VIVITAR V80015 Bluetooth Speaker User Guide
- June 13, 2024
- Vivitar
Table of Contents
VIVITAR V80015 Bluetooth Speaker
Product Information
The product is a speaker with a maximum power rating of 1A. It features a
power button and an LED indicator.
Product Usage Instructions
- Ensure the speaker is charged and turned on.
- To pair the speaker with a device, press and hold the power button for 5 seconds.
- While in pairing mode, the LED indicator will flash quickly, emitting a blue light.
- Once the speaker is successfully paired with a device, the LED indicator will stop flashing.
Specifications
- Bluetooth Range: Up to 33 feet (10 meters)
- Charging Input: DC5V 1A max
- Play Time: 2 hours
- Applicable at 50% of maximum volume.
- Results will be lower when the volume is higher.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sakar International is under license. Other trademarks and trade names are those of their respective owners.
A Quick Look
- POWER ON/OFF
- VOLUME DOWN / LAST SONG
- PLAY/ PAUSE-ANSWER / END CALLS
- MODE
- MICRO USB PORT
- VOLUME UP / NEXT SONG
Charging
- Insert the included charging cable’s Micro-USB ends in the charging port.
- Insert the charging cable’s standard USB end into the USB port of a computer or a suitable wall adapter (not included).
- The red LED Charging Indicator light will be on while the unit is charging and will be off when fully charged.
Bluetooth Pairing
- take the unit out of the box
- Press the power button for 5 seconds to enter into pairing mode, the blue LED light will flash quickly. After successfully paired the blue LED light will not flash.
- On your phone, go to the Bluetooth page in the Settings app. Make sure Bluetooth is on before connecting to the available device “V80015 Speaker”
Music Controls
- Press the Mode button to switch between music modes. (Once switch back to BT mode, Pressplay button again to play music)
- Press to Play/Pause music.
- When the conn is receiving
- Press to answer
- Press and hold
- No handsfree
- Press the + button to go to the next song.
- Press and hold the + button to turn the volume up.
- Press the – button to go to the previous song.
- Press and hold the – button to turn the volume down.
Label
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>