PLANET IPOE-E174 1-Port 802.3bt PoE++ to 4-Port 802.3af-at Gigabit PoE Extender User Manual

: June 13, 2024
: PLANET

Table of Contents

Packet Contents
Hardware Introduction
Installation
Power over Ethernet Budget
Technical Specifications
Physical Dimensions
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**PLANET IPOE-E174 1-Port 802.3bt PoE++ to 4-Port 802.3af-at Gigabit PoE Extender

**

Packet Contents

Thank you for purchasing PLANET Industrial 1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit PoE Extender, IPOE-E174. In the following sections, the term “Industrial PoE Extender” means the IPOE-E174.

Open the box of the IPOE-E174 and carefully unpack it. The box should contain the following items:

Industrial PoE Extender x 1

| User’s Manual x 1

---|---
RJ45 Dust Cap x 5

| Wall Mounting Kit x 1

If any of these are missing or damaged, please contact your dealer immediately; if possible, retain the carton including the original packing material, and use them again to repack the product in case there is a need to return it to us for repair.

Hardware Introduction

This section describes the functionalities of the Industrial PoE Extender’s components.

Front Panel
Figure 2-1 shows the front panel of Industrial PoE Extender.

LED Indicators

System

LED	Color	Function
30W IN	Green	Lights to indicate the IPOE-E174 is working in 2-pair mode

and offers up to 30-watt power.
60W IN| Green| Lights to indicate the IPOE-E174 is working in 4-pair mode and offers more than 60-watt power.
90W+ IN| Green| Lights to indicate the IPOE-E174 is working in 4-pair mode and offers more than 90-watt power.

PoE Power Usage

LED	Color	Function
20W	Amber	Blinks to indicate the system is providing 10W ~ 20W PoE

power.
Lights to indicate the system is providing 20W ~ 30W PoE power.
40W| Amber| Blinks to indicate the system is providing 30W ~ 40W PoE power.
Lights to indicate the system is providing 40W ~ 50W PoE power.
60W| Amber| Blinks to indicate the system is providing 50W ~ 60W PoE power.
Lights to indicate the system is providing 60W+ PoE power.

Per PoE Output Port (Port 1 ~ 4)

LED	Color	Function
LNK/ACT

Green

| Lights to indicate the port is linked up.
Blinks to indicate that the IPOE-E174 is actively sending or receiving data over that port.
PoE-in- Use| Amber| Lights to indicate the port is providing PoE power.
OFF to indicate the connected device is not a PoE PD.

Grounding the Device
Users MUST complete grounding wired with the device; otherwise, a sudden lightning could cause fatal damage to the device.

Note
EMD (Lightning) DAMAGE IS NOT CONVERED UNDER WARRANTY.

Installation

This section describes the functionalities of the Industrial PoE Extender’s components and guides you to installing it on the DIN rail and wall. Please read this chapter completely before continuing.

Note
This following pictures show how to install the device. However, the device in the picture is not the IPOE-E174.

**DIN-rail Mounting Installation

**

**Wall-mount Plate Mounting

**

Connecting IPOE-E174 to PSE

The Industrial PoE Extender has five RJ45 ports of which one is the PoE++ In port connected to the PSE and the other four are PoE+ Out ports connected to the PDs.

Step 1: Connect a standard Cat5e/6 UTP cable from a remote PSE, such as PoE switch, to the “PoE++ In” port of the IPOE-E174.
Step 2: The PSE delivers both Ethernet Data and PoE power over UTP cable to the IPOE-E174 and the “PoE IN” LED will be lit steadily.
Note
1. When the LED turns steady green, it means the IPOE-E174 is being powered successfully with PoE.
2. If the LED is not lit, please check the remote PSE or the cable connecting to a PC or a network device to see if the cable is correct. Or with an 802.3at device such as the target PD, check whether the power injection is correct.
3. Never connect any non-standard PoE PSE to the IPOE-E174; it will damage the device permanently.
4. Refer to Chapter 2.2 for more information about LED function.

