BOSCH UniversalPump 18V Cordless Compressed Air Pump Instruction Manual

: June 13, 2024
: Bosch

Table of Contents

BOSCH UniversalPump 18V Cordless Compressed Air Pump
Product Information
Product Usage Instructions
Safety Instructions
Product Description and Specifications
Technical Data
Mounting and Operation
Maintenance and Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BOSCH UniversalPump 18V Cordless Compressed Air Pump

BOSCH-UniversalPump-18V-Cordless-Compressed-Air-Pump-
product

Product Information

Product Name: Bosch UniversalPump 18V
Manufacturer: Robert Bosch Power Tools GmbH
Model Number: 1 609 92A 7HC
Country of Origin: Germany

Product Description
The Bosch UniversalPump 18V is an electric and cordless pump designed for various applications. It features a compact design and is powered by an 18V battery. The pump comes with a range of accessories, including a manometer, an LED work light, volume and valve adapters, a ball needle, and a hose. It has a maximum pressure of 10.3 bar (150 psi) and a flow rate of 30 l/min. The pump is compatible with recommended Bosch 18V batteries.

Product Usage Instructions

Safety Instructions:

Read all safety warnings, instructions, illustrations, and specifications provided in the user manual.
Ensure that the power tool is used in a safe working environment.
If operating the power tool in a damp environment, use a residual current device to reduce the risk of electric shock.
Take necessary precautions to ensure personal safety while using the power tool.

Usage and Handling of the Power Tool:

Avoid short-circuiting between the battery contacts to prevent burns or fire.
Only have the power tool repaired by qualified personnel using original spare parts to maintain its safety.
Do not leave the pump unattended.

Product Components:

Manometer
Battery charge level indicator
Battery release button
Battery
On/Off switch
Power lock switch
Storage compartment lid
Hose holder
Hose clamp
Pressure hose
Work light
Volume adapter
Valve adapter
Ball needle

Technical Specifications:

Model: UniversalPump 18V
Part Number: 1 609 92A 7HC
Operating Voltage: 18V
Flow Rate: 30 l/min
Maximum Pressure: 10.3 bar (150 psi)
Weight: As per EPTA Procedure 01:2014A)
Recommended Batteries: PBA 18V…W-, AL 18…

Battery Usage:

To charge the battery, insert it into the battery compartment until it clicks into place.
To remove the battery, press the battery release button and slide the battery out.
Use the battery charge level indicator LED to check the battery status.

Maintenance and Service:

Follow the maintenance and cleaning instructions provided in the user manual.
Contact customer service or visit the official website for further assistance and support.

Transportation and Disposal:

Follow the transportation guidelines provided in the user manual.
Dispose of the product and batteries according to local regulations.

Safety Instructions

General Power Tool Safety Warnings
WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cord-less) power tool.

Work area safety

Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded sur-faces, such as pipes, radiators, ranges and refrigerat-ors. There is an increased risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suit-able for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is un-avoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

Personal safety

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal in-juries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal in-jury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
If devices are provided for the connection of dust ex-traction and collection facilities, ensure these are connected and properly used. Use of dust collection can re-duce dust-related hazards.
Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe in-jury within a fraction of a second.

Power tool use and care

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was de-signed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or re-move the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be per-formed. Use of the power tool for operations different from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Battery tool use and care

Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

Safety Instructions for Air Pumps

When using the air pump, take care not to exceed the permitted pressure of the product to be inflated. The product may burst or rupture and you may injure yourself.
The hose and metal parts of the adapters can overheat when working for long periods. Schedule breaks when working for long periods and leave the parts to cool down if necessary.
Do not leave the air pump unsupervised.
Use a calibrated measuring tool to check the pressure of your product after inflating it. An incorrect pressure may lead to dangerous situations, e.g. your car handling differently.
Do not allow children to use the air pump. Do not direct the air hose or air flow at people’s or animals’ mouths, ears or eyes and do not blow any dust or other particles at people or animals. This can lead to injury.
Stop using the air pump if the indicator or other parts are defective. The permitted pressure of the product to be inflated could be exceeded and this may lead to dangerous situations.
Do not open the battery. There is a risk of short-circuiting.
In case of damage and improper use of the battery, vapours may be emitted. The battery can set alight or explode. Ensure the area is well ventilated and seek medical attention should you experience any adverse effects. The vapours may irritate the respiratory system.
The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit may occur, causing the battery to burn, smoke, explode or overheat.
Only use the battery with products from the manufacturer. This is the only way in which you can protect the battery against dangerous overload.
Protect the battery against heat, e.g. against continuous intense sunlight, fire, dirt, water and moisture. There is a risk of explosion and short-circuiting.

