Sound Control Technologies RTK-PRO Remote Table Kit Pro User Guide
- June 13, 2024
- Sound Control Technologies
Table of Contents
Sound Control Technologies RTK-PRO Remote Table Kit Pro
Product Information
The RemoteTableKitTM (RTK-PROTM) is an application guide for the RTK- TransmitterTM Table Module and RTK-ReceiverTM Codec Module. It includes RM- PROTM Adaptors that are male TRRS to Euro-Block connectors. The kit also includes adaptors, USB 2.0 device (client), and supports up to three Cisco microphones, such as CiscoTableMic20, 60, J&E. The SCTLinkTM Cable is used for Ethernet/POE, Cisco Mic TRRS, HDMI, audio I/O, and USB connections up to 100m CAT5e/CAT6.
SCTLinkTM Cable Specs
- Integrator-Supplied CAT5e/CAT6 STP/UTP Cable EIA568A or EIA568B pinout
- Cable length: 10m-100m minimum/maximum length
Please note that the SCTLinkTM cable must always be a single, point-to-point CAT cable with no couplers or interconnections.
Module Dimensions
- RTK-TXTM: H: 1.39″ (35mm) x W: 10.22″ (259mm) x D: 4.51″ (114mm)
- RTK-RXTM: H: 1.39″ (35mm) x W: 10.22″ (259mm) x D: 4.51″ (114mm)
Product Usage Instructions
- Connect the RTK-TransmitterTM Table Module to the RTK-ReceiverTM Codec Module using the SCTLinkTM Cable.
- Ensure that the SCTLinkTM Cable used is a single, point-to-point CAT5e/CAT6 cable without any couplers or interconnections.
- If using Cisco microphones, connect them to the RTK-TransmitterTM Table Module. Up to three Cisco microphones are supported.
- For USB connections, use the RM-PROTM Adaptors to convert the male TRRS connectors to Euro-Block connectors.
- If using a laptop, connect it to the RTK-ReceiverTM Codec Module using an HDMI cable.
- If using a Cisco Touch10, connect it to the RTK-ReceiverTM Codec Module via Ethernet/POE. The Cisco Touch10 should be provided by Cisco.
- Ensure that the 48V Phantom power is disabled on any microphone input of the codec that is connected to the RTK-PROTM. Failure to do so may result in long-term failure of the RTK-PROTM microphone audio channel(s) and will void the warranty.
- The RTK-PROTM is compatible with Cisco SX80, Codec Pro, Room 70, Room 70G2, Room 70DualG2, and Room Kit Pro.
Application Guide
RemoteTableKit™RTK-PRO™ Application Guide
Cable Specs
SCTLink™CableSpecs
Integrator-SuppliedCAT5e/CAT6STP/UTPCable EIA568AorEIA568B(10m-100m
min/maxLength)
Dimensions
Module Dimensions
- RTK-TX™:H: 1.39”(35mm)xW:10.22”(259mm)xD:4.51”(114mm)
- RTK-RX™:H: 1.39”(35mm)xW:10.22”(259mm)xD:4.51”(114mm)