V7 L238IPS-E 23.8″ FHD 1920×1080 IPS LED Monitor User Guide

V7 L238IPS-E 23.8″ FHD 1920×1080 IPS LED Monitor

Product Information

• Product Name: V7 23.8 FHD 1920×1080 IPS LED Monitor
• Model: L238IPS-E
• Panel Size: 23.8 inches
• Panel Type: IPS
• Aspect Ratio: 16:9
• Maximum Resolution: 1920 x 1080
• Brightness: 220 nits
• Contrast Ratio: 1200:1
• Response Time: 14 ms
• Color Depth: 16.7 million colors
• Input Ports: DisplayPort, HDMI, VGA
• VESA Mount: 100 x 100 mm
• Power Input: AC 100V-240V 50-60Hz
• Warranty: 3 years

Product Usage Instructions

To use the V7 23.8 FHD IPS LED Monitor, follow these instructions:

Package Contents

• Monitor with Stand
• HDMI Cable
• Power Cord
• Power Adapter (AC/DC 12V/2.5A)
• 2 x M4x12 Screws
• 2 x M4x30 Screws
• Quick Installation Guide
• Warranty Card

Mounting (Optional)

If you want to mount the monitor on a wall, you need to purchase a separate wall mount. Refer to the wall mount’s instructions for proper installation.

Connections

Connect the monitor to your computer or other devices using one of the available input ports: DisplayPort, HDMI, or VGA.

Power On/Off

To turn on the monitor, press the POWER button on the control panel. To turn off the monitor, press the POWER button again.

Adjusting Picture Settings

Use the control panel and the OSD (On-Screen Display) to adjust various picture settings:

• Brightness: Adjust the brightness level.
• Contrast: Adjust the contrast level.
• Black Boost: Enable/disable black boost feature.
• Blue Light: Adjust the blue light level.
• DCR (Dynamic Contrast Ratio): Enable/disable dynamic contrast ratio.
• Note: View additional notes about picture settings.
• Auto Config: Automatically configure display settings.
• H. Position: Adjust horizontal position.
• V. Position: Adjust vertical position.
• Focus: Adjust focus level.
• Clock: Adjust clock settings.

Adjusting Color Settings

Use the control panel and the OSD to adjust color settings:

• Gamma: Adjust gamma value.
• Color: Adjust color temperature (Warm/Normal/Cool/Blue Light/User).
• RGB Values: Individually adjust RGB values.

Adjusting Audio Settings

Use the control panel and the OSD to adjust audio settings:

• Volume: Adjust the volume level of the internal speakers.

OSD Settings

Use the control panel and the OSD to adjust OSD settings:

• Language: Select desired language for the OSD.
• OSD Time Out: Adjust time limit for the OSD.
• Transparency: Adjust OSD visibility in foreground.

System Settings

Use the control panel and the OSD to adjust system settings:

• Input: Select desired input source (HDMI/VGA/DP).
• Auto Source: Enable/disable auto source selection.
• Wide Mode: Select aspect ratio (Aspect/Full).
• DDC/CI: Enable/disable Display Data Channel (DDC) / Command Interface (CI).
• Quick Start Mode: Enable/disable VSeven start-up image.

Information

The OSD provides information about the monitor:

• Technical Specs: Display technical specifications.
• Package Dimensions: Display package dimensions.
• Product Dimensions: Display product dimensions.

Refer to the user manual for additional information, care and maintenance instructions, troubleshooting, and safety precautions.

Quick Installation Guide

MOUNT OPTION (Wall Mount Sold Separately)

shadows to be more visible
Blue Light:| To adjust Blue Light levels OFF/25%/50%/75%/100%. Blue Light Disabled if DCR is ON
DCR:| Dynamic Contrast Ratio
Note:| Adjusting H. Position, V. Position, Focus, & Clock is grayed out if connected via HDMI or DisplayPort.
Auto Config:| Automatic configuration of the below parameters ONLY if connected via VGA Analog signal
H. Position:| To move image Horizontally
V. Position:| To move image Vertically
Focus:| To adjust the phase position of the analog signal
Clock:| To adjust the clock of analog signal

the display can extend to 16:9 full screen
 | mode. Full Screen mode does not apply at high resolution settings.
DDC/CI:| To turn On/Off Display Data Channel (DDC) / Command Interface (CI)
Quick Start Mode:| Select On & Off VSeven Start up image

