KINO FLO PAN-AIR FreeStyle Air LED DMX System Instruction Manual

KINO FLO PAN-AIR FreeStyle Air LED DMX System Instruction Manual

FreeStyle Air LED DMX System

SYS-FAIR
FreeStyle Air LED DMX System, Univ

Each FreeStyle LED DMX System includes:

• 1 FreeStyle Air LED Panel (PAN-AIR)
• 1 Mounting Plate (MTP-BG41S)
• 1 FreeStyle 4/Extension, 25ft (X12-F425)
• 1 LED DMX Controller (LED-140X)
• 1 SnapBox w/ 2 x Diffusion (DFS-FA)

FreeStyle Air LED System Components

PAN-AIR FreeStyle Air Panel w/ Harness

MTP-BG41S KinoGrip 41K Mount w/ 5/8” Baby Receiver Short (16mm)

X12-F425 FreeStyle/4 Extension, 25ft

LED-140X-120U
FreeStyle 140 LED DMX Controller, Univ 120U

LED-140X-230U
FreeStyle 140 LED DMX Controller, Univ 230U

DFS-FA FreeStyle Air SnapBox w/ 2 x Diffusion

FreeStyle Air LED DMX Kit

FreeStyle Air LED DMX Kit w/ Soft Case

KIT-FAIR
FreeStyle Air LED DMX Kit w/ Soft Case, Univ

Kit Contents:

• 1 FreeStyle Air LED Panel (PAN-AIR)
• 1 MTP-BG41S Mount w/ Baby Receiver Short (16mm) (MTP-BG41S)
• 1 FreeStyle 4/Extension, 25ft (X12-F425)
• 1 FreeStyle 140 LED DMX Controller (LED-140X-120U/230U)
• 1 SnapBox w/ 2 x Diffusion (DFS-FA)
• 1 Soft Case (BAG-FA)

Dimensions:
42 x 7.5 x 15” (107 x 19 x 38cm)

Weight:
24 lb (11kg)

Power

AC Input
The FreeStyle 140 LED DMX Controller is powered AC and includes an IEC connection. It also includes a 12ft power cord with a locking IEC connector.

The FreeStyle 140 LED DMX has a built-in power supply with universal input from 100-240VAC.

Ambient Operating Temperature
The FreeStyle 140 LED DMX is designed to operate at temperatures from 14°F to 104°F (-10°C to 40°C).

DC Input
The FreeStyle 140 LED DMX can also be operated on 24VDC (input range 18-36VDC) through a 3-Pin XLR.

The pin polarity is:

• Pin # 1 – Ground
• Pin # 2 + 18-36VDC
• Pin # 3 not used

Note:
A low voltage warning will display if input DC voltage is under 18VDC.

Photo example: LOW VDC: 16

FreeStyle Harness

The harness connects directly to the controller. Connect the harness to the controller. Align the key ways on the harness connector with the oval Logo at the top with the circular receptacle on the ballast. Rotate the silver locking ring until it clicks into the lock position.

Extension Cable

X12-F425

The FreeStyle LED fixture can operate remotely from the controller with the extension cable up to 50ft (2 x 25ft). Remote operation of the controller provides more rigging options.

To connect Harness to Extension Cable, align oval Logos on the Harness and Extension. Rotate the silver locking ring until it clicks into the locked position.

Mounting Controller

The Controller can be mounted to a stand with a ballast mount accessory, MTP-BAL1 and mafer clamp.

MTP-BAL1

Mounting the Fixture

The standard mount (MTP-BG41S) comes with a 5/8” Baby Receiver Short Lollipop that clamps into a grip head. The ball and socket mount allows the fixture to be oriented in a broad range of angles.

Align the center pin of the mounting plate to the center hole on the mating plate.

Rotate plate clockwise until the four shoulder rivets drop into the receptacle. A locking pin will snap into place when the plate is properly seated.

The yellow wire loop provides attachment points for a safety chain.

