OREI UHD-EXB400R-K 18Gbps HDMI Over HDBaseT Extender User Manual
- June 13, 2024
- OREI
Table of Contents
OREI UHD-EXB400R-K 18Gbps HDMI Over HDBaseT Extender User Manua l
Introduction
This 18Gbps HDMI Extender can extend high definition video / audio signal,RS-232, bi-directional IR, and the distance is up to 492ft / 150 meters betweentransmitter and receiver via a single CAT cable. It supports resolution up to4K2K@60Hz 4:4:4, 18Gbps and HDCP 2.2. One HDMI loop port is availablefor output. It also supports de-embeded audio for L/R audio output and PoC function. In addition, the extender is equipped with two-way IR pass-through which allows for source and display control.
This HDMI extender includes two units: transmitter unit and receiver unit. Thetransmitter unit is responsible for capturing HDMI input signal and carryingthe signal via one cost effective Cat5e/6 cable, and transmitting / emitting IRcontrol signals. The receiver unit is responsible for receiving the HDMI signal and transmitting / emitting IR control signal.
The extender offers the most convenient solution for HDMI extension via asingle Cat5e/6 with long distance capability, and is the perfect solution for any application.
Features
- HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
- Support 18Gbps video bandwidth
- The maximum extended transmission distance via a single Cat5e/6 cable: 394ft / 120 meters for 4K2K signal; 492ft / 150 meters for 1080P signal
- Support one HDMI loop output on the transmitter
- De-embeded audio to analog stereo output on receiver
- With bi-directional IR, RS-232 and CEC pass-through
- HDR, HDR10+, Dolby Vision and HLG function supported
- Support PoC (Power over Cable) function
- Compact design for easy and flexible installation
Package Content
| Qty | Item |
|---|---|
| 1 | 18Gbps HDMI over HDBaseT Extender (Transmitter) |
| 1 | 18Gbps HDMI over HDBaseT Extender (Receiver) |
| 1 | IR Blaster cable (1.5 meters) |
| 1 | 20~60KHz IR Receiver cable (1.5 meters) |
| 4 | Mounting Ear |
| 2 | 3-pin Phoenix connector |
| 1 | 24V/1A Locking Power adapter |
| 1 | User Manual |
Specifications **
**
Technical
HDCP Compliance| HDCP 2.2 / HDCP 1.4
Video Bandwidth| 18Gbps
**** Video Resolution| 4K2K 50/60Hz 4:4:44K2K 50/60Hz 4:2:24K2K 50/60Hz
4:2:04K2K 30Hz 4:4:41080p, 1080i, 720p, 720i, 480p, 480iAll HDMI 3D TV
formatsAll PC resolutions including 1920 x 1200
Color Space| RGB / YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth| 8/10/12-bit (1080P60Hz, 4K30Hz, 4K60Hz
YCbCr4:2:2/4:2:0)8-bit (4K60Hz 4:4:4 )
HDMI Audio Formats| LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby
TrueHD, Dolby Digital Plus(DD+), DTS-ES, DTS HD Master, DTS HD-HRA, DTS-X
L/R Audio Formats| PCM 2.0
ESD Protection| Human body model — ±8kV (Air-gap discharge) &±4kV (Contact
discharge)
Connection
**** Transmitter| Inputs: 1x HDMI Type A [19-pin female] Outputs: 1x HDMI
Type A [19-pin female]1x HDBT OUT [RJ45, 8-pin female] Control: 1x IR IN
[3.5mm Stereo Mini-jack]1x IR OUT [3.5mm Stereo Mini-jack] 1x RS-232 [Phoenix
jack]1x SERVICE [Mini-USB, Update port]
**** Receiver| Inputs: 1x HDBT IN [RJ45, 8-pin female] Outputs: 1x
HDMI Type A [19-pin female]1x AUDIO OUT [3.5mm Stereo Mini-jack] Control: 1x
IR IN [3.5mm Stereo Mini-jack]1x IR OUT [3.5mm Stereo Mini-jack] 1x RS-232
[Phoenix jack]1x SERVICE [Mini-USB, Update port]
Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| Transmitter / Receiver:140mm [W] x 65mm [D] x 18mm [H]
Weight| Transmitter: 160g, Receiver: 155g
Power Supply| Input: AC 100 – 240V 50/60HzOutput: DC 24V/1A (Locking
connector)
Power Consumption| 9.36 W
Operating Temperature| 32 – 104°F / 0 – 40°C
Storage Temperature| -4 – 140°F / -20 – 60°C
Relative Humidity| 20 – 90% RH (no condensation)
Resolution / Distance
4K2K| 394ft / 120M
1080P| 492ft / 150M
Resolution / Cable Length| 4K60 – Feet / Meters|
4K30 – Feet / Meters| 1080P60 – Feet / Meters
HDMI IN / OUT| 16ft / 5M| 32ft / 10M| 50ft / 15M
The use of “Premium High Speed HDMI” cable is highly recommended.
