ABB MO132-2.5 Manual Motor Starter Magnetic Only User Manual

ABB MO132-2.5 Manual Motor Starter Magnetic Only

Product Details

Product Name: MO132-2.5 Manual Motor Starter Magnetic Only 2.5 A
Product ID: MO132-2.5
Extended Product Type: 1SAM360000R1007
EAN: 4013614400223
Catalog Description: MO132-2.5 Manual Motor Starter Magnetic Only 2.5 A

General Information

The MO132-2.5 manual motor starter magnetic only is a compact 45 mm width device with a rated operational current of 2.50 A. This device is used to manually switch on and off loads/motors and to protect them reliably and without the need for a fuse from short-circuits. The manual motor starter offers a rated service short-circuit breaking capacity of 100 kA at 400 V AC. It features a built-in disconnect function, trip-free mechanism, and a rotary handle with a clear switch position indication. The manual motor starter magnetic only is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, and power in-feed blocks are available as accessories.

Technical Specifications

• Rated Service Short-Circuit Breaking Capacity (Ics): 100 kA at 400 V AC
• Rated Ultimate Short-Circuit Breaking Capacity  (Icu): 100 kA
• Rated Instantaneous Short-Circuit Current Setting (Ii): Not specified
• Setting Range: Not specified
• Rated Operational Power AC-3 (Pe): 0.75 kW at 400 V Three Phase
• Rated Operational Voltage: 690 V AC
• Rated Operational Current (Ie): 2.5 A
• Rated Frequency (f): 50 Hz
• Rated Impulse Withstand Voltage (Uimp): 6 kV
• Rated Insulation Voltage (Ui): 690 V
• Power Loss: 1.7 W
• Number of Poles: 3
• Conventional Free-air Thermal Current (Ith): 2.5 A

Product Usage Instructions

1. Ensure that the power supply to the motor or load is switched off.
2. Connect the main circuit wires to the appropriate terminals on the manual motor starter.
3. If necessary, connect auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, or other accessories as required.
4. Mount the manual motor starter on a DIN rail in a suitable position.
5. Tighten the mounting screws securely using the recommended screwdriver and torque.
6. Verify that the rotary handle is in the “OFF” position.
7. Switch on the power supply to the motor or load.
8. To start the motor or activate the load, turn the rotary handle to the “ON” position.
9. To stop the motor or deactivate the load, turn the rotary handle back to the “OFF” position.
10. If necessary, lock the handle to prevent unauthorized changes.

General Information

• Extended Product Type MO132-2.5
• Product ID 1SAM360000R1007
• EAN 4013614400223
• Catalog Description MO132-2.5 Manual Motor Starter Magnetic Only 2.5 A
• Long Description The MO132-2.5 manual motor starter magnetic only is a compact 45 mm width device with a rated operational current of Ie = 2.50 A. This device is used to manually switch on and off loads/motors and to protect them reliably and without the need for a fuse from short-circuits. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 100 kA at 400 V AC. A combination together with overload relays or motor controllers allows the protection of motors. Further features are the built-in disconnect function, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter magnetic only is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks are available as accessory.

Ordering

• Minimum Order Quantity 1 piece
• Customs Tariff Number 85362010

Popular Downloads

• Data Sheet, Technical Information 2CDC131035D0202
• Instructions and Manuals 2CDC131034M6801
• Instructions and Manuals (Part 2) 2CDC131060M0202
• Time-Current Characteristic Curve 1SAM300515F0005
• I²t Characteristic
  • 1SAM300507F0001
  • 1SAM300507F0003
• Cut-off Current Characteristic
  • 1SAM300508F0001
  • 1SAM300508F0003
• CAD Dimensional Drawing 2CDC001079B0201
• Dimension Diagram 1SAM300402F0001

Dimensions

• Product Net Width 45 mm
• Product Net Height 90 mm
• Product Net Depth /Length 86.75 mm
• Product Net Weight 0.265 kg

