MAGNITONE LONDON MLEDGL01W Tri Colour LED Face Mask Instruction Manual

: June 4, 2024
: MAGNITONE LONDON

Table of Contents

CONTENTS
TECHNICAL SPECIFICATION
WARNINGS
PARTS AND ACCESSORIES
GETTING STARTED
HOW TO USE
- ARE YOU READY TO GET LIT?
CUSTOMER SERVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MAGNITONE LONDON MLEDGL01W Tri Colour LED Face Mask

Professional product.
Read the instructions of use carefully.
Keep the box and user manual for future reference.

1 x LED Face Mask
1 x USB Charger Wire
1 x Lealet

TECHNICAL SPECIFICATION

Product: Magnitone GET LIT Tri Colour LED Face Mask
Battery: 3.7 V — 155 mAh
Output Voltage: 5V 1A
Model Number (all covered by this leaflet)

© Magnitone 2021
Registered trademark, owned by:
HSNF Ltd., London, N10 2JE, U.K.
HSNF IE Ltd., Dublin 7, Ireland
Made in China
Model Number: MLEDGL01W

`WARNINGS`

Trust us, you want to read these

YOUR FIRST TIME

‘GetLit’ is a non-invasive LED photon Face Mask, intended to target specific skin concerns, using red, blue and yellow light therapy.

Please note, this is not a medical device and should not be used to treat any medical conditions. GetLit is designed to be used only by individuals in good health. If this is not the case, please consult your doctor before use.

If you experience any abnormal skin irritation, discontinue use immediately.

GetLit is intended for cosmetic use on the face as described. Any consequence resulting from misuse, application to other parts of the body or face, connection to improper voltage sources, dirty contacting elements, alternative preparation gel, or any other improper application is neither the responsibility of HSNF Ltd nor its affiliates.

DO NOT USE IF YOU

Are under the age of 14
Have scarred, broken, inflamed or infected skin
Have eczema, dermatitis or any other skin condition
Have sunburn
Are taking medication that can enhance skin sensitivity (e.g. Certain tablets or creams for acne)
Careful supervision is needed when used by, on or near children or physically or mentally challenged persons.

TECHNICAL – DO NOTS

Do NOT use the mask for any other purpose other than cosmetic facial treatment
Wipe it with a dry cloth ONLY.
Before use – make sure that the USB wire is disconnected from the power source.
If the device begins to overheat, turn the device OFF immediately.
Discontinue use immediately if you suspect the device to be malfunctioning, or not operating properly.
Do not use this product in the bathroom, near basins or in close proximity with any other vessels containing water.
Do not submerge the device in water.
Do not use the device while bathing or showering.
Do not place any heavy objects on top of the mask.
Never press down, or fold the mask.
Never drop or insert any non-specified object on the device.
Keep out of the reach of children and animals. Children should not be present during lamp operation, cleaning and maintenance
Do not disassemble the device as this may cause damage, harm, malfunction, electrical shock, fire or injury. There are no user-serviceable parts inside.
Note: Disassembly voids your warranty.
The battery of the device is not removable by the user. If the device is to be disposed of, do not put into a fire. Dispose of the device as per local regulations.
Do not use the device if you see any signs of internal battery leakage.
Get Lit is intended to be stored and used at room temperature and normal humidity. Do not store Get Lit over the sun or on a hot surface or in a wet room such as a bathroom. High temperatures may be damaging.

The device should be operated, transported and stored in the
manner specified in this user manual.

Failure to use and maintain the device in accordance with the instructions outlined in this manual will void the warranty

DISPOSAL

This product is classed as Electrical or Electronic equipment. Please ensure that at the end of the life of this product it is disposed of in the correct manner in accordance with local authority requirements. It must NOT be disposed of with household waste.

PARTS AND ACCESSORIES

MLEDGL01W Tri Colour LED Face Mask Parts And
Accessories

GETTING STARTED

BEFORE YOUR FIRST TIME

Plug into any USB Socket on a charge plug or computer to charge your device. Charge your device for 2 hours. Whilst on charge, the internal port will glow red, once fully charged the light will turn blue.

HOW OFTEN

For best results, use up to 15 minutes a day. After 15 minutes, the mask will shut off automatically

LIGHT THERAPIES

What’s the best light treatment for you? The colours of light penetrate the skin at different levels, of fering a variety of benefits and treatments:

Blue Light (476-495nm) Blue light therapy targets oil producing follicles, making them less active. It decongests below the skin’s surface and regular use can treat spots, blemishes and reduce the appearance of scars.

Yellow Light (590-620nm) Yellow light therapy stimulates blood flow to the skin. It can be used to treat hyperpigmentation, leaving skin feeling more radiant and glowing.

Red Light (620-750nm)
Red light therapy improves skin firmness and can reduce the appearance of fine lines and wrinkles, giving skin a more radiant glow.

Light Therapies

HOW TO USE

ARE YOU READY TO GET LIT?

Make sure your face is clean and free of makeup.
Take a selfie! It’s the best way to keep track of your skin’s progress.
(optional) Apply a treatment serum or face mask (not included).
Place the mask over your face, making sure that the frames are securely positioned behind your ears.
Press the Power button down for 3 seconds to turn the device on.
The Red LED light will automatically activate.
Press the button again to change between the blue and yellow LED lights.
Relax! Just chill and let the LED work its magic. If you want a shorter treatment, keep an eye on the time, otherwise the mask will shut off automatically after 15 minutes.
Once you’ve finished Getting Lit, complete your skincare routine with your usual serums or moisturiser.
Use a dry cloth to clean the mask and safely store away.