Kelli s Peepers 192pc Readers Display

INTRODUCTION

Before assembling display, remove all packaging materials. Remove clear protective film from mirrors, header, and graphic panels. Set out all hardware and parts. Assemble display on a clean, smooth surface.

BOX CONTENTS

Box #1 :

Includes the main Display unit

HARDWARE

Box #2:
Includes the rotating base unit and all the hardware.

• Display Base
  

• Display hooks (x48)

• Rail POS (x2)

• 6 x 1/2” pan head Sheet metal screws (x2)

• Double sided Tape (X10)

• Leveler (x4)

• POS Holder (x2)

• Mirror (x2)

• Rail hooks (x4)

• Hex Key

• Header POS

• 1/4”-20 x 2.35”Assembly Bolt (x2)

INSTALLATION INSTRUCTIONS

1. Locate the levelers in box 2 and screw all 4 of them into the bottom of the base as shown.

2. With the help of another person holding the display top, attach the display to the base using the 2 assembly bolts and the hex wrench as shown. Once both bolts are in, tighten them down with a hex wrench to secure the top.

3. (A) Take header post and turn the screw on the bottom all the way to the left. (B) Next, push the header holder into the hole on the top of the display. (C) Hold the header holder in place and screw the bottom screw all the way to the right to lock holder in place. Repeat on the second header post. (D) Center the header inside the two holders and screw in the set screws to lock the header in place.
   

4. Peel the blue protective coating off the two POS holders. Next take four pieces of double sided tape and attach them to the corners of the POS holder evenly spaced. Repeat on other POS holder. Next, place POS on rail 1.5” down from the mirror.

5. Attach double side tape to the back of the mirror as shown. Attach mirrors (x2) to side panels. Begin by starting screws #6 x 1/2”(x2). Do not tighten! Slide mirror to side and remove tape on back of mirror. Align mirror so it is vertically straight. Press on to rail and finish tightening screws. Do not over tighten screws!!
   a. If double sided tape is not attached already put a piece on the back of each mirror in this location.

6. Insert all 48 display hooks into the display

If you have any questions please call 219-872-4413 _ Ref: Peepers 192pc

7. Attach both hooks to the display rails as shown.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>