L238IPS-E

V7 23.8” FHD 1920×1080 IPS LED Monitor
General| Technical
Sku: CD36507| MTBF: 30,000 hrs
Model: L238IPS-E| Panel Size: 23.8 in
EAN: 0662919114898| Panel Type: IPS
Warranty: 3 years| Power Input: AC 100V-240V 50-60Hz
Compliance: CE, Energy Star, FCC, ICES, RoHS, UKCA,| Aspect Ratio: 16:9
WEEE| Response Time: 14 ms
Country Of Origin: China| Viewing Angle: 178°H / 178°V
Package Type: One Color| Maximum Resolution: 1920 x 1080
ASIN: B09M8RN319| Screen Coating: Matte
SAP: 5349840| Brightness: 220 nits
Package Includes: Monitor with Stand, 2 x M4x12, 2| Color Depth: 16.7 million colors
x M4x30, Quick installation guide, HDMI Cable, US| EU/UK Energy Rating: F
Power Cord, Power Adapter, Warranty Card| Contrast Ratio: 1200:1
Color| Input Port: DisplayPort, HDMI, VGA
Color: Black| VESA Mount: 100 x 100 mm
Package Dimensions| Input AC Plug Type: BS 1363 (UK) and Schuko (EU)
Package Dimensions (L/W/H): 59.4 x 12.3 x 38.6 cm| Stand: 18.8 cm (7.4 in) Height / 22.9 cm (9 in) x 18.9 cm (7.4 in) Base
(23.4 x 4.8 x 15.2 in)| Speaker: 2 x 2W
Shipping Weight: 3.4 kg (7.5 lbs)| Monitor Dim (w/o Stand): 54.2 x 32.1 x 5.3cm (21.3 x 12.6 x 2.1in)
Package Weight: 3.4 kg (7.5 lbs)| Pixel Pitch (H/V): 0.2745 (H) x 0.2745 (V)
Product Dimensions| Horizontal Frequency: 60Hz
Product Dim (L/W/H): 54.2 x 19 x 40.9 cm (21.3 x 7.4 x 16 in)| Display Area (H x L): 52.7 cm x 29.6 cm
Product Weight: 2.76 kg (6.1 lbs)|
 |

Care

• Avoid exposing your monitor directly to sunlight or other heat source. Place your monitor away from the sun to reduce glare.
• Put your monitor in a well ventilated area.
• Do not place any heavy things on top of your monitor
• Make certain your monitor is installed in a clean and moisture-free area.
• Keep your monitor away from magnets, motors, transformers, speakers, and TV sets.

Safety Tips

• If smoke, abnormal noise or odor came out from your monitor, caution you should remove the power cord immediately and call your service center.
• Never remove the rear cover of your monitor cabinet. The display unit inside contains high-voltage parts and may cause electric shock to human bodies.
• Never try to repair your monitor yourself. Always call your service center or a qualified technician to fix it.

No Power

• Make sure A/C power cord is securely inserted to both the AC-INLET socket on the monitor and wall outlet.
• Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage.
• Make sure all signal cables are installed.

Power on but no screen image

• Make sure the video cable supplied with the monitor is tightly secured to the video output port on back of the computer. If not, tightly secure it.
• Adjust brightness

Wrong or abnormal colors

• If any colors (red, green, blue) are missing, check the video cable to make sure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection
• Connect the monitor to another computer

Safety Precautions

This monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy.

WARNINGS

• This monitor should be operated only at the correct power sources indicated on the label on the rear end of the monitor. If you’re unsure of the power supply in your residence, consult your local dealer or power company.
• Do not try to repair the monitor yourself as it contains no user-serviceable parts. The monitor should only be repaired by a qualified technician.
• Do not remove the monitor cabinet. There is high-voltage parts inside that may cause electric shock to human bodies, even when the power cord is disconnected.
• Stop using the monitor if the cabinet is damaged. Have it checked by a service technician.
• Put your monitor only in a clean, dry environment. Unplug the monitor immediately if gets wet and consult your service technician.
• Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply non-ammonia based cleaner onto the cloth, not directly onto the glass screen.
• Keep the monitor away from magnetic objects, motors, TV sets, and transformer.
• Do not place heavy objects on the cable or power cord.
• Due to safety concerns, if the VESA mounting kit is purchased separately, please make sure the mounting kit is UL-Listed, and replaceable only by service personnel.

FCC RADIO FREQUENCY INTERFERENCE STATEMENT

WARNING: (FOR FCC CERTIFIED MODELS)
This monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation. This monitor generates, uses, and can radiate radio frequency energy. Harmful interference to radio communication may be led as a result if it‘s not properly installed and used. However, there is no guarantee that interference will not occur in a particular installation. If this monitor does cause serious interference to radio or television reception, resetting the monitor may determine it. Moreover, users are encouraged to correct interference by doing one or more of the following:

• Reorient or relocate the receiving antenna.
• Move the monitor and the receiver further away from each other.
• Connect the monitor into an outlet on a circuit different from that to which the receiver is connected.
• Consult your local dealer or an qualified technician.

FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes or modifi-cations to this monitor would void the user‘s authority to operate this device.
Each country in the European Union should have its collection centers for electrical and electronic equipment recycling. For information about your recycling drop off area, please contact your related electrical and electronic equipment waste management authority or the retailer where you bought the product.
Note: If necessary, shielded interface cables and AC power cord must be used to meet the emission level limits.

Regulatory Information: Disposal of Waste Electrical and Electronic Equipment (WEEE) The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimize the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on your V7 product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of life. Please kindly be aware that this is your responsibility to dispose electronic equipment at recycling centers so as to help conserve natural resources.
Each country in the European Union should have its collection centers for electrical and electronic equipment recycling. For information about your recycling drop off area, please contact your related electrical and electronic equipment waste management authority or the retailer where you bought the product.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>