VIVITAR V80021 Headphones User Guide

VIVITAR V80021 Headphones

Product Usage Instructions

• Charging
  • Use a DC5V 1A power source for charging.
  • Connect the USB-C charging cable to the USB-C charging port on the headphones.
  • The indicator light will show the charging status.
• Controls
  • To adjust the volume or skip to the next track, press the VOL+/Next Track button.
  • To decrease the volume or go back to the previous track, press the VOL-/Previous Track button.
  • Press the Power button to turn the headphones on or off.
  • The Pause/Play/Answer button can be used for controlling playback or answering calls.
• Microphone Usage
  • The microphone hole is located on the headphones for hands-free calling. Speak clearly towards the microphone for optimal performance.
• FCC Compliance
  • This device complies with part 15 of the FCC Rules. It should not cause harmful interference and must accept any interference received.
  • FCC Warning: Any changes or modifications not approved by the responsible party could void the user’s authority to operate the equipment.
  • The device meets general RF exposure requirements and can be used in portable exposure conditions without restrictions.

FAQs

• Q: How do I know if the headphones are fully charged?
  • A: The indicator light will show a solid colour when the headphones are fully charged.
• Q: Can I use the headphones for making phone calls?
  • A: Yes, the headphones have a microphone hole for hands-free calling functionality.

Specifications

• Bluetooth Range: Up to 33 feet (10 meters)
• Charging Input: DC5V 1A max
• Memory Card Support: Up to 32GB
• Play Time: 6 Hours

Applicable at 50% of maximum volume. Results will be lower when the volume is higher. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sakar International is under license.  Other trademarks and trade names are those of their respective owners.

A Quick Look

1. VOL+/Next Track
2. VOL-/Previous Track
3. Power
4. USB-C Charging Port
5. Indicator light
6. Pause/Play/Answer
7. Microphone hole

Charging

1. Insert the included charging cable’s USB-C end into the charging port.
2. Insert the charging cable’s standard USB end into the USB port of a computer or a suitable wall adapter (not included).
3. The red LED Charging Indicator light will be on while the unit is charging and will be off when fully charged.

Bluetooth Pairing

1. Press and hold the power button for about 5 seconds to turn on your headphones. Once your headphones are turned on they will go into Bluetooth pairing mode. The red and blue indicator light start to flash.
2. On your phone, go to the Bluetooth page in the Settings app. Make sure Bluetooth is on before connecting to the available device ” V80021 Headphones”
3. The blue light indicators will start to flash slowly after Bluetooth pairing is successful.

Music Controls

• Press to Play/Pause your track.
• Press to pick up/end a call.
• Press and hold to reject a call.
• Press to switch between
• Press to lower the volume.
• Press and hold to go to the previous track.
• Press to raise the volume.
• Press and hold to go to the next track.

FCC

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC warning:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>