BOSCH WGA14400TH Washing Machine User Manual

BOSCH WGA14400TH Washing Machine

Safety

Observe the following safety instructions.

General information

• Read this instruction manual carefully.
• Keep the instruction manual and the product information safe for future reference or for the next owner.
• Do not connect the appliance if it has been damaged in transit.

Intended use
Only use this appliance:

• For washing machine-washable fabrics and hand-washable wool in accordance with the care label.
• With tap water and commercially available detergents and care products suitable for washing machines.
• in private households and in enclosed spaces in a domestic environment.
• up to an altitude of max. 4000 m above sea level.

Restriction on user group
This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. Do not let children play with the appliance. Cleaning and user maintenance must not be performed by children unless they are being supervised. Keep children under the age of 3 years and pets away from the appliance.

Safe installation
WARNING ‒ Risk of electric shock! Incorrect installation is dangerous.

• Connect and operate the appliance only in accordance with the specifications on the rating plate.
• Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
• The protective conductor system of the domestic electrical installation must be properly installed. The installation must have a sufficiently large cross-section.
• When using a residual current circuit breaker, only use a type with the mark.
• Never equip the appliance with an external switching device, e. g. a timer or remote control.
• When the appliance is installed, the mains plug of the power cord must be freely accessible. If free access is not possible, an all-pole isolating switch must be installed in the permanent electrical installation according to the installation regulations.
• When installing the appliance, check that the power cable is not trapped or damaged. If the insulation of the power cord is damaged, this is dangerous.
• Never let the power cord come into contact with hot appliance parts or heat sources.
• Never let the power cord come into contact with sharp points or edges.
• Never kink, crush or modify the power cord.

WARNING ‒ Risk of fire!
It is dangerous to use an extended power cord and non-approved adapters.

• Do not use extension cables or multiple socket strips.
• Only use adapters and power cords approved by the manufacturer.
• If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted.

WARNING ‒ Risk of injury!
The high weight of the appliance may result in injury when lifted.

• Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall.
• Only stack the dryer on a washing machine using the connection kit from the dryer manufacturer. No other installation method is permitted.
• Do not install the appliance in a washer-dryer stack if the dryer manufacturer does not offer a suitable connection kit.
• Do not install appliances from different manufacturers and with varying depths and widths in a washer-dryer stack.
• Do not install a washer-dryer stack on a platform; the appliances may tip over.

WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it and suffocate.

• Keep packaging material away from children.
• Do not let children play with packaging material.

CAUTION ‒ Risk of injury!
The appliance may vibrate or move when in use.

• Place the appliance on a clean, even, solid surface.
• Align the appliance using the appliance feet and a spirit level. If hoses and power cords have been laid incorrectly, this causes a tripping hazard.
• Lay hoses and power cords in such a way that there is no risk of tripping.

If the appliance is moved by holding onto protruding components, such as the appliance door, the parts may break off.

• Do not move the appliance by holding onto protruding parts.

CAUTION ‒ Risk of cutting!
Touching sharp edges on the appliance may lead to cuts.

• Do not touch the sharp edges on the appliance.
• Wear protective gloves when installing and transporting the appliance.

Safe use
WARNING ‒ Risk of electric shock!
If the appliance or the power cord is damaged, this is dangerous.

• Never operate a damaged appliance.
• Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
• If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box and turn off the water tap.
• Call customer services.
• An ingress of moisture can cause an electric shock.
• Only use the appliance in enclosed spaces.
• Never expose the appliance to intense heat or humidity.
• Do not use steam- or high-pressure cleaners, hoses or sprays to clean the appliance.

WARNING ‒ Risk of harm to health!
Children can lock themselves in the appliance, thereby putting their lives at risk.

• Do not install the appliance behind a door as this may obstruct the appliance door or prevent it from opening.
• With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.

WARNING ‒ Risk of suffocation!
Children may breathe in or swallow small parts, causing them to suffocate.

• Keep small parts away from children.
• Do not let children play with small parts.

WARNING ‒ Risk of poisoning!
Detergents and care products may result in poisoning if consumed.