Operation Controls and Functions
Transmitter Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | Power LED | Red LED indicates that the transmitter is powered on. |
| 2 | SERVICE port | Firmware update port. |
| **** 3 | **** DC 24V | DC 24V/1A power supply input port. _Note that the |
extender supports PoC function, it means that either transmitter or receiver
is powered on by 24V/1A power adapter, the other one doesn’t need power
supply._
4| HDBT OUT| RJ45 connector for connecting the HDBT IN port of receiver with a
CAT 5e/6 cable.
5| Connection Signal Indicator lamp|
- Illuminating: Transmitter and Receiver are in good connection status.▪ Flashing: Transmitter and Receiver are in poor connectionstatus.
- Dark: Transmitter and Receiver are not connected.
6| Data Signal Indicator lamp|
- Illuminating: HDMI signal with HDCP.
- Flashing: HDMI signal without HDCP.
- Dark: No HDMI signal.
7| HDMI OUT| HDMI loop output for display.
8| HDMI IN| HDMI source input.
9| IR IN| IR input port for receiving the signal of IR remote.
10| IR OUT| IR output port for control of source device. This IR output signal
is from the IR IN port of receiver.
11| RS-232| 3-pin Phoenix connector for RS-232 command
transmission. The RS-232 command will pass-through from transmitter to
receiver or from receiver to transmitter.
---|---|---
Receiver Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | Power LED | Red LED indicates that the receiver is powered on. |
| 2 | SERVICE port | Firmware update port. |
| **** 3 | **** DC 24V | DC 24V/1A power supply input port. _Note that the |
extender supports PoC function, it means that either transmitter or receiver
is powered on by 24V/1A power adapter, the other one doesn’t need power
supply._
4| HDBT OUT| RJ45 connector for connecting the HDBT OUT port of transmitter
with a CAT 5e/6 cable.
5| Connection Signal Indicator lamp|
- Illuminating: Transmitter and Receiver are in good connection status.
- Flashing: Transmitter and Receiver are in poor connectionstatus
- Dark: Transmitter and Receiver are not connected.
6| Data Signal Indicator|
- Illuminating: HDMI signal with HDCP
- Flashing: HDMI signal without HDCP.
- Dark: No HDMI signal.
7| HDMI OUT| HDMI output for display.
8| AUDIO OUT| 3.5mm stereo connector for analog audio output.
9| IR IN| IR input port for receiving the signal of IR remote.
10| IR OUT| IR output port for control of display device. This IR output
signal is from the IR IN port of transmitter.
11| RS-232| 3-pin Phoenix connector for RS-232 command transmission. The
RS-232 command will pass-through from transmitter to receiver or from receiver
to transmitter.
IR Pin Definition
IR Receiver and Blaster pin’s definition is as below:
-
IR RECEIVER
-
IR BLASTER
The following is IR system diagram about IR cable use method
Note: IR remote sends signal at the distance of 0~5 meters / 0~8 meters
with the angle of ± 45° in vertical direction.
Application Example
