Style 45990AEXLG 27-in 6 Hook Rail Instruction Manual
- June 4, 2024
- Style
Table of Contents
Style 45990AEXLG 27-in 6 Hook Rail
Thank you for purchasing this Style Selections brand product. We’ve created
these easy-to-follow instructions to ensure you spend your time enjoying the
product instead of putting it together. But, if you need more information than
what is provided here, please visit Lowes.com
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
877-888-8225, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
[email protected] or visit
www.lowespartsplus.com.
MODEL #45990AEXLG #45990CHXLG
ITEM #670155 #3700634
TROUBLESHOOTING
- PROBLEM
- Rail not level
- POSSIBLE CAUSE
- Original measurements are inaccurate
- CORRECTIVE ACTION
- Re-install starting with level marks
CARE AND MAINTENANCE
On an annual basis, it is recommended to double-check all connections and re- tighten all screws and anchors. Clean with a lightly damp cloth or towel using water only to protect the durability of the finish on hooks and the rail.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
- The maximum load for this decorative rail, regardless of mounting application, is 35 lbs
When drilling into the wall, avoid any electrical wiring or plumbing that may be located behind the wall. Damaged electrical wiring can cause electrical shock and/or fire.
PREPARATION
Before beginning installation of product, make sure all parts are present. Compare parts with package contents list diagram above. If any part is missing or damaged, do not attempt to install the product
- Estimated Assembly Time: 10 minutes
Tools Required for Assembly (not included):
Drill with 3/32 in. and 5/16 in. drill bits, Phillips screwdriver
Helpful Tools (not included): Level, Pencil
TOOLS REQUIRED
FEELING CONFIDENT? START YOUR NEXT PROJECT
Visit Lowes.com for more information
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
- Temporarily place rail (A) in the desired location and mark mounting hole locations
- For solid wood/wood stud installations, remove rail (A) and drill 3/32 in. pilot holes at marks.
- For drywall installations, remove rail (A) and drill 5/16 in. pilot holes at marks. Place anchors (BB) into holes.
- For all other installation types, note different hardware (not included) might be needed. Follow manufacturer’s instructions.
- Secure rail (A) to the mounting surface with screws (AA). Optional: Place hole covers (CC) into the screw holes on rail (A) to cover screw
STYLE SELECTIONS and logo design are trademarks or registered trademarks
of LF, LLC. All rights reserved.
Printed in China