aVIGILon H5PRO-B H5 Pro Camera Line User Manual

: June 13, 2024
: aVIGILON

Table of Contents

H5PRO-B H5 Pro Camera Line
Product Information:
Product Usage Instructions:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

H5PRO-B H5 Pro Camera Line

Product Information:

The Avigilon H4 H5 Pro IP is a professional-grade IP camera. It
is available in two models: H5PRO-B and H4PRO-B. The camera
supports various features such as 802.1x, SNMP, HDSM SmartCodecTM,
RTSP, and ONVIF compatibility. It offers high-definition image
quality and advanced video compression technology.

Product Usage Instructions:

To access the camera’s web interface, open a web browser and
enter the camera’s IP address in the address bar. For example,
http://192.168.1.40/
On the web interface, you can configure various settings and
options. Use the provided username and password to log in as an
administrator.
In the “Live View” section, you can view the camera’s live
feed. You can also save still images to an SD card.
In the “Setup” section, you can customize general settings such
as name, location, LED status, and ONVIF compatibility.
Under “Mode,” you can choose between Full Feature mode and High
Framerate mode. Full Feature mode supports H.265 compression and
Unusual Motion Detection (UMD).
The “Overlay Setting” allows you to configure options like
displaying date, time, GMT offset, name, and location on the
camera’s video overlay.
In the “Time Settings” section, you can adjust the camera’s
clock, enable NTP synchronization, and configure time-related
settings.
Under “Network,” you can configure network settings such as
obtaining an IP address automatically or setting a static IP
address. You can also enable IPv6 and configure DHCPv6 settings if
needed.

Pro Web

Avigilon H4 H5 Pro IP :

H5PRO-B

H4PRO-B

© 2016 – 2021, Avigilon Corporation. AVIGILONAVIGILON HDSM SmartCodecAVIGILON ACC ACCESS CONTROL MANAGER ACM Avigilon Corporation AndroidGoogle LLC AppleSafari Mac Apple Inc Firefox Mozilla Foundation TM ® Avigilon Corporation (avigilon.com/patents)Avigilon Corporation patentlist.hevcadvance.com 1 Avigilon Corporation Avigilon Corporation :(1) (2) Avigilon ( ) Avigilon Corporation avigilon.com PDF-ProWebUI-A : 1 – JA 20211022
ii

Web
Web
Live View()
802.1x 802.1X 802.1X SNMP IP Image and Display() HDSM SmartCodecTMTM RTSP URI URI HDSM SmartCodecTM

1 1 1
2 2 3
4 4
5 6 8 11 12 13 13 14 15 16 21 23 24 25 26 26 27 28 28 29 29 29 29
iii

30

ONVIF G

31

Web

31

SD

32

33

SD

33

34

35

36

37

38

WebUI

39

iv

Avigilon IP Web Web Web

Web Web WindowsMac
l Microsoft Edge 44 l Mozilla Firefox 3.6 l Google ChromeTM 8.0 l Apple Safari 5.0 l AndroidTM 2.2 l Apple iOS 5.0
Web
Avigilon Web : l IP Web — H5A H5SL l PTZ Web — l Web — l H5A Fisheye Web — H5A Fisheye l Web — H4 l APD Web — Avigilon Presence Detector

1

Web
Web IP IP
l Avigilon (ACC) — [] l Avigilon — [Network()] IP Web
Web Web
1. Web IP : http://< IP >/ : http://192.168.1.40/
2. 2020 1 1 2

2020 1 1

Web

2

2020 1 1 3
Add User( )
1. administrator 2. Password()
3. 4. Administrator() Security Group(
) 5. [Apply()]

l 2020 1 1
l administrator
l HD Pro H3A admin admin
36

3

Live View()
Live View() Web [Live View( )]

Live View() [Save Still to SD Card( SD )] Web
l SD SD CryptR FIPS 3 SD
l Storage() 29
l Compression and Image Rate() MJPEG 23
[Save Still to SD Card( SD )] Live View() SD Web 31

Live View()