Product Description and Specifications

Read all the safety and general instructions. Failure to observe the safety and general instructions may result in electric shock, fire and/or serious injury. Please observe the illustrations at the beginning of this operating manual.

Intended Use
The air pump is intended for pumping up bicycle, motorcycle and car tyres and small inflatable toys, sporting goods and beach items.
It is not suitable for pumping up large-volume inflatable items (e.g. air mattresses).
The air pump is intended only for household and domestic use.

Product Features
The numbering of the product features refers to the illustration of the air pump on the graphics page.

Pressure gauge
Battery charge indicator
Battery release buttona)
Rechargeable batterya)
On/off switch
Lock-off button
Lid of the adapter storage compartment
Hose bracket
Hose clamp
Pressure hose
Worklight
Volume adapter
Valve adapter
Ball needle adapter
Storage compartment locking mechanism
Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.

Technical Data

$BOSCH-UniversalPump-18V-Cordless-Compressed-Air-Pump- $5$$ $BOSCH-UniversalPump-18V-Cordless- Compressed-Air-Pump- $6$$

Depends on battery in use
The following chargers are not compatible with the PBA re-chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV

Noise/Vibration Information
Noise emission values determined according to EN 62841‑1.
Typically, the A-weighted sound pressure level of the power tool is 78 dB(A). Uncertainty K = 3 dB. The noise level when working can exceed the volume stated. Wear hearing pro-tection!
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841‑1:
ah = 1.8 m/s2, K = 1.5 m/s2.
The vibration level and noise emission value given in these instructions have been measured in accordance with a standardized measuring procedure and may be used to com-pare power tools. They may also be used for a preliminary estimation of vibration and noise emissions.
The stated vibration level and noise emission value represent the main applications of the power tool. However, if the power tool is used for other applications, with different ap-plication tools or is poorly maintained, the vibration level and noise emission value may differ. This may significantly increase the vibration and noise emissions over the total working period.
To estimate vibration and noise emissions accurately, the times when the tool is switched off or when it is running but not actually being used should also be taken into account. This may significantly reduce vibration and noise emissions over the total working period.
Implement additional safety measures to protect the operator from the effects of vibration, such as servicing the power tool and application tools, keeping their hands warm, and organizing workflows correctly.

Rechargeable battery
Bosch sells some cordless power tools without a re-chargeable battery. You can tell whether a rechargeable battery is included with the power tool by looking at the pack-aging.
Charging the battery

Use only the chargers listed in the technical data. Only these chargers are matched to the lithium-ion battery of your power tool.

Note: Lithium-ion rechargeable batteries are supplied partially charged according to international transport regulations. To ensure full rechargeable battery capacity, fully charge the rechargeable battery before using your tool for the first time.

Inserting the Battery
Push the charged battery into the battery holder until it clicks into place.

Removing the Battery
To remove the rechargeable battery, press the battery re-lease button and pull the battery out. Do not use force to do this.

Battery charge indicator
The battery charge indicator indicates the state of charge for a few seconds when the on/off switch is half or fully pressed.

The three LEDs in the battery charge indicator and the pressure gauge lighting flash simultaneously when the temperature of the rechargeable battery is outside the operating temperature range and/or the overload protection has been triggered.

Recommendations for Optimal Handling of the Battery
Protect the battery against moisture and water.
Only store the battery within a temperature range of −20 to 50 °C. Do not leave the battery in your car in the summer, for example.
A significantly reduced operating time after charging indicates that the battery has deteriorated and must be replaced.
Follow the instructions on correct disposal.