Technical

• Rated Service Short- Circuit Breaking Capacity (Ics)
  • (230 V AC) 100 kA
  • (400 V AC) 100 kA
  • (440 V AC) 100 kA
  • (500 V AC) 100 kA
  • (690 V AC) 100 kA
• Rated Ultimate Short- Circuit Breaking Capacity (Icu)
  • (230 V AC) 100 kA
  • (400 V AC) 100 kA
  • (440 V AC) 100 kA
  • (500 V AC) 100 kA
  • (690 V AC) 100 kA
• Rated Instantaneous  Short-Circuit Current Setting (Ii) 31.3 A
• Setting Range None
• Rated Operational Power AC-3 (Pe) (400 V) Three Phase 0.75 kW
• Rated Operational Power AC-3e (Pe) (400 V) Three Phase 0.75 kW
• Rated Operational Main Circuit Voltage 690 V AC
• Rated Operational Current (Ie) 2.5 A
• Rated Operational Current AC-3 (Ie) 2.5 A
• Rated Operational Current AC-3e (Ie) 2.5 A
• Rated Frequency (f)
  • Main Circuit 50 Hz
  • Main Circuit 60 Hz
• Rated Impulse Main Circuit 6 kV Withstand Voltage (Uimp )
• Rated Insulation Voltage 690 V (Ui)
• Power Loss at Rated Operating Conditions per Pole 1.7 W
• Number of Poles 3
• Conventional Free-air Main Circuit 2.5 A Thermal Current (Ith)
• Degree of Protection Housing IP20 Main Circuit Terminals IP10
• Pollution Degree 3
• Electrical Durability 50000 cycle
• Mechanical Durability 100000 cycle
• Terminal Type Screw Terminals
• Flexible with Ferrule 1/2x 0.75 … 2.5 mm²
• Flexible with Insulated Ferrule 1/2x 0.75 … 2.5 mm²
• Flexible 1/2x 0.75 … 2.5 mm²
• Rigid 1/2x 1 … 4 mm²
• Connecting Capacity Main Circuit
• Tightening Torque Main Circuit 0.8 … 1.2 N·m
• Wire Stripping Length Main Circuit 9 mm
• Recommended Screw Driver Pozidriv 2
• Mounting Position 1 … 6
  • TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  • TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting on DIN Rail
  • Minimum Mounting DistanceElectrical Conductive Board, Horizontal – Up to 400 V 0 mm
  • Electrical Conductive Board, Horizontal – Up to 690 V 1.5 mm
  • Electrical Conductive Board, Vertical 75 mm
  • Other Device Same Type, Horizontal 0 mm
  • Other Device Same Type, Vertical 150 mm
• Actuator Type Rotary Handle
• Contact Position Indication ON / OFF / TRIP
• Standards
  • IEC/EN 60947-1
  • IEC/EN 60947-2
  • IEC/EN 60947-4-1
  • UL 60947-1
  • UL 60947-4-1
• Remarks
  • For overload protection of the motors, an appropriate thermal or electronic overload relays must be used