4

Web [Setup()] [Restore Defaults()] Web

5

Setup() General() General()

1. [Name()] 2. [Location()] 3. [ LED ] LED

4. H5 Pro 40 MP 61 MP
[Enable ONVIF compatibility (ONVIF )] H5 Pro ONVIF® VMS VMS ONVIF
40MP 61MP H5 Pro ONVIF 32MP 32 MP VMS SD Enable ONVIF compatibility (ONVIF ) H5 Pro ACC
ONVIF Onvif, Inc.
5. H4 Pro
[Enable ONVIF compatibility (ONVIF )] H4 Pro ONVIF

6

ONVIF [Enable ONVIF compatibility (ONVIF )] ONVIF [Enable ONVIF compatibility (ONVIF )] ONVIF ACC ACC

6. [Mode()]

l Full Feature()– 26 MP H5 Pro H.265
l High Framerate( ())–
26 MP H5 Pro High Framerate( ()) Unusual Motion Detection (UMD) H5Pro

High Framerate( ())

26 MP H5 Pro 26C-H5PRO-B

l l Unusual Motion Detection (UMD) l H.265H.265Full Feature()

7. [Overlay Setting()] l Display Date()
[Display Date()] [Date Format ()] l Display Time()

7

l Display GMT Offset(GMT ) l Display Name() l Display Location() 8. [Time Settings()] l l [Automatically adjust clock for Daylight Savings Time(
)] l NTP Network(
) NTP (Configure NTP Server(NTP )) Network()NTP 8 — ACC l ACC DHCP NTP l NTP l [Time Settings()] 9. [Apply()] [Network()] Web HTTPS RTSP NTP
1. IP l Obtain an IP address automatically(IP ): IP IP DHCP IP 169.254.x.x

8

l Use the following IP address ( IP ): IP l IP Address(IP ) IP l Subnet Mask( ) l Default Gateway()
2. IP ARP/Ping [Disable setting static IP address through ARP/Ping method(ARP/Ping IP )] 3. IPv6 [Enable IPv6 (IPv6)] IPv6 IPv4
a. [Accept Router Advertisements ()] b. [DHCPv6State(DHCPv6)] l Auto (): DHCPv6 (RA)
Accept Router Advertisements ()
l Stateful (): DHCPv6 IP DNS NTP
l Stateless (): DHCPv6 DNS NTP DHCPv6 IP
l Off: DHCPv6 c. [Static IPv6 Addresses ( IPv6 )] IPv6
+ (CIDR) IPv6 2001:db8::1/32 32 /64

9

Web
d. [Default Gateway()] RA
IPv6 Current IPv6 Addresses ( IPv6 )
4. [Hostname()] 5. [DNS Lookup(DNS )] (DNS)
l Obtain DNS server address automatically(DNS )DNS
l Use the following DNS server addresses( DNS )DNS 3
l Preferred DNS server( DNS ) DNS
l Alternate DNS server 1( DNS 1) DNS
l Alternate DNS server 2( DNS 2)DNS
6. [Control Ports()] 165534
l HTTP Port(HTTP ): 80
[Enable HTTP connections (HTTP )] HTTP Port(HTTP )
l HTTPS Port(HTTPS ): 443
l RTSP Port(RTSP ): 554
l RTSP Replay Port(RTSP Replay ): 555

10

7. NTP Server(NTP ) NTP
1. NTP
l Always use Avigilon Control Center NTP Server ( Avigilon Control Center NTP Server )AvigilonTM
l Always use external NTP server ( NTP ) NTP NTP
l Use Avigilon Control Center Server with a failover external NTP( Avigilon Control Center NTP )AvigilonAvigilon ACC NTP
2. NTP
l DHCP:(DHCP:)
l Manual:(:)[NTP Server(NTP )] 8. MTU(MTU)(MTU) MTU
9. Ethernet Setting()Speed & Duplex( )Auto-negotiation (default)( ( ))
10. Security() TLS Minimum TLS version( TLS )
l TLS 1.2
l TLS 1.1
11. [Apply()] 802.1x
802.1x