To remove the plate, pull up on the locking pin and reverse the mounting procedure.

Turn the knob to loosen or tighten the mount.

Lollipops are interchangeable.

• MTP-L: Kino 41 Lollipop w/ 3/8” Pin (10mm)
• MTP-LBC: Kino 41 Lollipop w/ Baby Rcvr Curve (16mm)
• MTP-LBS: Kino 41 Lollipop w/ Baby Rcvr Short (16mm)

Snap Box & Snap Grid

The SnapBox accessory is a lightweight fabric tailor-made for the

FreeStyle Air. It is attached with velcro straps. The removable grid cloth attaches to the SnapBox with Velcro.

DFS-FA FreeStyle Air SnapBox w/ 2 x Diffusion

The SnapGrid accessory is constructed of pre-stretched fireproof fabric with a built-in stainless steel frame. It unfolds and snaps into place.

This model requires the use with the corresponding SnapBox; it is not designed to be used by itself.

LVR-FA40 FreeStyle Air SnapGrid, 40°

Control Panel – White Mode

A) On /Off: On = Green light displayed. Off = Red light displayed. The display and all menu settings can be operated while the power button is in the Off position, as long as power is applied to the controller. The On /Off button only controls the light source.

B) Menu: Provides access to menu options such as General settings, Reset, DMX, DMX Wireless, Camera LUT and Color Space. Shortcut: While on control screen, press and hold for 3 seconds to switch through menus (White, Gels & Hue, RGB, CIE xy and FX).

C) Preset Buttons: Factory defaults left to right are: 2700K, 3200K, 5000K and 6500K. G/M default value is 000. User can also use these preset buttons to store custom Kelvin and G/M settings.

D) Display: Provides access to Dim, Kelvin, G/M, and DMX channel. Factory reset will show: Dim = 10%, Kelvin = 2700K, G/M = 000, DMX = 001.

E) Lock: Press the Lock button to disable all buttons and Control knob. Press for 3 seconds to restore displayed presets to default factory settings.

F) Mode: Press to navigate from Dim to Kelvin and G/M settings. When in sub-menus, pressing Mode always returns you to main display. When DMX is applied, use Mode to access DMX channel on main display. Shortcut: Long press will bring you back one step.

G) Data Port: Mini B USB for firmware updates.

H) Control Knob: Manually adjusts Dim, Kelvin, G/M levels and DMX address. Press the Control knob to toggle between Fine and Coarse increments or when selecting options within menus.

DMX Note: The LED-140X has an “AUTO TERMINATE” feature. The last fixture that does not have an XLR cable attached to the DMX “Out” port will automatically terminate.

Control Panel – Gels/Hue Mode

Gels/Hue Mode

A) Menu:
Provides access to menu options such as General settings (Gels/Hue Mode), Reset, DMX, DMX Wireless, Camera LUT and Color Space. Shortcut: While on control screen, press and hold for 3 seconds to switch through menus (White, Gels & Hue, RGB, CIE xy and FX).

B) Preset Buttons:
Factory defaults left to right are: 2700K, 3200K, 5000K and 6500K. G/M default value is 000. User can also use these preset buttons to store custom Kelvin between 2500K and 9900K and custom G/M, Gel, Hue and Saturation settings.

C) Display:
Provides access to Dim, Kelvin, G/M, Gel, Hue/Saturation and DMX channel. Factory reset will show: Dim = 10%, Kelvin = 2700K, G/M = 000, DMX = 001.

D) Mode:
Press to navigate from Dim to Kelvin, G/M, Gel, Hue and Saturation settings. When on the Gel function, pushing the Control knob in/out will apply the gel or remove the gel. When in sub-menus, pressing Mode always returns you to main display. When DMX is applied, use Mode to access DMX channel on main display. Shortcut Tip: Long press will bring you back one step.

