uleFone 3109 Armor Pad User Manual

uleFone 3109 Armor Pad

Product Information:

• Function: BT(BR+EDR) BLE, WIFI 802.11b/g/n (HT20, HT40), Wi-Fi 5.2G (802.11a/n20/n40/ac20/ac40/ac80), Wi-Fi 5.8G (802.11a/n20/n40/ac20/ac40/ac80), GSM/GPRS/EGPRS 900, GSM/GPRS/EGPRS 1800, WCDMA B1, WCDMA B8, LTE FDD B1, LTE FDD B3, LTE FDD B7, LTE FDD B8, LTE FDD B20, LTE FDD B28, LTE TDD B38, LTE FDD B40 FM GPS
• Operation Frequency: Max RF output power varies for different frequencies
• FCC Caution: The device should not be co-located or operated in conjunction with any other antenna or transmitter

Product Usage Instructions:

1. Ensure the device is powered on.
2. To utilize the BT(BR+EDR) and BLE functions, make sure the device is within range of the desired Bluetooth device.
3. To connect to a Wi-Fi network, navigate to the Wi-Fi settings menu and select the appropriate network based on the desired frequency (2.4 GHz or 5 GHz).
4. For GSM/GPRS/EGPRS connectivity, ensure the device supports the required frequency bands (900 and 1800 MHz).
5. To use WCDMA, LTE FDD, or LTE TDD networks, ensure the device supports the corresponding frequency bands (B1, B8, B3, B7, B20, B28, B38, and B40).
6. For FM and GPS functionality, ensure the device has the necessary hardware and software support.
7. Follow the specified limits for RF output power based on the frequency being used.
8. Take caution to comply with FCC regulations and avoid interference with other devices.

Note: For detailed instructions on specific features and functionalities, refer to the full user manual provided with the product.

Instruction for Card Installation

1. Micro SD/Nano-SIM/Nano-SIM

Network Bands

• GSM: 900/850/1800/1900 (B2/3/5/8)
• WCDMA: 2100/1900/1700/850/900 (B1/2/4/5/8)
• LTE-FDD2100/1900/1800/1700/850/2600/900/700/700/850/800/700/700 (B1/2/3/4/5/7/8/12/17/19/20/28A/28B)
• LTE-TDD: 2600/2300/2500 (B38/B40/B41)

Device Layout

1. Power Key/Side Fingerprint Sensor
2. Customized Button
3. Front Camera
4. Receiver
5. Light Sensor /Proximity Sensor
6. LED Indicator Light
7. Nano-SIM/Micro SD Slot
8. Speaker
9. 3.5mm Headphone lack
10. Type-C Charging Port
11. Flash
12. Rear Camera
13. uSmart Expansion Connector
14. Volume

GETTING STARTED

1. Charging the battery
   Connect the supplied USB cable to the Type- connector of the tablet.
   Connect the cable to the adapter and the adapter to the mains.
   The tablet begins to charge and the battery indicator is shown on the screen.

2. Long press the ON / OFF button to start.
   WARNING:
   Charge the battery fully during the first charge and prior to first use.

Contained in the box

CE Warning

1. Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
2. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BYAN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDINGTO THE INSTRUCTIONS.
3. The product shall only be connected to a USB interface of version USB2.0.
4. Adapter shall be installed near the equipment and shall be easily accessible.
5. Operation temperature:-10-40C
6. The plug considered as disconnect device of adapter.
7. SAR: The device complies with RF specifications when the device used at 5mm from your body (SAR limit 2.0W/Kg), The device is in compliance with the require- ments.

This information has to be presented in such a way that the user can readily understand it. Typically, this will necessitate translation into every local language (required by national consumer laws) of the markets where the equipment is intended to be sold. Illustrations, pictograms and using international abbreviations for country names may help reduce the need for translation.

Restrictions in the 5 GHz band:
According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium
(BE), Bulgaria (BG), the Czech Republic (CZ), Denmark
(DK), Germany (DE), Estonia (EE), Ireland (IE), Greece
(EL), Spain(ES), France (FR), Croatia (HR), Italy (IT),Cyprus (CY), Latvia (LV), Lithuania(LT), Luxembourg (LU),Hungary (HU), Malta (MT), Netherlands (NL), Austria(AT),Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI),Slovakia (SK), Finland (FI), Sweden (SE), the United
Kingdom (UK), Turkey (TR), Norway(NO), Switzerland(CH), Iceland (IS), and Liechtenstein (LI).
The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range.

ulefone®
All Rights Reserved
Google, Android, Google Play, YouTube and other marks are trademarks of Google LLC.
The information contained herein is subject to change without notice. The only warranties for Connect and services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Connect shall not be liable for technical or editorial errors omissions contained herein.
Shenzhen Gotron Electronic CO., LTD
Address: Floor 7, Building A, Block 1, Anhongji Tianyao Plaza,Longhua District, Shenzhen City, Guangdong Province China

Service Center
Email: service@ulefone.com

www.ulefone.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>