802.1x

11

1. Network() > 802.1X(802.1X) 2. Configure 802.1X Profiles(802.1X )
1 [EAP Method(EAP ) ] :
l PEAP(PEAP) o Configuration Name(): o EAP Identity(EAP ): o Password():
l EAP-TLS(EAP-TLS) o Configuration Name(): o EAP Identity(EAP ): o TLS Client Certificates(TLS ): PEM o Private Key(): PEM o Private Key Password(): o [Upload Files()] TLS [Uploaded Certificate()] 3. [Save Config()] Saved 802.1X Configurations( 802.1X )
802.1X
[Enable()]

802.1X

12

802.1X
1 [Remove()] SNMP
(SNMP) SNMP SNMP
SNMP(SNMP) SNMP Avigilon Web (http://avigilon.com/support-and-downloads) (MIB)
1. Network() > SNMP(SNMP) 2. SNMP(SNMP)[EnableSNMP(SNMP)] 3. [Version()] SNMP
1
l SNMP v2c(SNMP v2c): SNMP v2c SNMP Get [SNMP v2c Settings(SNMP v2c )] [Enable Traps()] a. Read Community(): SNMP SNMP b. Trap Destination IP( IP): IP [Available Traps()] l Temperature Alert(): l Camera Tampering():

802.1X

13

l Edge Storage Status( ): SD
l IR Illuminator Status (IR ): H4 IR LED
l SNMP v3(SNMP v3): SNMP V3 SNMP Get SNMP v3 SNMP v3 SHA-1 AES [SNMP v3 Settings(SNMP v3 )] a. Username(): SNMP Get b. Password():
4. [Apply()]

FIPS140-2 1 3
l FIPS 140-2 1 FIPS l FIPS 140-2 3 CRYPTR CRYPTR SD
1. Advanced()Network() 2. EncryptionEngine()
l Open SSL l FIPS 140-2FIPS 140-2 1 l CRYPTR micro(CRYPTR ) CRYPTR FIPS140-2 3

14

CRYPTR micro(CRYPTR ) CA CA Camera Configuration ToolCCT CSR Camera Configuration Tool User Guide ( )
3. Apply()
Avigilon
CRYPTR CryptR Log(CryptR ) CRYPTR micro 80 CRYPTR micro syslog CRYPTRmicro CryptR Log(CryptR ) syslog
CRYPTR FIPS 140-2 CryptR CRYPTR micro (CRYPTR )Encryption Engine()
IP
IP Filter(IP ) IP
2 IP
l IPDeny Access() l IP Allow Access()

IP

15

Allow Access() IP
1. Network() > IP Filter(IP ) 2. Enable IP Filter(IP )IP
3. IP
l Allow Access() IP IP
l Deny Access() IP
4. IP Filter Entries(IP ) a. +IP b. IPv4, IPv6 or CIDR range(IPv4IPv6 CIDR ) IP IPv4IPv6 CIDR c. IP
256 IP Filter Entries(IP )
5. [Apply()] IP Apply() Web
Image and Display()

Image and Display()

16

Image and Display()/
Image and Display() [Apply()]

l Current Exposure() l Current Gain() l Current Iris() l Last Known Light Level()
Avigilon IP
1. Zoom() l l
2. [Focus()] l l << l < l 0 l l >> l > l [Inf()] l [Auto Focus()]

Image and Display()

17

3. IR Focus Offset( ) IR
4. l Day/Night Mode(/): [Day/Night Mode(/)] l Automatic(): / / l / Automatic [ (Restore Automatic after Timeout)] [ (Timeout)] 5s 3600s l /[Day/Night Threshold(/)] [Day/Night Mode (/)] [Automatic()] l / (EV): (EV) Day/Night Threshold(/) l Day/Night Threshold (gain dB)(/ dB): (dB) l Hysteresis() o Low () o High() o Medium() l Color():

Image and Display()