• If accidentally swallowed, seek medical advice.
• Keep detergents and care products out of the reach of children.

WARNING ‒ Risk of explosion!
Laundry that has been pretreated with cleaning agents that contain solvents may cause an explosion in the appliance.

• Rinse pretreated laundry thoroughly with water before washing.

CAUTION ‒ Risk of injury!
The covering plate may break if you stand on or climb onto the appliance.

• Do not stand on or climb onto the appliance. The appliance may tip over if you sit on or lean against the open door.
• Do not sit on or lean against the appliance door.
• Do not place any objects on the appliance door. Reaching into the drum while it is still turning may cause hand injuries.
• Wait for the drum to come to a complete stop before reaching inside.

CAUTION ‒ Risk of scalding!
When you wash at high temperatures, the detergent solution gets hot.

• Do not touch the hot detergent solution.

CAUTION ‒ Risk of chemical burns!
If the detergent drawer is opened, detergent and care products may spray out from the appliance. Contact with eyes or skin may cause irritation.

• Rinse eyes and/or skin thoroughly with clean water if they come into contact with detergents or care products.
• If accidentally swallowed, seek medical advice.
• Keep detergents and care products out of the reach of children.

Safe cleaning and maintenance
WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.
• Only use genuine spare parts when repairing the appliance.
• If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person in order to prevent any risk. An ingress of moisture can cause an electric shock.
• Do not use steam- or high-pressure cleaners, hoses or sprays to clean the appliance.

WARNING ‒ Risk of injury!
The use of non-original spare parts and non-original accessories is dangerous.

• Only use the manufacturer’s original spare parts and original accessories.

WARNING ‒ Risk of poisoning!
Poisonous fumes may be given off if you use cleaning agents that contain solvents.

• Do not use cleaning agents that contain solvents.

Preventing material damage

ATTENTION! The functionality of the appliance may be impaired if you use the wrong quantity of fabric softener, detergent, care product or cleaning agent.

• Follow the dosage recommendations from the manufacturer.
• Exceeding the maximum load capacity impairs the function of the appliance.
• Observe the maximum load capacity for each program and do not exceed it.
• The appliance is secured for transportation using transit bolts. Transit bolts that have not been removed may result in material damage and damage to the appliance.
• Before starting up the appliance, remove the transit bolts completely and keep them in a safe place.
• Before transport, fit the transit bolts fully in order to prevent damage in transit.
• Material damage may be caused if the water inlet hose is connected incorrectly.
• Tighten the screw connections on the water inlet until they are hand-tight.
• Ideally, connect the water inlet hose directly to the water tap, without any additional connecting elements such as adapters, extensions, valves or similar.
• Ensure that the inner diameter of the water tap is at least 17 mm.
• Make sure that the length of the thread on the connection to the water tap is at least 10 mm.
• If the water pressure is too high or too low, the appliance may not be able to operate properly.
• Ensure that the water pressure in the water supply system is at least 100 kPa (1 bar) and max. 1000 kPa (10 bar).
• If the water pressure exceeds the maximum value specified, a pres-sure-reducing valve must be installed between the drinking water connection and the hose set of the appliance.
• Do not connect the appliance to the mixer tap of an unpressurized hot-water boiler.
• Modified or damaged water hoses may result in material damage and damage to the appliance.
• Never kink, crush, modify or cut through water hoses.
• Only use the water hoses supplied with the appliance or genuine spare hoses.
• Never re-use water hoses that have been used before.
• Operating the appliance using water that is dirty or too hot may lead to material damage and damage to the appliance.
• Only operate the appliance with cold mains water.
• Unsuitable cleaning products may damage the surfaces of the appliance.
• Do not use harsh or abrasive detergents.
• Do not use cleaning products with a high alcohol content.
• Do not use hard scouring pads or cleaning sponges.
• Clean the appliance with nothing but water and a soft, damp cloth.
• Remove all detergent residue, spray residue or other residues immediately if they come into contact with the appliance.

