QVC AutoBoost E314422 3 In 1 Jump Starter Power Bank User Guide

QVC Auto Boost E314422 3 In 1 Jump Starter Power Bank

CHARGING & RECHARGING

By using the Limitless Auto Boost™(“Auto Boost™”), you hereby agree that Limitless Innovations, Inc., an Illinois corporation and its affiliates (“Limitless”) shall have no liability for any losses associated with property damage, personal injury or loss of life that are incurred by you or by any third party in connection with or relating in any manner whatsoever to your use of the Auto Boost™. By using the Auto Boost™, you hereby agree at all times to comply fully with all safety warnings, operating instructions and general safety information in this user manual. By using the ™, you further agree to hold harmless Limitless, (and Limitless’ officers, directors, shareholders and employees) in connection with any losses sustained by you (including, without limitation, losses arising in whole or in part from property damage, personal injury or loss of life) relating in any manner whatsoever to your use of the Auto Boost™.

ETL
Auto Boost™ is ETL certified to conform to ANSI/CAN/UL STD. 2743 and tested to comply with FCC Standard Part 15 for safety and reliability under the United States and Canadian standards.

WHAT’S INCLUDED

• (1) Auto Boost™
• (1) Smart Jumper Cables
• (1) 12in Type-C to USB Charging Cable
• (1) Storage Bag with Printed Instructions
• (1) l0W Wall Adapter
• (1) 24in 3-ln-1 USB Charging Cable
• (1) 1-Port USB Car Charger

COMPONENTS

1. USB Charging Port (Output)
2. Flashlight
3. Type-C Port (Input)
4. Starter Port
5. Power Button
6. Digital Battery Level Indicator
7. Safety Check Lights

TECH SPECS

• Model : LIM-Bastable-MXXX
• Battery Capacity : 6,000mAh
• 4-Cell I 1,500mAh/14.8V Battery Type : Polymer Lithium High Ratio Recharging Time (From 0%): 4-5 Hours Life Cycle: Approx. 1,000 Times
• Type-C Port (Input ): 5V/2A
• USB Charging Port (Output) : 5V/2A
• Starter Port: 14.8V 200A (Start) – 400A (Peak)
• Supports Vehicles: 5.0L Gas, 8-Cylinder
• LED Flashlight: 25 Lumens
• Flashlight Modes: On I S.O.S. I Strobe
• Battery Working Temperature 140° F (-20° – 60° C)
• Product Working Temperature 32°-104° F (0°-40°C)
• Material: ABS
• Dimensions : 5.55in x 3.35in x 0.91in Weight: 10.40 oz. (0.65 lb.)

FLASHLIGHT

Flashlight Modes On I so’s. I Strobe I Off  Single click the Power Button to turn the Flashlight on.
Single click to scan through the modes, or press and hold the Power Button to turn off the Flashlight.

STORAGE

The ideal storage location for the Auto Boost™ is inside a cool, dry place. Batteries are affected by temperature. The ideal storage temperature is 70° F (21° C).

NOTE: If the Auto Boost™ is exposed to extreme temperatures
(14° F – 140° F / -20° C – 60° C), it is recommended to allow the Auto Boost™ to re-acclimate to the ideal temperature of 70° F before using.

USING THE POWER BANK

1. Plug the 24″ 3-ln-1 USB Charging Cable into the USB Charging Port.
2. Any compatible USB charging cable can be used with the Air Pro™.
3. Determine which connector is compatible with the device and plug it into the charging port.

Compatibility

• Micro  Select TracFone’s, Speakers, Cameras, Power Banks, & More
• Lightning Compatible with iPhones, Airproofs, & Most Apple Devices
• Type-C Compatible with newer devices by Samsung, Microsoft, Google, LG, Huawei, select Apple iPads (2018 and newer), select TracFone’s, and More.

CHARGING THE AUTOBOOST™

Checking the Battery Level

1. Press and hold the Power Button.
2. The current battery percentage will display on the Digital Battery Level Indicator.

Recharging the Auto Boost™

1. Plug the included 12in Type-C to USB Charging Cable into the USB Wall Adapter.
2. The Auto Boost™ will begin to charge.
3. The current battery level will blink on the Digital Battery Level Indicator until it reaches 100%.

NOTE: It is recommended to recharge the Auto Boost™ every three months or when the battery drops below 25%.

JUMP STARTING

Prep

Locate the vehicle’s battery.
Open the silicone cover on the Auto Boost™ and plug in the Smart Cables to the Jump Start Port.
The lights on the plug will flash red and green, indicating it is ready for Step 2.

Attach
Connect the RED Clamp to the positive terminal(+).
Connect the BLACK clamp to the negative terminal (-).
The light will change to a solid green, indicating it is ready for Step 3.

Start

• start the Vehicle.
• When done, remove the jumper cables in the reverse order that they were connected.

SAFETY CHECKS

The Smart Jumper Cables have 10 Safety Checks & Levels of Protection.

• Reverse Polarity
• Short Circuit
• Over-charge
• Over-Discharge
• Over-Temperature
• Timeout
• Vehicle Battery False Voltage Vehicle Engine
• Non-Sparking
• Low-Input Voltage

TROUBLESHOOTING

PROBLEM
The vehicle did not start.

SOLUTION
Disconnect the Smart Jumper Cables from the battery and from the Auto­ Boost™. Wait 60 seconds, then repeat Jump Starting steps 1-3. If the vehicle does not start after the third try, consult a certified mechanic.

PROBLEM
Safety Check Light is Red.

SOLUTION
Check the connection.
If the battery terminal is heavily corrod­ed, it may cause a bad connection. Refer to the vehicle’s owners manual on how to clean.
If the Red error message continues, one of the 10 Safety Checks listed to the left were found. See a certified mechanic.

L I M I T L = S S'”
All rights reserved. Limitless AirPro™, AirPro™, and Limitless™ are trademarks of Limitless Innovations, Inc. Design and specifications subject to change without notice. Products may vary from images shown. Accessories sold separately.
Limitlesslnnovations.comSupport@Limitlesslnnovations.com 855-843-4828 Limitless Innovations, Inc. 4800 Metalmaster IL 60050 © Limitless Innovations, Inc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>