PROVISION-ISR I2-340IPSN-28-V2 S Sight Outdoor IP Camera User Guide
- June 13, 2024
- PROVISION-ISR
Table of Contents
PROVISION-ISR I2-340IPSN-28-V2 S Sight Outdoor IP Camera
Product Information
The NDAA S-SIGHT is a camera series provided by Provision-ISR. The S-SIGHT cameras offer superior image quality, improved night performance, and excellent value-for-money. The specific model, I2-340IPSN-28-V2, is a 4MP bullet camera with a fixed lens and 20m infrared (IR) range. It is suitable for both indoor and outdoor surveillance applications.
Main Features:
- Analytics
- Image Sensor
- Effective Pixels
- Electronic Shutter
- Frame Rate
- Day & Night
- Min. Illumination
- Audio Compression
- Communication
- Image Settings
- Image Enhancement
- Noise Reduction
- Image Orientation
- Privacy Zone
- Motion Detection
- Video Compression
- Resolution
- Multi-Stream
- Bit rate
- Encode Mode
- Image Quality
- IR Distance
- Lens (Field of View)
- Iris Lens Mount
- Protection Rate
- Bracket Dimensions
- Weight (gross)
- Network
- Power
- Analog Video Output
- Audio Connectivity
- SD Card
- Hard Reset Button
- Alarm
- Remote Monitoring
- User Access
- Network Protocol
- ONVIF Ethernet PoE Power Supply
- Work Environment
- Junction Box
Product Usage Instructions
To install and use the I2-340IPSN-28-V2 camera, follow these steps:
- Choose a suitable location for surveillance, considering both indoor and outdoor scenarios.
- Mount the camera securely using the included bracket and ensure it is protected with the appropriate protection rate.
- Connect the camera to the network using an Ethernet cable or PoE (Power over Ethernet) power supply.
- Configure the camera’s settings according to your preferences using the provided communication options.
- Adjust the image settings such as exposure mode, sharpness, saturation, brightness, contrast, and image orientation to optimize image quality.
- Enable features like True WDR (120dB), BLC (Backlight Compensation), HLC (Highlight Compensation), ROI (Region of Interest), and 3D-DNR (Digital Noise Reduction) for enhanced image performance.
- Set up privacy zones to protect sensitive areas from being captured by the camera.
- Configure motion detection settings to receive alerts when motion is detected in the camera’s field of view.
- Choose the desired video compression and resolution settings based on your requirements.
- Set up audio connectivity if needed, and adjust audio compression settings accordingly.
- If desired, insert an SD card for local video storage.
- Use the hard reset button to restore the camera to its factory default settings if necessary.
- Configure alarm settings for additional security measures.
- Enable remote monitoring to access the camera’s live feed and recordings from a remote location.
- Set up user access permissions to control who can view and manage the camera’s settings.
- Ensure the camera is compatible with the desired network protocol, such as ONVIF.
- Provide a stable power supply to the camera using the appropriate power source.
- Consider the recommended work environment conditions for optimal camera performance.
- If using a junction box, ensure it is compatible and properly installed for cable management and protection.
I2-340IPSN-28-V2
20M IR 4MP FIXED LENS BULLET CAMERA
Equipped with a 2.8mm fixed lens, this 4MP bullet camera is designed for
short-distance surveillance (up to 20m) in indoor and outdoor scenarios. With
its excellent performance, reliability, and affordable price, the
I2-340IPSN-28-V2 camera is the perfect solution for any basic installation.
MAIN FEATURES
- 4MP
- S-SIGHT
- 2592×1520 Resolution
- Wide field of view 110°
- 3D-DNR
- IP67
ANALYTICS
- General Analytics: Camera Tampering
- Standard Analytics: Line Crossing, Sterile Area
SPECIFICATIONS
- Image Sensor 1/2.7” CMOS (16:9)
- Effective Pixels 2560×1440
- Electronic Shutter 1/25s ~ 1/100000s
- Frame Rate 1-25/30FPS
- Day & Night ICR
- Min. Illumination Day: 0.1lux / Night: 0.04lux (@F2.2, AGC on) 0lux with IR on
- Audio compression N/A
- Communication N/A
- Image Settings AWB, AGC Adjustable, Exposure Mode (Auto)
- Sharpness, Saturation, Brightness & Contrast Adjustable
- Image Enhancement True WDR (120dB), BLC, HLC, ROI
- Noise Reduction 3D-DNR
- Image Orientation Mirror/Flip
- Privacy Zone Yes
- Motion Detection Yes
- Analytics General Analytics: Camera Tampering
- Standard Analytics: Line Crossing, Sterile Area
- Video Compression H.265 / H.264 / MJPEG (Substream only)
- Resolution 4MP (2560×1440) / 3MP (2304×1296) / 2MP (1920×1080) / D1 / QVGA /CIF
- Multi-Stream
- Master Stream: 4MP (2560×1440) / 3MP (2304×1296) / 2MP (1~30fps)
- Substream: 1MP (1~12/15fps) /QVGA/D1/CIF (1~30fps)
- Third Stream: QVGA/D1/CIF (1~30fps)
- Bit rate 64Kbps ~ 5Mbps@H.265 / 64Kbps ~ 5Mbps@H.264
- Encode Mode VBR/CBR
- Image Quality Five levels under VBR; Free adjustment under CBR
- IR Distance 20m (1 High-Power IR LED)
- Lens (Field of View) 2.8mm (110°)
Lens Mount | M12 mount |
---|---|
Protection Rate | Water Proof: IP67 |
Bracket | 3-Axis Bracket |
Dimensions | 172.2×73.4×74.5mm |
Weight (gross) | ~390g |
Network | RJ45 (+PoE) |
Power | DC Socket |
Analog Video Output | No |
Audio Connectivity | No |
SD Card | Event/Schedule based Main/Substream recording (Up to 128Gb) |
Hard Reset Button | Yes |
Alarm | No |
Remote Monitoring | IE Browsing, VMS Software, Provision Cam2 Mobile App |
User Access | Supports simultaneous monitoring of up to 4 users with multi- |
stream real-time
transmission
Network Protocol| IPv4, IPv6, TCP, UDP, DHCP, NTP, DDNS, 802.1X, RTSP,
Multicast, UPnP, Email, FTP, HTTPS, QoS
ONVIF| Yes
Ethernet| 100Mbps
PoE| Yes
Power Supply| DC12V/~420mA / PoE/~5.4W
Work Environment| -30°C~60°C, 10%~90% Humidity
Junction Box| PR-JB12IP66 – PR-JB12IP64
DIMENSIONS
ACCESSORIES
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>