Environmental protection and saving energy

Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.

• Sort the individual components by type and dispose of them separately.

Save energy and conserve resources
If you follow these instructions, your appliance will use less electricity and less water.

• Choose programmes with low temperatures and longer wash times and use maximum load capacity.
  • Energy consumption and water consumption is most efficient.
• Add detergent based on the laundry degree of soiling.
  • For light to normal soiling, a smaller amount of detergent is sufficient. Observe the dosage recommendation from the detergent manufacturer.
• Reduce the washing temperature for lightly and normally soiled laundry.
  • At lower temperatures, the appliance consumes less energy. For light to normal soiling, lower temperatures than indicated on the care label are also sufficient.
• Set the maximum spin speed if you want to dry the laundry in the tumble dryer afterward.
  • The drier the laundry, the shorter the programme duration when drying which, in turn, reduces energy consumption. A higher spin speed reduces the residual moisture in the laundry and increases the volume of the spin noise.
• The appliance has a continuous automatic load adjustment function.
  • Depending on the type of fabric and load capacity, the continuous automatic load adjustment function optimally adjusts the water consumption and programme duration.

Energy saving mode
If you do not use the appliance for an extended period, it automatically switches to energy-saving mode. The energy-saving mode ends when you use the appliance again.

Installation and connection

Unpacking the appliance
ATTENTION!
Objects remaining in the drum that are not designed for operation with the appliance may cause material damage and damage to the appliance.

• Remove these objects, along with all supplied accessories, from the drum before starting the appliance.
  1. Remove any packaging and protective covers completely from the appliance.
  2. Check the appliance for visible damage.
  3. Open the door.
  4. Remove any accessories from the drum.
  5. Close the door.

Contents of package
After unpacking all parts, check for any damage in transit and completeness of the delivery.
ATTENTION! If the appliance is operated with incomplete or defective accessories, the appliance may not be able to operate properly, or this may result in material damage or damage to the appliance.

• Do not operate the appliance with incomplete or defective accessories.
• Replace the accessories in question before operating the appliance.

Note:  The appliance has been tested at the factory to check it is in working order. As a result, water stains may remain in the appliance. These marks will disappear after the first wash cycle.
The delivery consists of the following: ¡ Washing machine

• Accompanying documents
• Transit bolts
• Cover caps
• Water inlet hose

Requirements for the installation location
WARNING-Risk of electric shock!
The appliance contains live parts. Touching live parts is dangerous.

• Do not operate the appliance without a cover cap.

WARNING-Risk of injury!
When using the appliance on a base, the appliance may tip over.

• Always secure the feet of the appliance to a base using the manufacturer’s fixing brackets before using the appliance for the first time.

ATTENTION!
If residual water in the appliance freezes, this may cause damage to the appliance.

• Do not install or operate this appliance anywhere that is liable to experience frost or outdoors.
• If the appliance is tilted at an angle greater than 40°, residual water may leak out of the appliance and cause material damage.
• Tilt the appliance carefully.
• Transport the appliance in an upright position.

Installation location Requirements

Removing the transit bolts
The appliance is secured for transportation using transit bolts on the rear of the appliance.
Note: Keep the transit bolt screws and the sleeves in a safe place for future transport.

1. Pull the hoses out of the holders.
2. Unscrew  1 and  2 remove all of the screws for the 4 transit bolts using a WAF 13 wrench.
3. Remove the power cable from the holder.
4. Remove the 4 sleeves.
5. Put on the 4 cover caps.
6. Push the 4 cover caps downwards.
   Note: To install the transport locks to transport the appliance, perform these steps again in the reverse or-der.

Connecting the appliance
Connecting the water inlet hose

1. Connect the water inlet hose.
2. Connect the water inlet hose to a tap (26.4 mm = 3/4″).
3. Open the water tap carefully and check that the connection points are tight.

Water outlet connection types
This information is intended to help you to connect this appliance to the water outlet.
ATTENTION! When draining, the water outlet hose is subject to water pressure and may come loose from the installed connection point.