Technical UL/CSA

• Short-Circuit Current Rating (SCCR)
  • Any UL Listed Fuses or Circuit-Breakers, Group Installations (480 V AC) 65 kA
  • Any UL Listed Fuses or Circuit-Breakers, Group Installations (600 V AC) 47 kA
  • Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (480 V AC) 65 kA
  • Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (600 V AC) 47 kA
  • Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (480Y / 277 V AC) 65 kA
  • Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (600Y / 347 V AC) 47 kA
• Maximum Operating Voltage UL/CSA Main Circuit 600 V AC
• Horsepower Rating UL/CSA
  • (200 V AC) Three Phase 0.5 Hp
  • (208 V AC) Three Phase 0.5 Hp
  • (220 … 240 V AC) Three Phase 0.5 Hp
  • (440 … 480 V AC) Three Phase 1 Hp
  • (550 … 600 V AC) Three Phase 1.5 Hp
• Full Load Amps Motor Use
  • (200 V AC) Three Phase 2.5 A
  • (208 V AC) Three Phase 2.5 A
  • (220 … 240 V AC) Three Phase 2.5 A
  • (440 … 480 V AC) Three Phase 2.5 A
  • (550 … 600 V AC) Three Phase 2.5 A
• Locked Rotor Amps
  • (200 V AC) Three Phase 15 A
  • (208 V AC) Three Phase 15 A
  • (220 … 240 V AC) Three Phase 15 A
  • (440 … 480 V AC) Three Phase 15 A
  • (550 … 600 V AC) Three Phase 15 A
• General Use Rating (600 V AC) 2.5 A UL/CSA
• Connecting Capacity Flexible 1/2x 16-12 AWG
• Main Circuit UL/CSA Stranded 1/2x 16-12 AWG
• Tightening Torque Main Circuit 10 in·lb UL/CSA

Environmental

• Ambient Air Temperature
  • Around the Enclosure 0 … +40 °C
  • Operation -25 … +60 °C
  • Storage -50 … +80 °C
• Ambient Temperature Compensation Air No
• Maximum Operating Altitude Permissible 2000 m
• Resistance to Shock acc. to IEC 60068-2-27 11 ms Pulse 25g
• Resistance to Vibrations 5g / acc. to IEC 60068-2-6 3 … 150 Hz
• RoHS Status Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019

Certificates and Declarations

• ABS Certificate 1SAA963001-0101
• BV Certificate 1SAA963001-0202
• CB Certificate 1SAA963002-2002
• CQC Certificate CQC2010010307387700
• Cut-off Current Characteristic
  • 1SAM300508F0001
  • 1SAM300508F0003
• Declaration of 2020980307003526 Conformity – CCC
• Declaration of 1SAD101100-3403 Conformity – CE
• Declaration of 1SAD201100-3403 Conformity – UKCA
• DNV GL Certificate 1SAA963001-0304
• EAC Certificate 1SAA963000-2701
  • 1SAM300507F0001
  • 1SAM300507F0003
• I²t Characteristic
• KC Certificate 1SAA963002-1502
• LR Certificate 1SAA963001-0502
• RINA Certificate 1SAA963002-0802
• RMRS Certificate 1SAA918000-0704
• UL Certificate
  • E137861-20090225
  • E345003-20090225

Container Information

• Package Level 1 Units box 1 piece
• Package Level 1 Width 92 mm
• Package Level 1 Depth / 95 mm Length
• Package Level 1 Height 50 mm
• Package Level 1 Gross 0.28 kg Weight
• Package Level 1 EAN 4013614400223
• Package Level 2 Units carton 40 piece
• Package Level 2 Width 280 mm
• Package Level 2 Depth / Length 395 mm
• Package Level 2 Height 210 mm
• Package Level 2 Gross Weight 11.586 kg
• Package Level 2 EAN 4013614443671

Classifications

• Object Classification F Code
• ETIM 4 EC000074 – Motor protective circuit-breaker
• ETIM 5 EC000074 – Motor protective circuit-breaker
• ETIM 6 EC000074 – Motor protection circuit-breaker
• ETIM 7 EC000074 – Motor protection circuit-breaker
• ETIM 8 EC000074 – Motor protection circuit-breaker
• eClass V11.0 : 27370401 UNSPSC 39121521
• IDEA Granular Category 4731 >> Manual Starters Code (IGCC)
• E-Number (Finland) 3705885
• E-Number (Sweden) 3110035

Accessories

Categories

• Low Voltage Products and Systems → Circuit Breakers → Manual Motor Starters
• Low Voltage Products and Systems → Control Products → Manual Motor Starters → Manual Motor Starters

© 2023 ABB. All rights reserved.
Subject to change without notice

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>