KINGSTAR S03H Smart Watch User Manual

KINGSTAR S03H Smart Watch

Product Information

• This device is designed to comply with Part 15 of the FCC Rules, which ensures that it operates without causing harmful interference. It is also required to accept any interference it may receive, including interference that could potentially disrupt its operation.
• Please note that making changes or modifications to this unit without the express approval of the responsible party for compliance may void the user’s authority to operate the equipment.
• It is important to ensure that this device and its antenna(s) are not placed or used in conjunction with any other antenna or transmitter.
• The device has been evaluated and found to meet the general RF exposure requirements for portable use without any restrictions.

Product Usage Instructions

1. Ensure that the device is placed in an area with sufficient ventilation to prevent overheating.
2. Connect the device to a power source using the provided power cable.
3. Turn on the device by pressing the power button located on the device.
4. Follow the on-screen instructions or refer to the user manual for initial setup and configuration.
5. For optimal performance, keep the device away from other antennas or transmitters to prevent interference.
6. Use the device according to its intended purpose and follow any additional instructions provided in the user manual.
7. When not in use, it is recommended to turn off the device and disconnect it from the power source.
8. If you experience any issues or require assistance, refer to the troubleshooting section of the user manual or contact customer support.

Downloading the App

Scan the following QR code, download and Install the App.

Charging and Active

• Charging the device to active before the first time using;
• To charge your device, plug the charging cable into the adapter or USB port on your computer.

Pairing

Device Blustaoth name:

• KW-S03 (Synchronize data on the phone)
• KW-S03 Call (Synchronize calls and music on the phone)
• The MAC address on the “Setting*-“About” page could help you kentity your device on the scanning list.

Use the Touch Screen

Smart Watch Features

sleep

• If you keep wearing Smart Watch in your sleep, it can provide the hours slept and quallty of sleep stats on both the screen and the APP.
• NOTE: Sleep stats reset to zero at 8:00 pm.

Heart Rate Test

• The Smart Watch could record your heart rate all day.
• You also could tap on the page to start measuring heart rate.

Sports

• Smart Watch automatically tracks Steps taken on the screen.
• NOTE: Your movement stats reset to zero at midnight.

Training

• Tap the training Icon on the menu to start a new training measure recording, there are & sport modes to be chosen.
• The last training recording will be shown on the training page.

Smart Watch Features

Blood Pressure Test

• Tap on the blood pressure page to start measuring your blood pressure.
• On the blood pressure page, It can show the blood pressure measured data of the last times.

Sp02 Test

• Tap the Sp02 page to start measuring your Spoz.
• On the 5p02 page, It can show the Spo2 measured data of the last times.

Weather

• It could show the weather info of current and tomorrow on the weather page.
• Weather Info is synced after con- necting with the APP, it will not be updated after a long disconneted.

Messages Reminder

• The device can sync Incoring not fications from Twitter, Facebook,
• Whatsapp, Instagram etc.
• Recently 5 messages can be stored.
• Note: You can switch of/off the Incoming notification in the APP.

Remote Shutter

• After connecting the device, you can remote contral the camera on your phone.

Player Shutter

• After connecting the device,you can remote contral the musk player on your phone.

Other Features

• Other features Include stopwatch, alarm, timer, brightness, mute onfoff, theater mode, factory reset, power off and about.

Stop Watch

• Tap the start button on stopwatch page to start timing, and tap the stop button to stop timing.

Silent Alarms

• Set up the alarm on the APP, the device will vibrate to remind on time.

Theater Mode

• The device will turn off the vibration and trun down the brightness when the theater mode Is truned on.
• Note You can trun on/off the theater mode in the control center.

Remind to Move

• The device will vibrate to remind you to make a relax after 1 hour sitting.
• Note: You can switch on/off the feature In the APP.

Remind to Drink

• The smart watch will remind you
• Time to Drink Some Water” at the planned drinking time.
• Note: You can set the feature In tht APP.

Getting to Know Your Device

1. Using in Wet Conditions
   • Your device Is water resistant, which means it is rain-proof and splash-proof and can stand up to even the sweatiest workout.
   • NOTE; Do not swim with your Smart Bracelet. We also dont recommend showering with your wristband; though the water won’t hurt the device, wearing it 24/7 does not give your skin a chance to breathe. Whenever you get your bracelat wet, dry It thoroughly bafore putting it back on.
2. Using Quick View
   • with Quick Vlew you can check the time or the message form your phone on your Smart Bracelet without taping. Just turn your wrist towards you and the time screen will appear for a few seconds.

Environmental Conditions

1. Operating temperature:

   • 14°F to 122F (-10°C to 50° Non-operating temperature: -49 to 140°F (-20°C to 60°C

2. SIze

   • Fits a wrist batween 5.5 and 7.7 Inches in dircumference.

3. Disposal and Recycling

   • Please kindly be aware that It is the consumer’s responsibllity to property dispose and recycle Smart Bracelet and accompanying components, Do not dispose of Smart Bracelet with common household waste, the Smart Bracalet unit Is considered electron waste and should be disposed of at your local electronic equipment collection fadlity.
     For more Information, please contact your local electronic equlpment waste management authority or the retaller where you bought the product,

4. Why Is the watch unable to play music and make Bluetooth calls?

   • Open on the mobile phone: Settings – Bluetooth, check KW-903 and KW-903 Call’s connection status.KW-S03 and KW-S03 Call are connected, the device to achleve audlo functionallty. If KW-B05 Is connected and KW-803 Call Is not connected, then you need to manually click on KW-S03 Call on your phone to connect.If the manual connection is not successful, you need to unbind the device In the APP, click the Icon © In the Bluetooth status bar, choose to Ignore this device, and then re-enter the APP for pairing operation.

Specification

Note: Measurement data cannot be used as a basis for medical diagnosis.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>