refer to the service plan for the coverage, duration and terms of service. Extended service plans are not governed by this Limited Warranty.
To obtain warranty service, You must deliver the product, in either its original packaging or packaging affording an equal degree of protection to a Sony authorized service center together with a dated purchase receipt in order to obtain warranty service. Sony cannot guarantee that it will be able to repair any product under this warranty or make a product exchange without risk to or loss of software or data. It is Your responsibility to remove or backup any removable media or parts, data, software or other materials You mayhave stored or preserved on Your product. It is likely that any media or parts, data, software, or other materials (like pictures, music, videos, etc.) will be lost or reformatted during service and Sony will not be responsible for any such damage or loss. Contact the following for specific instructions on how to obtain warranty service for Your product:

For purchases made in the UNITED STATES:

Visit Sony’s Website: www.sony.com/support
Or call the Customer Experience Center: 1-800-222-SONY (7669)
To register Your product or for contact information to purchase accessories or parts go to Sony’s Website

For purchases made in CANADA:

Visit Sony’s Website: www.sony.ca/support
Or call the Customer Experience Center: 1-877-899-SONY (7669)
To register Your product or for contact information to purchase accessories or parts go to Sony’s Website On-site service for televisions of certain dimensions may be available to a customer living within a 50km radius of an authorized Sony service facility, provided the residence can be accessed by an on-road service vehicle.

Repair/Replacement Warranty: This Limited Warranty shall apply to any repair, replacement part or replacement, recertified or refurbished product for the remainder of the original Limited Warranty period or for ninety (90) days, whichever is longer. Any parts or product replaced under this Limited Warranty will become the property of Sony. Any replacement, recertified or refurbished product provided under this Limited Warranty may, at Sony’s option, vary in color and/or cosmetic design from the original product and may not include any original engraving or similar customization/personalization.
Sony is not responsible for, and this Limited Warranty does not cover, any damage arising from a failure to operate the product within its intended uses, or otherwise follow the owner’s manual and safety instructions relating to the product’s use and installation. Sony is not responsible for any labor or parts costs you incur relating to repairs or services from providers/servicers other than from a Sony authorized service center. This Limited Warranty only covers product issues caused by defects in material or workmanship during ordinary consumer use. This Limited Warranty does not cover products purchased from sources other than Sony or a Sony authorized dealer (including non-authorized online auctions), or issues due to: (i) outdoor exposure and other acts of nature; (ii) power surges; (iii) accidental damage; (iv) abuse; (v) limitations of technology; (vi) cosmetic damage; (vii) contact with liquid, heat, humidity or perspiration, sand, smoke, or foreign materials; (viii) damage, malfunction and/or failure to product resulting from use of parts or supplies not sold or authorized by Sony; (ix) damage, malfunction and/or failure to product resulting from servicing not authorized or performed by Sony or a Sony authorized service center; (x) computer or internet viruses, bugs, worms, or Trojan Horses; (xi) malfunctions due to peripherals/accessories; (xii) modifications of or to any part of the product, including “rooting” or other modifications to control the behavior of the product or any factory installed operating system; (xiii) consumable parts such as batteries; or (xiv) any product where the factory-applied serial number has been altered or removed from the product. Further, to the extent this product incorporates use of a display, please note that a display contains hundreds of thousands of individual pixels, and displays typically contain a small number of pixels that do not function properly. This Limited Warranty does not cover up to .01 % pixel outages (small dot picture elements that are dark or incorrectly illuminated).
This Limited Warranty does not cover Sony products sold “AS IS” or “WITH ALL FAULTS” or consumables (such as fuses or disposable batteries). Sony will not replace missing components from any package purchased “Open Box” or “AS IS”. This Limited Warranty is valid only in the United States and Canada (as applicable).
LIMITATION ON DAMAGES: SONY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT. NOR SHALL RECOVERY OF ANY KIND AGAINST SONY BE GREATER THAN THE ORIGINAL PURCHASE PRICE OF THE PRODUCT FROM SONY OR AN AUTHORIZED SONY DEALER
DURATION OF IMPLIED WARRANTIES OR CONDITIONS: EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY.
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to You. This Limited Warranty gives You specific legal rights and You may have other rights which vary from jurisdiction to jurisdiction.
For purchases made in the U.S.: Read the following Dispute Resolution/Arbitration provision carefully. It details Your rights and instructions should a dispute related to the product arise.
What Happens If We Have A Dispute: Should a dispute or claim arise related to the product, Your purchase and/or use of the product, the terms of this Limited Warranty, or any service provided under the terms of this Limited Warranty (including any repair or replacement) (“Dispute”), You and Sony agree that the Dispute shall be resolved exclusively through binding arbitration. YOU UNDERSTAND AND ACKNOWLEDGE THAT BY AGREEING TO ARBITRATION, YOU ARE GIVING UP THE RIGHT TO LITIGATE (OR PARTICIPATE IN AS A PARTY OR CLASS MEMBER) IN ANY DISPUTES IN COURT. You also agree that ANY DISPUTE RESOLUTION PROCEEDING WILL ONLY CONSIDER YOUR INDIVIDUAL CLAIMS, AND BOTH PARTIES AGREE NOT TO HAVE ANY DISPUTE HEARD AS A CLASS ACTION, REPRESENTATIVE ACTION, CONSOLIDATED ACTION, OR PRIVATE ATTORNEY GENERAL ACTION. Despite the above, You have the right to litigate any Dispute on an individual basis in small claims court or other similar court of limited jurisdiction, to the extent the amount at issue does not exceed $15,000, and as long as such court has proper jurisdiction and all other requirements (including the amount in controversy) are satisfied.
Arbitration Instructions. To begin Arbitration, either You or Sony must make a written demand to the other for arbitration. The Arbitration will take place before a single arbitrator. The arbitration will be administered in keeping with the Expedited Procedures of the Commercial Arbitration Rules and the Supplementary Proceedings for Consumer-Related disputes (“Rules”) of the American Arbitration Association (“AAA”), when applicable and in effect when the claim is filed. You may get a copy of AAA’s Rules by contacting AAA at 800-778-7879 or visiting www.adr.org. The filing fees to begin and carry out arbitration will be shared between You and Sony, but in no event shall Your fees ever exceed the amount allowable by the special rules for Consumers Disputes provided for by AAA, at which point Sony will cover all additional administrative fees and expenses. This does not prohibit the Arbitrator from giving the winning party their fees and expenses of the arbitration when appropriate pursuant to the Rules. Unless You and Sony agree differently, the arbitration will take place in the county and state where You live, and applicable federal or state law shall govern the substance of any Dispute during the arbitration. However, the Federal Arbitration Act, 9 U.S.C. § 1, et seq., will govern the arbitration itself and not any state law on arbitration. The Arbitrator’s decision will be binding and final , except for a limited right of appeal under the Federal Arbitration Act.
Opt-Out Instructions. IF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION PROVISION, THEN: (1) You must notify Sony in writing within 30 days of the date that You purchased the product; (2) Your written notification must be mailed to Sony Electronics Inc., 16535 Via Esprillo, MZ 1105, San Diego CA 92127, Attn: Legal Department; AND (3) Your written notification must include (a) Your NAME, (b) Your ADDRESS, (c) the DATE You purchased the product, and (d) a clear statement that “YOU DO NOT WISH TO RESOLVE DISPUTES WITH ANY SONY ELECTRONICS ENTITY THROUGH ARBITRATION AND/OR BE BOUND BY THE CLASS ACTION WAIVER.” Opting out of this dispute resolution procedure will not affect the coverage of the Limited Warranty in any way, and You will continue to enjoy the benefits of the Limited Warranty

