MARCH PUMP 893 BRUSHLESS Paragon Motor with Voltage Protection Installation Guide
- June 13, 2024
- MARCH PUMP
Table of Contents
893 BRUSHLESS
Paragon Motor w/VolCtage Protection893-11 & 893-12
893 BRUSHLESS Paragon Motor with Voltage Protection
Series 893 are centrifugal magnetic drive pumps, eliminating the need for a
shaft seal.
A flooded suction is essential for operation since the pump is not self-
priming. Pumps cannot be run dry because the impeller requires the liquid
being pumped for lubrication. For application assistance, contact March Pump.
ELECTRICAL:
The Brushless Motors have voltage protection. Red lead is positive, black lead
is negative.Model 893-11 (12 VDC) starts at 5.5 V ± ≈0.5 V and turns off at
17.5 V ± ≈0.5 V.
Model 893-12 (24 VDC) starts at 8.5 V ± ≈0.5 V and turns off at 28 V ± ≈0.5 V.
LIMITED WARRANTY:
March pumps are guaranteed only against defects in workmanship or materials for a period of one year from date of manufacture pumping water. For the complete warranty and to register online go to www.marchpump.com/warranty- registration
| SPECIFICATIONS | 893-11 (12 VDC) | 893-12 (24 VDC) |
|---|---|---|
| Product # | 0893-0067-0100 | 0893-0068-0100 |
| Max Flow | 2.7 gpm – 11 Ipm | 2.7 gpm – 11 Ipm |
| Max Head | 10.6 ft / 4.5 psi – 3.3 m | 10.6 ft / 4.5 psi – |
| Inlet – Outlet | 3/8″ FPT – 3/8″ OD | 3/8″ FPT – 3/8″ |
| Max Internal Pressure | 50 psi – 344 kPa | 50 psi – 344 kPa |
| Max Liquid Temperature | 190 °F (87 °C) | 190 °F (87 °C) |
| Packed Weight! 1.0 lbs / 0.45 kg | I 1.0 lbs / 0.45 | |
| Motor Leads | 19″-20″ (51 cm) | 19″-20″ (51 cm) |
| ELECTRICAL | A | W |
| 12 V | 1. | 10 |
| 24 V | ||
| Height | Width | Length |
| Overall Size | 2.96″ | 1.85″ |
| 7.5 cm | 4.6 cm | 13.3 cm |
| Materials in Contact With Solution | Noryl, Polypropylene Carbon/Teflon, Buna |
N, 316 Stainless Steel
All specifications & data are based on pumping water & are intended as a
guideline only. Specifications may vary with different motors.
| 893-11 (12 VDC)| #| 893-12 (24 VDC)
A| 0115-0062-1000 1 4 I #7-19 x 1-7/16″ Lg. Self-Tapping Screws (Stainless)|
A| 0115-0062-1000 1 4 I #7-19 x 1-7/16″ Lg. Self-Tapping Screws (Stainless)
B| 0893-0004-1000 1 1 1 3/8″ FPT Inlet Cover (Noryl)| B| 0893-0004-1000 1 1 1
3/8″ FPT Inlet Cover (Noryl)
C| 0115-0018-1000 1 2 1 1/16″ CS x 1-7/16″ OD “0” Ring (Buna N)| C|
0115-0018-1000 1 2 1 1/16″ CS x 1-7/16″ OD “0” Ring (Buna N)
D| 0115-0119-1000 11 I Encapsulated Impeller (Polypropylene)| D|
0115-0119-1000 11 I Encapsulated Impeller (Polypropylene)
E| 0115-0032-1000 11 1 Shaft (316 Stainless)| E| 0115-0032-1000 11 1 Shaft
(316 Stainless)
F| 0115-0033-1000 I 1 1 Rear Thrust Washer (Carbon/Teflon)| F| 0115-0033-1000
I 1 1 Rear Thrust Washer (Carbon/Teflon)
G| 0893-0003-1000 I 1 1 3/8″ OD Outlet Rear Housing (Noryl)| G| 0893-0003-1000
I 1 1 3/8″ OD Outlet Rear Housing (Noryl)
H| 0115-0101-0100 1 1 I Drive Magnet| H| 0115-0101-0100 1 1 I Drive Magnet
I| 0893-0066-1000 1 4 I #4-40 x 0.147″ Lg. Screws (Stainless)| I|
0893-0066-1000 1 4 I #4-40 x 0.147″ Lg. Screws (Stainless)
J| 0893-0065-0000 1 1 1 Motor Bracket (Plastic)| J| 0893-0065-0000 1 1 1 Motor
Bracket (Plastic)
K| 0210-0008-1000 I 1 1 1/16″ CS x 7/16″ OD “0” Ring (Viton)| K|
0210-0008-1000 I 1 1 1/16″ CS x 7/16″ OD “0” Ring (Viton)
L| 0125-0110-1000 11 I Plug (Plastic)| L| 0125-0110-1000 11 I Plug (Plastic)
M| 0893-0062-1000 I 1 1 Motor (Paragon) 12 VDC Brushless| M| 0893-0063-1000 I
1 1 Motor (Paragon) 24 VDC Brushless
1819 PICKWICK AVE., GLENVIEW, IL 60026-1306, U.S.A
PHONE:847-729-5300 – FAX:
847-729-7062
WWW.MARCHPUMP.COM
Documents / Resources
|
MARCH PUMP 893 BRUSHLESS Paragon Motor with Voltage
Protection
[pdf] Installation Guide
893 BRUSHLESS Paragon Motor with Voltage Protection, 893, BRUSHLESS Paragon
Motor with Voltage Protection, Paragon Motor with Voltage Protection, Voltage
Protection
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>