ZEISS DTC 3/38 Thermal Imaging User Guide
- June 13, 2024
- Zeiss
Table of Contents
DTC 3/38 Thermal Imaging
User Guide
Accurate. In the
darkness.
ZEISS DTC 3/38
Firmware Update – ZEISS DTC 3/38
Version: SHL22111611
Release Note
We would like to thank our loyal community, trade partners and the media for the extensive feedback we have received since the release of the ZEISS DTC 3/38. We strive to fulfill their wishes in the best possible way in the future. With this firmware update, we are adding important features to the DTC 3/38 that will make the hunting experience even more successful and comfortable.
With this firmware update we added some features and improvements to the DTC 3/38, including:
- Enhanced image quality
- Reduced display brightness
- Auto-off function
Installing the Update
- Note that the firmware update can only be carried out using the ZEISS Hunting App.
- Make sure that you have installed the latest version of the ZEISS Hunting App.
- Make sure that you activated mobile data before starting the ZEISS Hunting App
- Do not switch off or operate the DTC 3/38 during the update process!
-
You’ll receive a push notification when you launch the ZEISS Hunting app on your smartphone – simply tap the “Update” button.
-
Before updating, make sure that your ZEISS DTC 3/38’s battery is fully charged, and that the device is connected to your smartphone via WLAN.
-
The update will be performed automatically. The process will take a few moments.
-
The new Firmware is being sent to your ZEISS DTC 3/38. This can take a few minutes. Do not turn off your ZEISS DTC 3 during the update!
After the new firmware has been successfully transmitted to your ZEISS DTC 3/38, it will be processed on your product:
• One the update is complete; the product will shut down and the Bluetooth will be disconnected
• Turn back on your ZEISS DTC 3/38, enable Bluetooth in the menu and reconnect from the Hunting App.
-
Done! You can immediately begin enjoying the new features of your ZEISS DTI 3 thermal imaging camera!
Features
Enhanced image quality
The image quality of a thermal device can always be further enhanced by
developing new algorithms that render the image in new and better ways. With
this update we offer you an even better image quality than before and keep you
in the loop of ever better getting technology, without having to invest in a
new device after just a few seasons in use.  Auto-OFF
The new auto-off function turns the device off when it is not in use, e.g. when stored. This will prevent any power supply issues in case you forget to switch your DTC 3/38 off after the hunt. If no button is pressed, the device will switch itself off after 3 hours. If you press a button, the time will reset itself to 3 hours.
Become part of the ZEISS Community.
Follow us on Social Media.
www.facebook.com/ZEISSHunting_EU
www.youtube.com/user/zeisssportsoptics
@zeisshunting_EU
Carl Zeiss AG
Consumer Products
Carl-Zeiss-Straße 22
73447 Oberkochen
Germany
www.zeiss.com/thermal-imaging
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>