LICENSE ISSUES

The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.

OpenSSL License

Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer. 2. Redistributions in binary forrn must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution. 3. All advertising materials mentioning features or use of this
software must display the following acknowledgment:
“This product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit. (http://www.openssl.org/) 4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to
endorse or promote products derived from this software without
prior written permission. For written permission, please contact
openssl-core@openssl.org. 5. Products derived from this software may not be called “OpenSSL”
nor may “OpenSSL” appear in their names without prior written
permission of the OpenSSL Project. 6. Redistributions of any form whatsoever must retain the following
acknowledgment:
“This product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit {http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ” AS IS” AND ANY
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISEDOF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young
(eay@cryptsoft.com). This product includes software written by Tim
Hudson (tjh@cryptsoft.com).

Original SSLeay License

Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
All rights reserved.
This package is an SSL implementation written
by Eric Young (eay@cryptsoft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as
the following conditions are aheared to. The following conditions
apply to all code found in this distribution, be it the RC4, RSA,
lhash, DES, etc., code; not just the SSL code. The SSL documentation
included with this distribution is covered by the same copyright terms
except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in
the code are not to be removed.
If this package is used in a product, Eric Young should be given attribution
as the author of the parts of the library used.
This can be in the form of a textual message at program startup or
in documentatiion (online or textual} provided with the package.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the copyright
notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the a1bove copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software
must display the following acknowledgement:
“This product includes cryptographic software written by
Eric Young (eay@cryptsoft.com)
The word ‘cryptographic’ can be left out if the rouines from the library
being used are not cryptographic related :-). 4. If you include any Windows specific code (or a derivative thereof) from
the apps directory (application code) you must include an acknowledgement:
“This product includes software written by Tim Hudson (tjh@cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ‘ ‘ AS IS” AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE Of THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or
derivative of this code cannot be changed. i.e. this code cannot simply be
copied and put under another distribution licence
[including the GNU Public Licence.] */