Control Panel – RGB Mode

RGB Mode

A) Menu:
Provides access to menu options such as General settings (RGB Mode), Reset, DMX, DMX Wireless, Camera LUT and Color Space. Shortcut: While on control screen, press and hold for 3 seconds to switch through menus (White, Gels & Hue, RGB, CIE xy and FX).

B) Preset Buttons:
Factory defaults left to right are: 2700K, 3200K, 5000K and 6500K. G/M default value is 000. User can also use these preset buttons to store custom Kelvin between 2500K and 9900K and custom G/M, and RGB settings.

C) Display:
Provides access to Dim, Kelvin, G/M, RGB and DMX channel. Factory reset will show: Dim = 10%, Kelvin = 2700K, G/M = 000, DMX = 001.

D) Mode:
Press to navigate from Dim to Kelvin, G/M, RGB settings. When in sub-menus, pressing Mode always returns you to main display. When DMX is applied, use Mode to access DMX channel on main display. Shortcut: Long press will bring you back one step.

Control Panel – CIE xy

CIE xy Mode

A) Menu:
Provides access to menu options such as General settings (CIE xy mode), Reset, DMX, DMX Wireless, Camera LUT and Color Space. Shortcut: While on control screen, press and hold or 3 seconds to switch through menus (White, Gels & Hue, RGB, CIE xy and FX).

B) Preset Buttons:
Factory defaults left to right are: 2700K, 3200K, 5000K and 6500K. User can also use these preset buttons to store custom xy settings.

C) Display:
Provides access to Dim, CIE xy coordinates and DMX Channel. Factory reset will show: Dim = 10%, x = 0.460 , y = 0.411, G/M = 000, DMX = 001.

D) Mode:
Press to navigate from Dim to xy settings. When in sub-menus, pressing Mode always returns you to main display. When DMX is applied, use Mode to access DMX channel on main display. Shortcut: Long press will bring you back one step.

Control Panel – FX (Effects)

FX (Effects) Mode

FX mode provides access to effects including Candle, Fire, TV, Police, Lightning,
Paparazzi, Pulse and Scroll. Candle mode used as an example:

A) FX Option:
Choose the desired FX Mode by rotating the control knob. When on the desired effect, there will be several pre-programmed effects as well as control parameters that can be altered.

B) Preset Buttons:
In FX Mode, Kelvin custom settings and any control functions displayed such as Rate and Amplitude (Ampl) can be saved as a preset. Chosen values can be assigned to any preset button by holding down the desired button for 3 seconds. The Kelvin display will flash once the setting is registered.

To restore presets to default factory settings, choose Reset under General settings and Clear Presets. This method will reset all buttons in all Modes. Shortcut: If only want to clear presets for Candle Mode, hold Lock button for 3 seconds while Candle mode is displayed.

C) Mode:
Press to navigate from Dim to Kelvin and FX settings. Shortcut: Long press will bring you back one step.

Camera LUT

The Camera LUT (Look-up Tables) feature harmonizes the Kino Flo light sources to the camera. Depending on the camera and the Kelvin setting, some differences are very subtle, while others can be more dramatic.

The corrections are applied as a CIE xy correction at each CCT (Kelvin) setting.
The default setting is targeting the CIE xyz response (human eye).

Press the green menu button to the left of the display screen and scroll down to Camera LUT, then press the control knob. Menu with camera selection will be displayed. Turn the control knob and press to select camera setting:

• C1 Arri Alexa
• C2 Sony Venice
• C3 Panavision DXL
• C4 Panasonic Varicam

The camera code (C1 for Arri Alexa), for example, will appear on the main menu between DIM and CCT to designate that a camera setting is active.

Note: When the controller is reset, the camera settings will go to Kino Flo Default mode.

Color Space

Color Space defines the RGB color space used and only affects color – not Kelvin. It is used in RGB mode and Hue Angle and Saturation. There are a few instances in the FX (Effects) mode that are also affected when color is used. The RGB color space defines the value of Red, Green, and Blue primaries (in CIE xy) and the white point is fixed at 6500 Kelvin.