18

l Monochrome(): l External(): IR

Digital Inputs and Outputs( ) 34
l Day/Night Delay (seconds) (/ ()): /
l IR LED : IR
l Enable Adaptive IR Compensation(): IR IR IR
l ROI (Show Auto Contrast ROI):
l Enable Night Visibility Check ():
30
5. Exposure Settings() l Flicker Control(): Flicker Control() 50Hz60Hz

Image and Display()

19

l Enable Wide Dynamic Range( ): (WDR)
l Exposure():Automatic()

l Exposure Offset():
l Maximum Exposure(): [Maximum Exposure()] [Exposure()] [Automatic()] l Priority(): Max Image Rate () Exposure() l Max Image Rate () l Exposure()
l Maximum Iris(): F (EV) [Iris()] [Automatic ()] F (0 EV) FEV
l Preferred Iris(): F (EV) [Iris()] [Automatic()]

Image and Display()

20

Preferred Iris() Maximum Iris()
F (0 EV) F EV l BacklightCompensation(): [Backlight Compensation()] l Iris(): Automatic() Open() Closed() l Maximum Gain(): l (Equalization): l Color Palette: [ (Color Palette)] 1
l WhiteHot l BlackHot l Rainbow 6. [Apply()]

Adjustments()
Adjustments() [Apply()]

21

1. ImageandDisplay()>Adjustments()
2. [Preset()] : a. Avigilon: b. Standard(): c. Vivid(): d. Custom():
Brightness() Contrast()
l Saturation(): 0 100
l Sharpness(): 0 100
l Brightness(): 0 100
l Contrast(): 0 100
3. White Balance( ) : l Automatic(): l Custom()Red() Blue()

22

Dominant Color Compensation( ) 1 Dominant Color Compensation( ) 4. Temporal Filter Strength ()

50 5. [Apply()]

Compression and Image Rate ()

Web JPEG Avigilon H.264 IP H.264 Web JPEG

23

1. [Format()] Onboard Storage( ) [H.264(H.264)] [H.265] 30
2. [Max Image Rate ()] 1
30 fps
High Framerate( ()) High Framerate( ()) 6 3. Max Quality () 1 4. [Max Bitrate()] 5. Resolution() 6. [Keyframe Interval()] 7. [Apply()] HDSM SmartCodecTMTM
HDSM SmartCodecTM
27

HDSM SmartCodecTMTM

24

HDSM SmartCodecTM HDSM SmartCodecTM 26
1. [Enable()] HDSM SmartCodec 2. [ (Min Image Rate)] 1 3. [ (Idle Keyframe Interval)] (1254) 4. [Bandwidth Reduction] :
l l () l l 5. [Apply()] RTSP URI
Compression and Image Rate() RTSP ( ) RTSP URI RTSP
RTSP Web
1. [Generate RTSP Stream URI(RTSP URI )] RTSP URI RTSP Stream URI(RTSP URI) URI l Unicast() — 1 l Multicast() — RTSP :

RTSP URI

25

a.
b. rtsp://<>:<>@< RTSP URI>/ : rtsp://admin:admin@192.168.1.79/defaultPrimary?streamType=u
c. 2. [Generate RTSP
Stream URI(RTSP URI )] [RTSP Stream URI(RTSP URI)] URI
Compression and Image Rate()
l [StillImageURI(URI)]URI

HDSM SmartCodecTM
HDSM SmartCodecTM HDSM SmartCodecTM HDSM SmartCodecTM HDSM SmartCodecTMTM 24
1. Compression and Image Rate() > Advanced
2. [ (On Motion)] [ (Background Quality)] ( 6 20 )
3. [ (On Idle Scenes)] [ (Post-motion delay)] (560)
4. [ (On Idle Scenes)] [ (Image Rate)] (1 )
5. [] [] (6 20)

URI

26

6. [] [] 7. [ (On Idle Scenes)] [ (keyframe Interval)] (1254 )
8. [Apply()] [Motion Detection ()]

Avigilon Avigilon Avigilon Client User Guide
1. l [Clear All()] l [Set All()] l [Select Area()] l [Clear Area()] l [Zoom In()] [Zoom Out()]

