Arlux LIGHTING KLIP 8w Bathroom Strip Instruction Manual
- June 13, 2024
- Arlux LIGHTING
Table of Contents
Arlux LIGHTING KLIP 8w Bathroom Strip
Product Information
- Product Name: KLIP
- Languages: FR, EN, DE, IT, ES, PL
- Product Codes: 3297021151287, 3297021151294, 3297021151300, 3297021151317
- Power:
- 8W (for the first and third product)
- 15W (for the second and fourth product)
- Brightness: > 80
- IP Rating: IP 44
- Voltage: 220/240V
- Dimensions:
- First Product: 41×5.1×6.2 cm
- Second Product: 60×5.3×6.5 cm
- Third Product: 49.2×5.9×6.6 cm
- Fourth Product: 68.2×5.9×6.6 cm
Product Usage Instructions
- Ensure the power supply is compatible with the voltage requirements (220/240V).
- Choose the appropriate product code based on your preference.
- Install the KLIP in a location suitable for its IP 44 rating, ensuring protection against water splashes.
- Connect the KLIP to the power supply.
- Turn on the KLIP using the power switch or button.
- Adjust the brightness level as desired. The KLIP provides a brightness of > 80.
- Enjoy the illumination provided by the KLIP.
Features
- Integrated LED circuit
| | | | |
---|---|---|---|---|---
3297021151287| 8W| > 80| IP 44| 220/240V| 41×5,1×6,2 cm
3297021151294| 15W| > 80| IP 44| 220/240V| 60×5,3×6,5 cm
3297021151300| 8W| > 80| IP 44| 220/240V| 49,2×5,9×6,6 cm
3297021151317| 15W| > 80| IP 44| 220/240V| 68,2×5,9×6,6 cm
- Electrical products must not be thrown out with domestic waste. They must be taken to a communal collecting point for environmentally friendly disposal in accordance with local equations. Contact your local authorities or stockist for advice on recycling.
- L: Live: brown wire
- N: Neutral: blue wire
- For indoor use only
- Product conforms to European Union Directives
- Light source replaceable by a professional (LED only)
- Power supply replaceable by a professional
- Class II, double insulated, earthless
- ref.115128
- ref.115129
- Earth: green/yellow wire
- ref.11513C
- ref.115131
- Not compatible with a dimmer
This product contains a light source of energy class:
General safety instructions
- The product must be installed by an electrician or any other qualiffed person and in accordance with the standards in force in the country of installation. To carry out the installation or any maintenance or servicing work, disconnect the power from the electrical network.
- Do not look directly at the light source.
- Never touch the product when it is in operation, or when it has just been switched off.
- Do not use a damaged or modified power cord to avoid any risk of fire or electric shock.
- Before use, make sure that the product has not been damaged. Ifdeterioration is observed, do not use the product.
- The flexible exterior cable or cord of this fixture cannot be replaced. If the cable is damaged, the luminaire must be recycled.
Power
Power off
Power on
Installation Instructions
Wiring
Warranty
- Warranty: 3 Years
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>