LogiLink SH0105 WiFi 6 Port Smart Power Strip With 4 USB Ports User Manual

SHO105
Wi-Fi 6-Port
Smart Power Strip
with 4 USB Poris
User Manual

Package Contents

Power Strip x1
User Manual x1

Safety Instructions.

Do not overload.
Don’t place the device into direct sunlight or in places with high temperature. This will damage the device or shorten its average lifespan.
Don’t place it near heat sources like radiators or other heat producing devices.
Do not use in damp places such as patios, cellars or near flammable liquids such as solvents or paints.
The device should be installed and operated with a minimum distance of 2 cm between the radiator and your body.
This product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury.
Keep the device dry and clean at all times.
Don’t try to open the device. Congratulations on the Purchase of SH0105!
Please read the manual and safety Instructions before using the product for the first time. Otherwise damage may result.
Elaborated to the best of our knowledge and with utmost diligence we reserve the right of error and technical modifications.
According to the European WEEE directive, electrical and electronic equipment must not be disposed with consumers waste. Its components must be recycled or disposed apart from each other. Otherwise contaminative and hazardous substances can pollute our environment.
You as a consumer are committed by law to dispose electrical and electronic devices to the producer, the dealer, or public collecting points at the end of the devices lifetime for free. Particulars are regulated in national right. The symbol on the product, in the user’s manual, or at the packaging alludes to these terms. With this kind of waste separation, application, and waste disposal of used devices you achieve an important share to environmental protection.
Hereby, the company 2direct GmbH declares that the Wi-Fi 6-Port Smart Power Strip with 4 USB Ports type SH0105 is in compliance with the essential requirements and other relevant regulations of Directives 2014/53/EU, 2014/30/EU and 2014/35/EU. The complete Declaration of Conformity can be found at http://www.2direct.de 2direct GmbH – Langenstuck 5 D-58579 SchalksmOhle

Introduction

1. 4x USB ports (5 V/4 A, 20 W max.)

2. 6x Safety sockets CEE 7/3

3. Power switch:
   Short press to turn on/off device. Press and hold to change the LED indicator into flashing state to reset SH0105 to defaults. Only do this if you are sure you want to clear all previous settings.

4. Safety plug CEE 7/7

5. Manual Overload Reset Switch: Resets the power strip without unplugging or plugging it again, while it automatically shuts off by sensing a current overload.

• Frequency Range: 2,412-2,472 MHz
• Max. Transmission Power: 100 mW

Manual Operation

1.  Insert SH0105 into a wall outlet.
2. Shod press the Power switch on SH0105 to turn on/off.

App Configuration

In order to use SH0105 remotely, you need to download “Smart Life” or “Megos Smart Home” app and register an user account. The setup and viewing can be done from your smartphone or tablet.

| |
---|---|---
| https://apps.apple.com/app/smart-life-smart-living/id1115101477| https://play.google.com/store/apps/details?id=com.tuya.smartlife
| |
| https://apps.apple.com/tw/app/megos-smart-home/id1536125780| https://play.google.com/store/apps/details?id=com.innovent.megos&hl

Setting up the App User Account

1. Create new account in the app, dlick on “Register”.
2. Please enter your email or phone number, which would be your login account.
3. Accept the Service Agreement and Privacy Policy.
4. Press “Continue”, you will receive a verification code by email or SMS. You will receive the email or SMS immediately. If you do not receive the email, please check your Spam Folder. If you do not receive the SMS, please check your registered phone number.
5. Enter verification code.
6. Create a password that you can remember (alphabet and numerical characters are supported).
7. Please enter a name, which you can choose freely (e.g. home). You can now also determine the location and in which room your SH0105 is located.

• Connect SH0105 to your Wi-Fi with smartphone/tablet

1. Insert SH0105 into a wall outlet.

2. Press and hold the Power switch on SH0105 for 5 seconds, until the LED indication light starts to flash quickly.
   Turn on the Bluetooth of your smartphone/tablet and make sure it connects to the Wi-Fi.

3. Open the app, click “+” icon to “Add Device”.

4. Select “Electrical” “Power Strip (Wi—Fi)” There is also an auto search device function available.

5. Your WiFi’s SSID will be shown to connect with. Please make sure, your mobile device is connected to your 2.4 GHz WiFi network.
   Please key in the password for your router/AP at home.
   5 GHz WiFi networks will not be supported.

6. Follow the on-screen instructions to complete the setup.

• Remote Control From the App

1. Switch On/Off all the sockets and USB ports at once.
2. Switch On/Off Group 1 (3 sockets), and name this group.
3. Switch On/Off Group 2 (3 sockets), and name this group.
4. Switch On/Off Group 3 (4 USB ports), and name this group.
5. Set a timer to switch On/Off a group.
6. Add schedule to switch On/Off a group.
7. Change the device name (SH0105) and check the device’s network status.

• Adding a Tuner (Schedule)

• Countdown Timer • Link SH0105 with Third Party Controls

1. For the use with a System like Amazon Alexa or Google Home, we recommend to give the SH0105 an identifiable name, e.g. Power Strip.
2. Choose the Third party control you wish to link with, and follow the instructions on the app.

The following is an example of setting up with Google Assistant.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>