Mounting and Operation

Select the adapter best suited to the intended application:

Valve adapter (13), e.g. for many bike valves.
Ball needle adapter (14), e.g. for footballs.
Volume adapter (12), for small beach items or sporting goods, e.g. beach balls.

For standard car tyre valves (sometimes also used on bikes), no adapter is required.

Press the locking mechanism of the storage
compartment (15) inwards, open the lid (7) of the adapter storage compartment and remove the appropriate adapter. If present, remove the valve cap on the item to be inflated.

Winding up and Unwinding the Pressure Hose (10) (see figure A):

$BOSCH-UniversalPump-18V-Cordless-Compressed-Air-Pump- $2$$

Unwind the pressure hose (10) by releasing it from the hose clamps (9).
When winding up the pressure hose (10), ensure that it is held by the hose clamps (9).

Connecting the Air Pump to the Valve (see figure B):

$BOSCH-UniversalPump-18V-Cordless-Compressed-Air-Pump- $3$$

Valve adapter (13): Firstly, screw the adapter onto the valve. Then screw the adapter fully into the pressure hose (10).
Ball needle adapter (14) and volume adapter (12): Firstly, screw the adapter fully into the pressure hose (10). Then tighten the pressure hose (10) with the adapter in the valve.
If no adapter is required, tighten the pressure hose (10) on the valve.

The current pressure (bar/psi) in the connected item is shown on the pressure gauge (1).

Inflation:

Press the lock-off button (6) to the left (see figure C). Press the on/off switch (5) to switch on the air pump and to start pumping. At the same time, the work light (11) and the pressure gauge lighting are switched on.
$BOSCH-UniversalPump-18V-Cordless-Compressed-Air-Pump- $4$$
Do not look into the work light; it can blind you.
If the required pressure is displayed on the pressure gauge (1), release the on/off switch (5). The work light (11) and pressure gauge lighting go out and the air pump is switched off.
Once work is complete, lock the on/off switch by pressing the lock-off button (6) to the right (see figure C).
Note: When pumping for longer periods, stop pumping after approximately 5 minutes and leave the hose and metal parts of the adapter to cool for at least 5 minutes.

Maintenance and Service

Maintenance and Cleaning

Remove the rechargeable battery from the air pump before carrying out any work on the air pump (e.g. maintenance, tool change, etc.) as well as when trans-porting and storing the air pump. There is risk of injury from unintentionally pressing the on/off switch.
To ensure safe and efficient operation, always keep the air pump and the ventilation slots clean.

After-Sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. You can find explosion drawings and information on spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about our products and their accessories.
In all correspondence and spare parts orders, please always include the 10‑digit article number given on the nameplate of the product.

Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair.

Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at: www.bosch- pt.com/serviceaddresses

Transport
The recommended lithium-ion batteries are subject to legislation on the transport of dangerous goods. The user can transport the batteries by road without further requirements.
When shipping by third parties (e.g.: by air transport or for-warding agency), special requirements on packaging and la-belling must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is required.
Dispatch battery packs only when the housing is undam-aged. Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging. Please also observe the possibility of more de-tailed national regulations.

Disposal

Air pumps, battery packs, accessories and packaging should be sorted for environmental-friendly recycling.
Do not dispose of air pumps and batteries/rechargeable batteries in household waste!

Only for EU countries:
According to the Directive 2012/19/EU on waste electrical and electronic equipment and its transposition into national law, air pumps that are no longer usable, and, according to the Directive 2006/66/EC, defective or drained batteries must be collected separately and disposed of in an environmentally correct manner.
If disposed incorrectly, waste electrical and electronic equipment may have harmful effects on the environment and human health, due to the potential presence of hazardous substances.

Only for United Kingdom:
According to The Waste Electrical and Electronic Equipment Regulations 2013 (SI 2013/3113) (as amended) and the Waste Batteries and Accumulators Regulations 2009 (SI 2009/890) (as amended), products that are no longer us- able must be collected separately and disposed of in an environmentally friendly manner.

Battery packs/batteries:
Li-ion:
Please observe the notes in the section on transport (see “Transport”,).