27

2. [Sensitivity()] 3. [Threshold()] 4. (VMS) [Enable Onvif MotionAlarm Event(Onvif MotionAlarm )] H.264 ONVIF VMS
5. [Apply()] [Tamper Detection ()] 1. [Sensitivity()]110

2. [Trigger Delay ()] ( 30 )

VMS ONVIF
— VMS

28

VMS ACC ACC 1. [ONVIF ] ONVIF VMS 2. [Apply()]

Privacy Zones( ) 64

1. [Add()] 2. a. b.
3. [Apply()] [X(X)]

Storage() SD microSD

29

SD SD SD 33
FIPS 3 SD CryptR SD 2 microSD CryptR
microSD 2 microSD 2 microSD

SD SD
SD
microSD 2 microSD 2 microSD
1. Storage()[Enable Onboard Storage( )] 2. SD SD [Record only when server connection is interrupted( )]

30

3. 1 l Continuous(): SD l On Motion(): Avigilon On Motion() Avigilon
5 100 4. Compression and Image Rate() SD
[H.264(H.264)] [H.265] ONVIF G
ONVIF G VMS
l 4.4.0.X ONVIF G
l 4.4.0.X ONVIF G
ONVIF G SD SD G
ONVIF Onvif, Inc.
Web
[Recordings()] SD FIPS 3 SD CryptR SD 2 microSD CryptR

ONVIF G

31

Web SD SD 32
Web
1. Storage() [Filter( )] 2. [Download()]

1
SD
Web SD
SD
1. [Settings()][EnableOnboardStorage()] [Apply()] 2. SD 3. SD 4. Windows[Openfoldertoviewfiles] 5. Avigilon Camera Footage()
[Avigilon Camera Footage()] SD
l [Download All()] l Download Selected()

SD

32

6. SD
7. SD 8. SD [Enable Onboard Storage( )] SD

SD
Storage()
l [Recordings()] [Delete()] l [Format Card()] SD
SD
SD SD
SD Web l : SD
[ SD ] [Storage()] l Storage() : SD
SD SD SD SD
[Storage()] [ SD ] Web SD

33

SD SD SD

Digital Inputs and Outputs()
1. : a. [Digital Inputs()] [Name()] b. [Circuit State()] l () l () c. [Apply()] [Circuit Current State()] [Open()] [Closed()] 2. : a. [Digital Outputs()] [Name()] b. [Circuit State()] c. IR [IRCF ( )] IR IR IR d. [Duration()] 10086,400,000 e. [Trigger()] Web f. [Apply()]

34

Microphone()
l [Apply()] Avigilon 2
1. InternalMicrophoneGain()–
2. External Source Gain() —
3. [Apply()]

Speakers()
l 0 100 [Apply()]

Users()

35

1. [Add…(…)] 2. AddUser()
3. [Security Group( )] l Administrator(): Web l Operator(): General Image and Display( ) Compression and Image Rate() Motion Detection() Privacy Zones( ) Digital Inputs and Outputs() Microphone() Speakers() SD l : Live View()
4. [Apply()]

1. Users() ( ) [Modify()] 2. 3. [Security Group(
)]

4. [Apply()]

Administrator()

36

1. Users() (Security Group) 2. [Remove()]

1. Users() [Do not clear usernames or passwords on firmware revert()] 2. Please store your administrator password in a safe place. Password recovery is not covered by warranty and loss of password may void your warranty.( )
3. [OK(OK)]

System()
l [Reboot()] l [Restore()]

37

37
l 38

:
1. Avigilon Web .bin (avigilon.com/support):
2. System()[Choose File] 3. [Upgrade()]

Device Log( )

1. [Type()] l Access Logs( ) — Web l System Logs( )–
2. [Minimum Log Level( )] : l Error()– l Warning() — l Info()–

38

3. [Maximum Number of Logs()] :
4. [Update()] WebUI
WebUI ONVIF API Web ACC ONVIF VMS
Web UI ONVIF API ACC ONVIF VMS
Web UI ONVIF API : 1. [ ONVIF API ] 2. [Apply()] 3. [OK(OK)]

WebUI

39