Gofi GOPODS Wireless Earbuds User Manual
- June 13, 2024
- Gofi
Table of Contents
Gofi GOPODS Wireless Earbuds
- Thank you for choosing Gofi We’re happy to help you understand how to use this product. Read on!
Product Picture
- Touch Panel
- Earbuds light
- LED Display
- charlie case
- Einvare
Touch Function
PHONE CALL:
- Answer the Call
- Single tap on the left or right earbud
- Reject the Call
- Long press left or right earbud for 2 seconds Hang up the Call
- Single tap on the left or right earbud
PLAY MUSIC
- Music Play/ Pause
- Doubt tap on the left or right earbud when in music mode Volume up/down
- Single tap on the right earbud to increase the volume
- Single tap on the left earbud to decrease volume Change Track Charging
- Triple tap on the left earbud for the previous song
- Triple tap on the right earbud for the next song
Voice Assistant:
- 4 Tap the left or right earbud to enable the voice assistant
Power ON/OFF & Connection
Power On
- open the Charging case, Take out the earbuds will pair automatically
Connection
- Open the charging box, Take out the,earbuds will pair automatically,red & blue light on earbuds flash alternately. After two earbuds pairing successfully, the Blue light on the earbud will flash alternately , then the earbuds start searching Bluetooth device.
- Start the Bluetooth function of the mobile phone or other devices.Please click the “Search for Bluetooth device” option and click for “Gopods” in the list to connect. After connecting with the mobile phone, light on two earbuds will be off .
- The two earbuds can also connect with the mobile phone separately. The operation method can be operated according to the above step 2 operation method.
Power Off
- Put the earbuds into the charging case, and close the charging case.
Charging Case& Earbuds
Charging the Case:
- Charging Box: When Type C cable plug in the charging box, the charging box are charged,and the LED display on the charging box will flash, When battery is full, the LED display on charging case will show “OK”.
Charging the Earbuds
- Earbuds: Put back the earbuds into charging box,the red light on earbuds will be on all the time when charging. After charging finished, the earbuds light will be off.
Specification
| Product name | GOODS |
|---|---|
| Bluetooth Version | V5.3 |
| Working Range | 10m |
| Standby Time | 120h |
| Charging Case Battery Capacity | 400mAh |
Earbuds Capacity
| 40mAh
Music Play Time
| 7-8h
Charging time| 1-2h
Support Mode| A2DP,AVRCP,HSP,HFP
Packing List
- Earphone x1 , Cable x1, User Manual x1,Ear caps×3 pairs (S M L)
Caution Dos and Don’ts
To ensure safe operations for your headset, please follow these rules:
- Keep the headset away from excessive water, and do not immerse anywhere.
- When not in use, switch off the headset to conserve battery.
- If the product is defective, kindly do not attempt to fix it yourself. W recommend professional help.
- Do not use attachments that are not meant for the headset.
- Only use a dry, soft cloth to clean the earphones…
ANC Options
- Long press the TOUCH PANEL to switch the mode of ANC
- GOFI
- Shen Gofi Electronic Co.; Ltd
- Floor 2, A Bld, Zhengchangda Science Park, Zhancheng Community,23 Jianan Road, Baoan District, Shenzhen Guangdong China
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
This equipment complies with FCC’s RF radiation exposure limits set forth for
an uncontrolled environment. This device and its antenna(s) must not be co-
located or conjunction with any other antenna or transmitter.