• Secure the water outlet hose against unintentional loosening.
  Note:  Observe the draining heights. The maximum draining height is 100 cm.

Connecting the appliance to the electricity supply
Note: Your electrical domestic installation for this appliance must comply with the local legal provisions and safety regulations, and should include a residual current circuit-breaker.

1. Insert the mains plug of the appliance’s power cable in a socket nearby.
   The connection details of the appliance can be found under Technical data.

2. Check the mains plug is inserted properly.

Aligning the appliance
In order to reduce noise and vibration and to prevent the appliance from moving, align the appliance correctly.

1. Use a WAF 17 wrench to loosen the lock nuts in a clockwise direction.

2. To align the appliance, turn the appliance’s feet. Check that the appliance is level using a spirit level.
   All appliance feet must stand firmly on the ground.

3. Use a WAF 17 wrench to tighten the lock nuts against the housing until they are hand-tight.
   In doing so, hold the foot tight and do not adjust its height.

Familiarising yourself with your appliance

Appliance
You can find an overview of the parts of your appliance here.

On certain models, specific details such as the colour and shape may differ from those pictured.

Detergent drawer
Note: Observe the manufacturer’s instructions on the use and dosage of the detergent and care product and the information in the programme descriptions.

Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.

Before using for the first time

Prepare the appliance for use.

Starting an empty washing cycle

Your appliance was inspected thoroughly before leaving the factory. To remove any residual water, run the first wash cycle without any laundry.

1. Turn the programme selector to ⁠ Drum Clean / ล้างถังซัก.

2. Close the door.

3. Pull out the detergent drawer.

4. Pour approx. 1 litre of tap water into compartment II.

5. Add washing powder that contains a bleaching agent to compartment II.
   To prevent foaming, use only half of the amount of detergent recommended by the detergent manufacturer for light soiling. Do not use detergent suitable for woollens or delicates.

6. Push in the detergent drawer.

7. Press ⁠ Start / Reload / Pause to start the programme.

   • The display shows the remaining programme duration.
   • After the programme has ended, the display shows: End.

8. Start the first wash cycle or set the programme selector to Off / ปิด to switch off the appliance.

Display

The display shows the current settings, options or relevant information .

Example: Display

Buttons
The selection of programme settings depends on the programme that is set .

Programmes
Note: The laundry’s care labels provide you with additional information on pro-gram selection.

Accessories
Use original accessories. These have been made especially for your appliance.
Note: Some accessories are available in other colours.

Laundry

Preparing the laundry
ATTENTION! Objects remaining in the laundry may damage the laundry and the drum.

• Remove all items from any pockets in your laundry before using the appliance.

Note
The appliance and fabrics are protected when you prepare your laundry.

• Brush off sand and soil
• Sort the laundry according to col- our and textiles and observe the care labels
• Close all zips, Velcro fasteners, hooks and eyes
• Tie cloth belts, cloth straps and cords together
• Remove curtain fittings and lead strips
• Wash small or particularly delicate items in a mesh washing bag
• Wash large and small items of laundry together
• Wash laundry with fresh stains immediately
• Pretreat laundry with dried stains and wash several times
• Load the laundry unfolded into the drum

Detergents and care products
The manufacturer’s instructions for use and dosage can be found on the packaging.

Notes

• When using liquid detergents, only use liquid detergents that are self-flowing
• Do not mix different liquid detergents
• Do not mix detergent and fabric softener
• Do not use products that have expired or are highly congealed
• do not use products containing solvents, caustic agents or volatile substances
• Use dyes sparingly as salt may damage stainless steel
• Do not use color-bleaching agents in the appliance

Basic operation

Switching on the appliance

• Turn the programme selector to a programme.

Setting a programme

1. Turn the programme selector and set the required programme.
2. If required, adjust the programme settings.

Adjusting the programme settings
Requirement: A programme has been set.

• Adjust the programme settings.

Note: The programme settings are not saved permanently for the programme.

Loading laundry
Note: To prevent creasing, note the maximum load for the programmes.