Connecting IPOE-E174 to PD

Step 1: Connect the additional Cat5e/6 cable from the PoE+ Out of the IPOE-E174 to a remote PD.
Step 2: The PoE+ Out port is also the power injector, which transmits DC voltage to the Cat5e/6 cable and transfers data and power simultaneously between the PSE and PD.
Step 3: Once the IPOE-E174 detects the existence of an IEEE 802.3at/af device, the PoE-in-Use LED indicator will be lit steadily, showing it is providing power.

Note

If the connected device is not fully complying with IEEE 802.3af/at standard or in-line power device, the PoE-in-Use LED indicator of the IPOE-E174 will not be lit steadily.
According to IEEE 802.3af/at standard, the IPOEE174 will not inject power to the cable if not connecting to a standard IEEE 802.3af/at device.
DO NOT connect any PSE to port 1~ port 4 of the IPOE-E174; it may damage the device permanently.

Power over Ethernet Budget

The following table lists how many PoE devices can be powered by the IPOE-E174 under 1m distance:

Power Source	PoE Output Budget*	Max. Number of PDs supported
95W PoH PSE	75 watts max.	Class 4 PD@25 watts
Class 3 [email protected] watts	4 units
Class 2 PD@7 watts	4 units

90W 802.3bt

PoE++ Type 4 PSE

PoE++ Type 3 PSE

Remarks:

The PoE output budget means the aggregated power output of the 4 PSE ports.
The aggregated power consumption will be below 60 watts if with PoE+ PSE.
Please check the power input LED for optimal power output.

Technical Specifications

Model	IPOE-E174

Hardware Specifications
Network Connector| PoE In Port

– 1 x 10/100/1000BASE-T Ethernet with 802.3bt PoE++ “Data + DC” in

– Auto MDI/MDI-X, auto-negotiation RJ45 connector

PoE Out Port

– 4 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/at PoE “Data + DC” out

– Auto MDI/MDI-X, auto-negotiation RJ45 connector

Contact 6KV DC

Surge Protection| 6KV
Enclosure| IP30 metal case
Installation| DIN-rail kit and wall-mount ear
Dimensions (W x D x H)| 32 x 87.8 x 135 mm
---|---
Weignt| 430g
Power Consumption| 5.6 watts/19.11 BTU (Power On)

6.5 watts/22.18 BTU (Full loading without PoE function)

82.3 watts/280.82 BTU (Full loading with

PoE function)

Power over Ethernet
PoE Standard| PoE in Port

– IEEE 802.3bt PoE++ Type 4 standard PD

– PoH (Power over HDBASE-T)

– IEEE 802.3at PoE+ end-span/mid-span PD

Per PoE Out Port

IEEE 802.3at Power over Ethernet Plus end-span PSE

PoE Power| PoE in Port

50~57V DC, max. 95 watts

Per PoE Out Port

44~55V DC, max. 30.8 watts

Power Pin Assignment| PoE in Port

1/2(-), 3/6(+), 4/5(+), 7/8(-) or 1/2(+),

3/6(-), 4/5(+), 7/8(-)

Per PoE out Port

1/2(+), 3/6(-)

PoE Power Budget| 75 watts (max.) @ 802.3bt PoE++ Type 4 input

60 watts (max.) @ 802.3bt PoE++ Type 3 input

75 watts (max.) @ PoH input

25 watts (max.) @ 802.3at PoE+ input

---|---
Standards Conformance
Regulatory Compliance| FCC Part 15 Class A, CE
Stability Testing| IEC60068-2-32 free fall IEC60068-2-27 shock

IEC60068-2-6 vibration

Standards Compliance| IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Flow Control

IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus

IEEE 802.3bt Power over Ethernet Plus Plus

Environment
Operating| Temperature: -40 ~ 75 degrees C

Relative Humidity: 5 ~ 95% (non- condensing)

Storage| Temperature: -40 ~ 85 degrees C

Relative Humidity: 5 ~ 95% (non- condensing)

Physical Dimensions

The IPOE-E174’s dimensions (W x D x H) are 32 x 87.8 x 135 mm.

Customer Support

Thank you for purchasing PLANET products. You can browse our online FAQ resource and user’s manual on PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET switch support team.
PLANET online FAQs:
https://www.planet.com.tw/en/support/faq
Switch support team mail address:
[email protected]

Copyright © PLANET Technology Corp. 2022.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.