DIGITAL WATCHDOG DWC-DSWM Wall Mount Bracket User Guide
- June 13, 2024
- DIGITAL WATCHDOG
Table of Contents
DIGITAL WATCHDOG DWC-DSWM Wall Mount Bracket
WHAT’S IN THE BOX
Camera Mounting Screws (12.7mm)| 
| 4| Mounting Pad| | 1
---|---|---|---|---|---
Quick Setup Guide| | 1| Mounting Template| | 1
Screws and Plastic Anchors| | 4| | |
NOTE: Download all your support materials and tools in one place.
- Go to: http://www.digital-watchdog.com/resources
- Search your product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part numbers will populate automatically based on the part number you enter.
- Click ‘Search’. All supported materials, including manuals and quick start guide (QSGs) will appear in the results.
INSTALLATION
-
Mark and drill the necessary holes on the mounting surface.
-
Secure the mounting bracket to the mounting surface using the screws and anchors included with the mount. Use the mounting pad between the bracket’s arm and mounting surface as needed.
-
To mount the camera to the mounting accessory, remove the dome from the camera base using the wrench included with the camera.
NOTE: Do not touch the lens when handling the camera. -
Pass wires through and make all necessary connections.
-
Secure the camera to the mounting bracket using the included screws.
-
Adjust the camera’s lens modules’ position and angle and place the cover dome on the camera base to complete the installation.
CUSTOMER SERVICE
Tel: +1 866-446-3595 /
813-888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com