Requirements

• The laundry is prepared and sorted.
• The drum is empty.
  1. Open the door.
  2. Place the laundry in the drum.
  3. Close the door.
     Ensure that there is no laundry trapped in the door.

Adding detergent and care product

Notes

• Do not use the measuring aid for liquid detergent for gel detergents, washing powder, or if Prewash or “Ready in” time are activated.
• Observe the information about detergents and care products
  1. Pull out the detergent drawer.
  2. Pour in detergent.
  3. If required, add the care product.
  4. Push in the detergent drawer.

Starting the programme
Requirement: A programme is set.

• Press ⁠ Start / Reload / Pause.
  • The drum rotates and load detection takes place. This can take up to 2 minutes, after which water enters the drum.
  • The display shows the programme duration or the programme end time.
  • After the programme has ended, the display shows: End.

Adding laundry
After the programme starts, you can remove or add laundry depending on the programme status.

1. Press ⁠ Start / Reload / Pause. The appliance pauses.
   Note: If you want to add laundry, follow the instructions on the dis- play.

2. Open the door.

3. Add or remove laundry.

4. Close the door.

5. Press ⁠ Start / Reload / Pause.

Cancelling the program

1. Press ⁠ Start / Reload / Pause.

2. Open the door.
   The appliance door remains locked for safety reasons if the temperature and water levels are high.

   • If the temperature is high, start the Rinse / ล้างน้ำ pro-gram.
   • If the water level is high, start the Spin / ปั่นหมาด programme or select a suitable programme for draining.

3. Remove the laundry.

Unloading the laundry

1. Open the door.
2. Remove the laundry from the drum.

Switching off the appliance

1. Turn the programme selector to Off / ปิด.
2. Turn off the tap.
3. Wipe the rubber gasket dry and remove any foreign objects.
4. Leave the appliance door and detergent drawer open so that residual water can evaporate.

Childproof lock
Secure your appliance against being operated unintentionally using the controls.

Activating the childproof lock

• Press and hold the two ****⁠ 3 sec. buttons for approx. 3 seconds.
  • The display shows ****.
  • The control elements are locked.
  • The childproof lock remains active even after the appliance has been switched off and in the event of a power cut.

Deactivating the childproof lock

• Requirement: To deactivate the childproof lock, the appliance must be switched on.
• Press and hold the two ****⁠ 3 sec. buttons for approx. 3 seconds.
• ****goes out in the display.

Basic settings

You can configure the basic settings for your appliance to meet your needs.

Overview of the basic settings

Changing the basic settings

1. Set the programme selector to position 1.
2. Press Spin Speed and, at the same time, turn the programme selector to position 2.
3. The display shows the current value.
4. Set the programme selector to the required position.
5. To change the value, press .
6. To save the changes, switch off the appliance.

Cleaning and servicing

To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.

Cleaning the drum
CAUTION-Risk of injury!
Permanently washing at low temperatures and a lack of ventilation for the appliance may damage the drum and cause injury.

• Regularly run a programme for cleaning the drum or wash at temperatures of at least 60 °C.
• Leave the appliance to dry after every operation with the door open, and leave the detergent drawer to dry.
• Run the ⁠ Drum Clean / ล้างถังซัก programme without laundry and with a cleaning agent to care for the inside of the appliance.

Cleaning the detergent drawer

1. Pull out the detergent drawer.
2. Press down on the insert and remove the detergent drawer.
3. Pull out the insert upwards.
4. Clean the detergent drawer and insert with water and a brush, and then dry them.
5. Fit the insert and click it into place.
6. Clean the opening for the detergent drawer.
7. Push in the detergent drawer.

Cleaning the drain pump
Clean the drain pump regularly, at least once a year, as well as in the event of faults, e.g. blockages or rattling noises.

Emptying the drain pump

1. Turn off the tap.

2. Switch off the appliance.

3. Disconnect the appliance’s mains plug from the power supply.

4. Open and remove the service flap.

5. Slide a sufficiently large container under the opening.

6. Take the drain hose out of the holder.

7. CAUTION – Risk of scalding!
   When you wash at high temperatures, the detergent solution gets hot.

   • Do not touch the hot detergent solution. To allow the detergent solution to flow out into the container, remove the sealing cap.

