Zambelis LIGHTING 22146 Lampadario suspended Pendant Light Instruction Manual

Zambelis LIGHTING 22146 Lampadario suspended Pendant Light

Connecting the Terminal Block

Connect the main supply (brown – Live, blue – Neutral) into the terminal block making sure all connections are tight.

Tools

Please read the instructions before commencing installation and retain them for future reference.

SPECIFICATIONS

• Material: Metal + Smoked Glass + Opal Glass
• Lamp Type: 3x G9 Led, MAX 5W / Bulb
• Ingress Protection: IP20. Protection against entry of solid objects greater than 12mm in diameter.

INSTALLATION INSTRUCTIONS

WARNING
Electrical products can cause death. injury. or damage to property.
Maintenance and installation should only be carried out by a professional electrician.

• Ensure the main supply is switched off.
• Insert masonry plugs (1) into the mounting surface.
• Fit the mounting bracket onto the mounting surface with self-tapping screws (2).
• Connect main supply wires to terminal block (3) making sure all connections are tight.
• Fit the ceiling plate onto the mounting bracket with screws (4).
• The light is adjustable, place the cables in the position that works for you. Insert masonry plugs (5) into the mounting surface, and repeat two times.
• Fit the mounting bracket onto the mounting surface with self-tapping screws (6). Repeat two times.
• Pass the cable through the hanging accessories and secure it by screwing the safety caps (7), repeat two times.
• Use the rings to secure all glass shades on the lamp-holders (8).
• Install all G9 LED lamps into the lamp holders, and finally add the opal glasses (9).
• Reconnect power.

WARNING

• Make sure that the products are installed properly before connecting to electricity.
• Do not cover the fitting.
• Not for outdoor use or in wet conditions.
• Do not exceed the maximum wattage rating of the lamp.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>