BUXFMHT A19 Electronic Smart Lock User Guide

BUXFMHT A19 Electronic Smart Lock User Guide

App

Wifi

Fingerprint

Password

Card

Key

Product Parameters

1. Front gasket
2. Front Panel
3. Front Handle
4. Data cable
5. Inner gasket
6. Battery case
7. Back Handle
8. Back panel
9. Lock body

Installation Instruction

Adjust the Front Handle Direction

1. Loosen the screws.
2. Rotate the handle 180 degrees and fix the direction that you need..

Adjust the Back Handle Direction.

1. Loosen the screw in square hole..
2. Rotate the handle 180 degrees and fix the direction that you need.

Install The Lock

1. Assemble the Mortise Assemble the mortise(c) into the slot which is drilled according to the template.
   

2. Install the front handle screw tube. Make sure the triangle symbol is facing up (very important).
   

3. Assemble the Front Panel Tighter front panel on the door(outside)
   

4. Assemble the back panel Tight the back panel with front panel with the two long screws().
   

Intelligent lock operation

Normal description

1. Press “SET” key for 5s: Restore to factory default mode;
2. Administrator information: Administrator fingerprint/password/IC card;
3. Unlock information: include administrator and user information;
4. Touch key “*”: clear the previous input password key;
5. Touch key “*” then “#” : Menu function.

Factory default mode

1. The default administrator password is 123456, any fingerprint, password or IC card can open the lock in factory default mode.
2. After inputting the administrator information, any fingerprint, password or IC card which are not registered can’ t open the lock.

Language setting (In factory default mode)

The lock come with “English” voice as standard, and you can switch to

Enter system menu

Administrator setting

1. Add administrator information
   

2. Delete administrator information
   

User setting

1. Add user information
   

2. Delete user information by number
   

3. Delete all user information
   

System setting

1. Voice setting
   

2. Unlock mode setting
   

3. Time setting
   

Restore default

Network setting

Download Tuya smart APP

• Download the Tuya Smart app from the App Store or mobile app stores
• Scan to download Tuya Smart app

APP registration and login

• APP registration: if you do not have an APP account, you can choose to register or log in via SMS verification code.
• Click “create a new account” to enter the account registration page. Press the prompt to get the SMS verification code and set the password.
• If you have an account, you can click “login with existing account” to log in the APP. Login mode supports password, verification code, socials count login.
  

Add Wifi door lock

Other notes

1. Input wrong finger or password more than 5 times in a row, the system will be locked for 1 minute.
2. Disguise password function: If you want input password 123456, you can input xxxx123456xxxx to avoid password to be cracked.
3. After battery voltage is down to 4.7V, the system will speak “Please replace battery” every time when unlocked. The lock can be unlocked for about 100 times. Please replace the battery as soon as possible.

Parameters;

• Fingerprints: 100 Users
• Fingerprints + Password + IC Card: 256 Users max
• Password length: 6-12
• Power input: DC 4.4V-6.5V
• Low power alarm: 4.7V
• Standby current: <45uA
• Operation current: <250mA
• Working temperature: -20~65°C
• Working humidity: 15%~95%
• Communication: WIFI(Optional) >
• APP: TUYA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>