King Innovation 63415 Direct Bury Twist On with Strain Relief User Guide
- June 13, 2024
- KING INNOVATION
Table of Contents
Direct Bury Twist-On with Strain Relief
Installation Instructions
IMPORTANT: Turn off power before installing or removing connector. Product to be used in accordance with local and national codes.
- Strip wires 5/8″ (15.9 mm).
- Align any frayed strands or conductors.
- Place stripped wires together with ends of insulation even.
- Push conductors firmly into connector and twist onto wire until tight. Wipe sealant in and around conductors and connector opening while tightening. Do not over torque.
- Position conductors as shown in Figure A and close lid. Note: When installing 2 – #18 conductors, position to exit out same side. See Figure B.
- Do not reuse.
Figure A Figure B
DryConn® DBSR® Black Medium
| Catalog # | Selling Unit |
|---|---|
| 63415 | Canister of 15 |
| 63475 | Box of 100 |
PRODUCT SPECIFICATIONS & MEASUREMENTS
-
Integrated twist-on connector.
No additional wire connector needed. -
Strain Relief Lid
Max. Voltage: 600V
Connector Size: 1.75″ x 2.28″
Wire Type: Copper/Copper
Wire Range: Min #22/Max #6
Sealant Temp Rating: -45°F to 400°F
UL Designation: MSR
Measurements (Inches):
A – 2.28 B – 1.05
C – 1.75 D – 0.70
- UL486G Listed as a sealed wire connector system. For use in damp, wet, raintight, direct bury and submersible locations. Not to be used in continuous submersion applications.
Selected 600V Wire Combinations
| 2 #18 | 1 – 3 #10 | 1 #14 w/3 – 4 #18 |
|---|---|---|
| 1 – 4 #12 | 2 #14 w/2 – 4 #16 | 1 #12 w/2 – 4 #18 |
| 3 #14 w/1 – 2 #16, #18, #20 or #22 | 1 #8 w/1 – 2 #16, #18, #20 or #22 | 2 #12 |
w/1 – 2 #14, #16 or #18
4 – 6 #16| 5 #14 w/1 #18| 2 – 5 #14
1 #8 w/1 #12| 1 #12 w/1 – 4 #14 or #16| 3 #10 w/1 #18
1 #10 w/1 – 5 #16| 3 #12 w/1 #14| 1 #10 w/1 – 3 #14
Contact factory for a complete list of wire combinations at 800.633.0232.
U.S. Pat. 7,170,005, 6,815,616, 7,122,742 and Additional Patents Pending
apply.
All other trademarks, U.S. & Foreign Patents Pending apply. All Rights
Reserved.
50100-52 REV H 08/23
MADE IN U.S.A.
www.kinginnovation.com
(P) 800.624.4320
(F) 636.519.5410