CIGWELD W1004500 WELDSKILL 250 Mig Welder User Guide

: June 4, 2024
: CIGWELD

Table of Contents

CIGWELD W1004500 WELDSKILL 250 Mig Welder
Instructions
Features
PACKAGE CONTENTS
SPECIFICATIONS
MIG TORCH & SPARES & ACCESSORIES
OPTIONS – MIG WIRE (SOLID)
OPTIONS – SAFETY EQUIPMENT
OPTIONAL:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CIGWELD W1004500 WELDSKILL 250 Mig Welder

CIGWELD-W1004500-WELDSKILL-250-Mig-Welder

Instructions

The WeldSkill 250 is a single phase compact power source designed specifically for the handyman or tradesman that requires high quality welding performance. This constant voltage power source is rated at 250 amps @ 20%** duty cycle and provides excellent arc performance with solid or flux cored wires. The unit is suitable for use with either mixed shielding gases, CO2 or gasless operation.

PRONTO No. ..80727
Part No: W1004500
WELDSKILL 250 Mig Welder

Features

Power Source Weight 100.0kg
Plant (Package) Weight 125.0kg

Power Source

Dimensions H 1050mm
W 470mm
D 1020mm

PACKAGE CONTENTS

WeldSkill 250 MIG Welder Plant

WeldSkill 250 power source
Tweco Fusion 250 Mig Torch 3.6m
Work lead 3m,
Regulator/Flowmeter (Aus/NZ Only)
yclinder Chain, 200mm Spool Adaptor
Feed Rolls: 0.9/1.2mm V Groove (Fitted)
Contact Tips: 0.8mm, 0.9mm (Fitted), 1.0mm,1.2mm
Shielding Gas Hose Assembly

SPECIFICATIONS

Standards	AS 60974.1-2006 / IEC	60974-1 & AS1674
Number of Phases	1
Nominal Supply Voltage	240V +/- 10%
Nominal Supply Frequency	50Hz
Energy Input	This Column applies to the Factory Fitted 2.5mm2 (20A) Primary
Lead with 15A Supply Plug.	This Column applies to a 4.0mm2 (25A) Primary Lead

with a 25A Supply Plug.
Welding Current Range| 50-190A,| 50-270A
Effective Input Current (I1eff)| 15A| 24A
Maximum Input Current (I1max)| 33A| 54A
Generator Requirement| 8kVA| 13kVA
MIG (GMAW)| 190A @ 20%, 23.5V| 250A @ 20%, 26.5V
Welding Output, 40)C, 10 min.| 110A @ 60%, 19.5V

85A @ 100%, 18.3V

| 144A @ 60%, 21.2V

112A @ 100%, 19.6V

Number of Output Voltage Switch 12 Settings

With upgraded 4.0mm Supply Lead and 25A Supply Plug. Note: In order to achieve the maximum rated output & duty cycle ratings refer to Section 3.04 in the Operating Manual

MIG TORCH & SPARES & ACCESSORIES

OPTIONS – MIG ACCESSORIES

1| ..71572| FAB250X12| Weldskill MIG Torch 250A Euro 3.6m
2| ..70623| WSPLIER| Weldskill Mig Pliers
3| ..125650| W4012300| Tweco Mig Torch Consumable Organiser Box
4| ..42165| 646215| Chipping Hammer Spring Handle
5| ..42166| 704814| Spatter Safe – 400ml Pump Can
OPTIONS – MIG TORCH CONSUMABLES

1     ..42528| OTW14/23/R| Contact Tip Tweco No2/4, 0.6mm (10Ea/Pk)
2     ..42529| OTW14/30/R| Contact Tip Tweco No2/4, 0.8mm (10Ea/Pk)
3     ..42530| OTW14/35/R| Contact Tip Tweco No2/4, 0.9mm (10Ea/Pk)
4     ..53632| OTW14/40/R| Contact Tip Tweco No2/4, 1.0mm (10Ea/Pk)
5     ..42531| OTW14/45/R| Contact Tip Tweco No2/4, 1.2mm (10Ea/Pk)
6     ..42523| OTW22/50/R| Nozzle
OPTIONS – FEED ROLLS

1| ..150181| 7977729| Feedrolls 0.6/0.8mm V Groove Hard Wire
2| ..150182| 7977703| Feedrolls 0.9/1.2mm V Groove Hard Wire
3| ..150183| 7977733| Feedrolls 0.8/0.9mm U Groove Soft Wire
4| ..150184| 7977730| Feedrolls 1.0/1.2mm U Groove Soft Wire
5| ..150185| 7977734| Feedrolls 0.8/0.9mm V Knurled Flux Cored
6| ..150186| 7977347| Feedrolls 1.2/1.6mm V Knurled Flux Cored

NOTE: Feedrolls require 2ea/ part number as this is a 4 roll system

OPTIONS – MIG WIRE (SOLID)

2

3

| ..72560 WS5008 WeldSkill Mig Wire Mild Steel 0.8mm/5kg spool

..72561 WS5009 WeldSkill Mig Wire Mild Steel 0.9mm/5kg spool

---|---
4| ..36181| 720103| Autocraft LW1-6 Mig Wire Mild Steel 0.6mm/15kg spool
5| ..36182| 720114| Autocraft LW1-6 Mig Wire Mild Steel 0.8mm/15kg spool
6| ..41239| 720090| Autocraft LW1-6 Mig Wire Mild Steel 0.9mm/15kg spool
7| ..43367| 720096| Autocraft LW1-6 Mig Wire Mild Steel 1.2mm/15kg spool
OPTIONS – MIG WIRE (ALUMINIUM)

1| ..62318| 723224| Autocraft AL5356 1mm/2kg spool
2| ..48007| 722226| Autocraft AL5356 0.9mm/7kg spool
3| ..48008| 722227| Autocraft AL5356 1.2mm/7kg spool

OPTIONS – SAFETY EQUIPMENT

4 ..63799	454305	Weldskill Auto Dark Welding Helmet – Blue Shade 9-13
5 ..36205	453833	Hiderok Welding Helmet Lift Front
6 ..93228	646755	Heavy Duty Weldskill Gloves – Large
7 ..114801	646754	WeldSkill Leather Tig Welding Gloves – Large
8 ..145672	646771	JACKET WELDING Blue / Black – Medium
9 ..145673	646772	JACKET WELDING Blue / Black – Large
10 ..145674	646773	JACKET WELDING Blue / Black – X Large

OPTIONAL:

WeldSkill 4R Wirefeeder
Part No: W3000401
PRONTO No: ..80729
The WeldSkill 4 Roll Wirefeeder is specifically designed for use on both the WeldSkill 250 and 350 power sources. The unit can be easily added to either model power source by simply plugging in and selecting remote mode on the power source.
Wirefeeder Contents: 4R Feeder, 0.9/1.2mm V Groove Feed rolls, interconnection lead 8m

CIGWELD.COM.AU