8. Firmly press on the sealing cap.

9. Insert the drain hose into the holder.

Cleaning the drain pump
Requirement: The drain pump is empty.

1. Since water may remain in the drain pump, unscrew the pump cap carefully.

   • The filter insert in the pump housing may become stuck due to coarse particles of dirt. Loosen the dirt and remove the filter insert.

2. Clean the interior, the thread on the pump cap and the pump housing.

3. Ensure that the impeller in the drain pump can rotate.

4. Insert the pump cap.

5. 1. Ensure that the parts of the pump cap are correctly assembled.

6. Screw the pump cap as far as it will go.
   The handle on the pump cap must be in a vertical position.

7. Insert and close the service flap.

Before the next wash
To prevent unused detergent from flowing straight into the outlet in the next wash, run a suitable programme for draining after you have emptied the drain pump.

1. Open the water tap.
2. Insert the mains plug.
3. Switch on the appliance.
4. Pour 1 litre of water into compart-ment II.
5. Select a suitable programme for draining.

Troubleshooting

You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.

WARNING-Risk of electric shock!
Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.
• Only use genuine spare parts when repairing the appliance.
• If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person in order to prevent any risk.

Emergency release
Releasing the door
Requirement: The drain pump is empty.

1. ATTENTION! Escaping water may cause material damage.
   • Do not open the door if you can see water through the glass. Pull the emergency release downwards with a tool and release.
   • The door lock is released.
2. Insert the maintenance flap and lock it into place.
3. Close the maintenance flap.

Transportation, storage and disposal

Removing the appliance

1. Turn off the tap.
2. Empty the water inlet hose.
3. Switch off the appliance.
4. Unplug the appliance’s mains plug.
5. Drain the water.
6. Detach the hoses.

Inserting the transit bolts
Secure the appliance before trans-portation using transit bolts in order to prevent transport damage.

1. Use a screwdriver to remove the 4 cover caps.
2. Insert the 4 transit bolts.

Disposing of old appliance
Valuable raw materials can be reused by recycling.

WARNING-Risk of harm to health!
Children can lock themselves in the appliance, thereby putting their lives at risk.

• Do not install the appliance behind a door as this may obstruct the appliance door or prevent it from opening.
• With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.

1. Unplug the appliance from the mains.
2. Cut through the power cord.
3. Dispose of the appliance in an environmentally friendly manner. Information about current disposal methods are available from your specialist dealer or local authority.

This appliance is labeled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Customer Service
Detailed information on the warranty period and terms of warranty in your country is available from our after-sales service, your retailer or on our website. If you contact Customer Service, you will require the product number (E-Nr.) and the production number (FD) of your appliance. The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.

Product number (E-Nr.) and production number (FD)
You can find the product number (E-Nr.) and the production number (FD) on the appliance’s rating plate. Depending on the model, the rating plate is located:

• On the inside of the door.
• On the inside of the maintenance flap.
• On the rear of the appliance.

Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly.

Consumption values

The indicated consumption values are approximate. The values may deviate from the indicated values depending on water pressure, water hardness, water inlet temperature, room temperature, type of laundry, amount and soiling of laundry, detergent used, fluctuations in the mains voltage and selected settings .

Technical data

Thank you for buying a Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from:

• Expert tips & tricks for your appliance
• Warranty extension options
• Discounts for accessories & spare parts
• Digital manual and all appliance data at hand
• Easy access to Bosch Home Appliances Service

Free and easy registration – also on mobile phones: www.bosch- home.com/welcome

Looking for help? You’ll find it here.
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.
BSH Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München, GERMANY
www.bosch-home.com
Register your new device on MyBosch now and get free benefits: bosch- home.com/welcome

References

• Home Appliances Global Website | Bosch
• Home Appliances Global Website | Bosch
• Bosch Service | Service worldwide
• Welcome to MyBosch

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>