SCARLETT SC-VC80C86 Vacuum Cleaner Instruction Manual
- June 13, 2024
- SCARLETT
Table of Contents
SCARLETT SC-VC80C86 Vacuum Cleaner
Product Information
The SC-VC80C86 is a vacuum cleaner designed for domestic use. It features a range of components and accessories to facilitate effective cleaning.
- Model: SC-VC80C86
- Power Supply: 220-240 V ~ 50 Hz
- Power Consumption: 1700 W
- Weight: 3.8 / 4.2 kg
- Dimensions: 260 mm x 230 mm x 330 mm
- Manufacturer: www.scarlett.ru
Product Usage Instructions
Please read the following instructions carefully to ensure safe and effective usage of the vacuum cleaner:
- Before using the appliance for the first time, check that the voltage indicated on the rating label matches the mains voltage in your home.
- This vacuum cleaner is intended for home use only and should not be used for industrial purposes.
- Avoid immersing the appliance in water or any other liquids. If this happens, do not touch the appliance, unplug it immediately, and seek assistance from a service center.
- Do not handle the plug with wet hands and avoid letting the cord hang over sharp edges or touch hot surfaces.
- Always unplug the appliance from the power supply when not in use and before servicing.
- If the power cord is damaged, it should be replaced by the manufacturer, service department, or a qualified professional to avoid any danger.
- To prevent deformation or fire accidents, avoid exposing the appliance to direct sunlight or placing it near heaters.
- This appliance is not suitable for use by physically, sensory, or mentally disabled individuals (including children) or those lacking life experience or knowledge, unless they are under supervision or have been instructed on the proper use of the unit by a responsible person.
- Ensure that children are supervised and not allowed to play with the appliance.
- Avoid folding or pulling the flexible hose too strongly to prevent damage.
- Do not insert any objects into the air outlets and ensure that the outlets are not blocked to maintain proper airflow. Keep thevacuum cleaner free of dust, hair, and other debris that may impede airflow.
- Exercise caution when cleaning on stairs.
- Prior to using the vacuum cleaner, remove any large or sharp objects from the floor to prevent damage to the unit.
- Caution: Do not plug the vacuum cleaner and other powerful electrical appliances into the power supply simultaneously to avoid voltage overload.
DESCRIPTION
- Wheel
- Dust collector
- Dust collector handle
- Dust collector cover
- Sucking inlet
- Dust collector bottom release button
- Dust collector bottom
- Dust collector lock button
- ON/OFF button
- Power cord winding button
- Sponge filter
- FLOOR/CARPET nozzle
- FURNITURE/CREVICE nozzle
- Retractable tube
- Hose
- Hose locks
- Hose base
- Hose air flow control switch
- Power cord and plug
- Outlet-sponge filter
IMPORTANT SAFEGUARDS
- Read this instruction manual carefully to prevent any unit damage or injure when using.
- When using this appliance, basic precautions should always be followed:
- Before the first use of the appliance check that the voltage indicated on the rating label corresponds to the mains voltage in your home.
- For home use only. Do not use for industrial purposes.
- The appliance is intended for use only in domestic aims.
- To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened DO NOT TOUCH the appliance, unplug it immediately and check in a service center.
- Do not handle the plug with wet hands. Never switch off the appliance by pulling the cord.
- Do not let the cord hang over sharp edges or touch hot surfaces.
- Always unplug the appliance from the power supply when not in use and before servicing.
- In case of power cord is damaged, its replacement should be done by the manufacture or service department or the other high-skill person to avoid any danger.
- To avoid deforming of plastic components of the appliance or fire accident, never leave the appliance exposed to direct sun light or near any heater.
- The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by responsible person.
- Children must be under control in order not to be allowed to play with the appliance.
- To avoid damage of the flexible hose, do not fold or pull it strongly.
- Do not put any object into air outlets. Do not use with outlet blocked. Keep free of dust, hair and anything that may reduce airflow.
- Be careful when cleaning on stairs.
- Before you start using the vacuum cleaner, please remove all large or sharp objects from the floor in order to prevent damage of the unit.
- CAUTION: To avoid voltage overload do not plug the unit and other powerful electrical appliances to the power supply at the same time.
- Never use the vacuum cleaner without filters.
- Do not use the appliance on wet surfaces. This unit does not absorb water.
- If you have cleaned the carpet with liquid detergent, let the carpet dry up completely before vacuuming it.
- Never use the appliance without dust bin. Replace the dust bin without delay if it is damaged.
- Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
- If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.
- The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.
- Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in the following format XX.XXXX where first two figures XX is the month of production, and following four figures XXXX is the year of production.
PREPARATION
- The device is designed to clean the floor from dust and small debris.
- In order to connect the hose to the vacuum cleaner insert hose base into sucking inlet and turn clockwise until it stops, disconnect the hose, turn it in the opposite direction.
- Insert the hose into the tube.
- Attach one of the nozzles to the tube:
- The “FLOOR/CARPET” combined nozzle is designed for carpet mats and similar floor coatings, and for flat surfaces;
- The “FURNITURE/SLOT” nozzle is designed for cleaning upholstered furniture, curtains and decorative surfaces.
INSTRUCTION FOR USE
- “Cyclone” system ensures maximum power during cleaning.
- Before starting, unwind the cord to sufficient length and insert the plug into the power supply. The yellow mark on the cord shows optimal cord length. Do not unwind the cord beyond the red mark.
- Press On/Off button to switch the unit on and press again to stop it.
- You can adjust the air flow using the air flow regulator on the flexible hose handle:
- Decrease flow for cleaning curtains, books, furniture, etc.
- Increase flow for cleaning bare floor.
- To rewind the cord, press the rewind button and guide the cord with hand to ensure that it does not whip causing damage.
WARNING!
- Be sure to clean the container after each cleaning.
- Never use the vacuum cleaner without installed filter and with damaged or dirty filter. Otherwise, dust will fall into the motor and cause damage to the vacuum cleaner.
- Don’t use the vacuum cleaner if the container is filled to the mark “MAX”. When the container is filled, dirty air clogs up the vacuum cleaner filter and the engine can overheat and disable.
- Don’t use the vacuum cleaner for cleaning of material debris such as cement, whitewash, plaster, metal shavings and etc. These particles cause to the engine damage.
- Don’t wash vacuum cleaner parts in a dishwasher or a construction machine.
CARE AND CLEANING
- Switch off the appliance and pull the plug from the power supply.
- Clean the appliance outside surface with soft cloth using mild non-abrasive detergent.
- Vacuum cleaner or cord should never be immersed into water or any liquids.
DUST COLLECTOR CLEANING
- Disconnect the vacuum cleaner from the mains.
- Detach the dust collector. For this purpose press the dust collector lock button.
- Empty the dust collector. For this purpose press the dust collector release button.
CLEANING OF FILTERS
- Clean the filters at least once a year. In case if the vacuum cleaner is used frequently, wash the filters after each 3 to 5 dust collector cleaning operations.
- Disconnect the vacuum cleaner from the mains.
- Open the dust collector cover and remove the main filter.
- Wash all plastic parts and sponge of the filter with warm running water, and then dry them thoroughly.
- After cleaning insert the filter into place. Close the dust collector cover rotating it clockwise.
- Wash the filter with running water and dry it thoroughly.
- After cleaning insert the filter into place.
STORAGE
- Place the appliance vertically.
- Insert the tube into special holder on the body.
- The symbol on the unit, packing materials and/or documentations means used electrical and electronic units and battery’s should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point.
- For additional information about actual system of the garbage collection address to the local authority.
- Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.
References
Read User Manual Online (PDF format)
Loading......