BOSCH F 016 L94 518 Universal Chain User Manual
- June 13, 2024
- Bosch
Table of Contents
BOSCH F 016 L94 518 Universal Chain
Product Information
- Product Name: UniversalChain
- Model Numbers: 35, 40
- Manufacturer: Robert Bosch Power Tools GmbH
- Address: 70538 Stuttgart, GERMANY
- Website: www.bosch-pt.com
- Article Number: F 016 L94 518
- Date of Manual/Instructions: 30.05.2023
Product Usage Instructions
- Ensure you have read and understood the user manual before using the UniversalChain.
- Before starting the chainsaw, inspect the chainsaw for any signs of damage or wear. Do not use if there are any visible defects.
- Make sure the chainsaw is properly lubricated. Check the oil level and refill if necessary.
- Wear appropriate personal protective equipment, including safety glasses, gloves, and ear protection.
- Hold the chainsaw firmly with both hands, ensuring a secure grip.
- Position the chainsaw on the material to be cut, making sure the chain is not in contact with anything.
- Start the chainsaw according to the instructions provided in the user manual.
- Apply light pressure to the chainsaw and let the chain do the cutting. Do not force the chainsaw through the material.
- After use, switch off the chainsaw and wait for the chain to stop moving before setting it down.
- Clean and maintain the chainsaw regularly to ensure optimal performance and longevity.
Note: These are general usage instructions. For detailed operating procedures and safety guidelines, please refer to the user manual provided with the product.
EU Declaration of Conformity
Chain saw Article number
We declare under our sole responsibility that the stated products comply with
all applicable provisions of the directives and regulations listed below and
are in conformity with the following standards.
UniversalChain 35
UniversalChain 40
3 600 HB8 300
3 600 HB8 330
3 600 HB8 400
3 600 HB8 430
2006/42/EC
2014/30/EU
2011/65/EU
2000/14/EC
EN 62841-1:2015
EN 62841-4-1:2020
EN 55014-1:2017+A11:2020
EN 55014-2:2015
EN IEC 61000-3-2:2019
2000/14/EC: Measured sound power level 104 dB(A), guaranteed sound power level
106 dB(A)
Conformity assessment procedure in accordance with annex V. Product category:
6 2006/42/EC: EU type examination no. 4811001.21007 by notified body no. 0158
Notified body: DEKRA Testing and Certification GmbH, Dinnendahlstraße 9, 44809
Bochum, Germany.
Technical file at: *
Robert Bosch Power Tools GmbH,
PT/ECS, 70538 Stuttgart, GERMANY
Henk Becker
Chairman of Executive
Management
Helmut Heinzelmann
Head of Product Certification
Robert Bosch Power Tools GmbH, 70538 Stuttgart, GERMANY
Stuttgart, 30.05.2023
Declaration of Conformity
Chain saw
UniversalChain 35
Article number
3 600 HB8 370
We declare under our sole responsibility that the stated products comply with
all applicable provisions of the regulations listed
below and are in conformity with the following standards.
Technical file at: Robert Bosch Ltd. (PT/SOP-GB), Broadwater Park, North
Orbital Road, Uxbridge UB9 5HJ, United Kingdom
The Supply of Machinery (Safety) Regulations 2008
The Electromagnetic Compatibility Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment
Regulations 2012
The Noise Emission in the Environment by Equipment for use Outdoors
Regulations 2001
EN 62841-1:2015
EN 62841-4-1:2020
EN 55014-1:2017+A11:2020
EN 55014-2:2015
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
EN IEC 63000:2018
The Noise Emission in the Environment by Equipment for use Outdoors
Regulations 2001:
Measured sound power level 104 dB(A), guaranteed sound power level 106 dB(A)
Conformity assessment procedure in accordance with schedule 8. Product
category: 6
EU type examination no. 4811001.21007 by notified body no. 0158. Notified
body: DEKRA Testing and Certification GmbH,
Dinnendahlstraße 9, 44809 Bochum, Germany.
Robert Bosch Power Tools GmbH, 70538 Stuttgart, Germany represented (in terms
of the above regulations) by Robert Bosch Limited, Broadwater Park, North
Orbital Road,
Uxbridge UB9 5HJ, United Kingdom
Vonjy Rajakoba
Managing Director – Bosch UK
Martin Sibley
Head of Sales Operations and Aftersales
Robert Bosch Ltd. Broadwater Park, North Orbital Road, Uxbridge UB9 5HJ,
United Kingdom, as authorized representative acting on behalf of Robert Bosch
Power Tools GmbH, 70538 Stuttgart, Germany
Place of issue: Uxbridge Date of issue: 30/05/2023