Press the green menu button to the left of the display screen and scroll down to Color Space, then press the control knob. Menu with color selection will be displayed. Turn the control knob and press to select Color Space options:

• rec 709 / sRGB
• P3 D65
• rec 2020

The color space rec 709 / sRGB is commonly used on computer monitors, SDTV and HDTV television. There are slight gamma variations between rec 709 / sRGB, but not enough to separate into 2 color spaces.

The color space P3 D65 is a common color space for digital movie projection.
The color space rec 2020 is used in ultra high definition television (UHDTV).

The color space is used when the controller is set to the RGB mode and when set to the Hue Angle/ Saturation mode.

In RGB mode – the color space designation will be displayed at the top of the menu. When changing the Red, Blue or Green values, the Kelvin will be locked in at 6500 for all color spaces. When the Kelvin is locked in, CCT will be displayed as CCT*. When using Green/Magenta the CCT value is unlocked and color space selection has no impact.

In Hue Angle/Saturation mode – the color space designation will be displayed on the Gel line and GEL will be displayed as GEL and CCT will be displayed as CCT. The Color space will be displayed only when Hue Angle and Saturation are being used. When using Green/Magenta or Gel, the CCT will be unlocked and color space selection has no impact.

Accessories

LVR-FA40 FreeStyle Air SnapGrid, 40° (Use w/ DFS-FA)

MTP-BG41 KinoGrip 41K Mount w/ Baby Receiver (16mm)

MTP-KG41 KinoGrip 41K Mount w/ 3/8” Pin Lollipop (10mm)

MTP-BW41 Kino 41K Mount Wing w/ Baby Receiver (16mm)

MTP-BW41S Kino 41K Mount Wing w/ Baby Receiver Short (16mm)

MTP-KW41 Kino 41K Mount Wing w/ 3/8” Pin (10mm)

MTP-BAL1 Kino Bal/LED Controller Mount (16mm)

• MTP-L Kino 41 Lollipop w/ 3/8” Pin (10mm)
• MTP-LBC Kino 41 Lollipop w/ Baby Rcvr Curve (16mm)
• MTP-LBS Kino 41 Lollipop w/ Baby Rcvr Short (16mm)
  

XLR-310 3-Pin Xlr DC Power Cable, 10ft

STD-D1 Reverse Stand

STD-M30 Medium Duty, 3-Rise 30”
STD-M36 Medium Duty, 3-Rise 36”

Fixture Specifications

FreeStyle Air

• PAN-AIR: FreeStyle Air Panel w/ Harness
• Weight: 5 lb (2kg)
• Dimensions: 39.5 x 2 x 13” (100 x 5 x 33cm)

LED Controller Specifications

FreeStyle 140 LED DMX Controller

• LED-140X FreeStyle 140 LED DMX Controller
• AC Input Voltage: 100~240VAC 50/60Hz, 150W
• Amperage VAC: 1.25A at 120VAC, 0.65A at 230VAC
• DC Input Voltage: 18~36VDC, 150W
• Amperage VDC: 6.25A at 24VDC
• Kelvin Range: 2500K~9900K
• Dimming Range: 100%~1%
• Weight: 4.5 lb (2kg)
• Dimensions: 9.5 x 7.5 x 2.5” (24 x 19 x 6cm)

FCC Part 15 Verification:
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.

FCC Part 15 Declaration of Conformity:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

KINO FLO, INC
FreeStyle Air & LED-140X
ID: XRSCRMXTIMO101
IC: 8879A-CRMXT101

The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. The luminaire is intended for professional use only

For latest Warranty information and Certifications, see Kino Flo website at www.kinoflo.com.

Environmental: Disposal of Old Electrical & Electronic Equipment. 

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. This product is made of recyclable materials and should be disposed of in accordance with governmental regulations.

Kino Flo, Inc. 2840 N. Hollywood Way, Burbank, CA 91505, USA
Tel: 818 767-6528 website: www.kinoflo.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>