ABB 1SAM350010R1002 MS132-0.25K Motor Protection Circuit User Guide

ABB 1SAM350010R1002 MS132-0.25K Motor Protection Circuit

Product Details

• Product Name: MS132-0.25K Manual Motor Starter 0.16 … 0.25 A
• Extended Product Type: MS132-0.25K
• Product ID: 1SAM350010R1002
• EAN: 4013614400322

Product Information
The MS132-0.25K Manual Motor Starter is a device used to start and protect motors with a rated current of 0.16 to 0.25 A. It is designed to provide short-circuit protection and is suitable for use in various applications.

Dimensions

• Product Net Width: 45 mm
• Product Net Height: 112 mm
• Product Net Depth / Length: 87 mm
• Product Net Weight: 0.256 kg

Technical Specifications

• Rated Service Short-Circuit Breaking Capacity (Ics): (230 V AC) 100 kA, (250 V DC) 3 Poles in Series 10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu): (400 V AC) 100 kA, (440 V AC) 100 kA, (500 V AC) 100 kA, (690 V AC) 100 kA
• Rated Instantaneous Short-Circuit Current Setting (Ii): 3.1 A
• Setting Range: 0.16 … 0.25 A (400 V) Three Phase
• Rated Operational Power AC-3 (Pe): 0.06 kW
• Rated Operational Voltage: Main Circuit 690 V AC, Main Circuit 250 V DC
• Rated Operational Current (Ie): 0.25 A
• Rated Operational Current AC-3 (Ie): 0.25 A
• Rated Operational Current AC-3e (Ie): 0.25 A
• Rated Operational Current DC-5 (Ie): 0.25 A
• Rated Frequency (f): Main Circuit 50 Hz, Main Circuit 60 Hz
• Rated Impulse Withstand Voltage (Uimp): Main Circuit 6 kV
• Rated Insulation Voltage (Ui): 690 V
• Power Loss: at Rated Operating Conditions per Pole 0.7 … 1.6 W
• Number of Poles: 3
• Conventional Free-air Thermal Current (Ith): Main Circuit 0.25 A
• Degree of Protection: Housing IP20, Main Circuit Terminals IP20
• Pollution Degree: 2
• Electrical Durability: 1SBC100212C0203, 2CDC131120M6801, 2CDC131060M0202, 2CDC131063M6801, 1SAM300505F0102, 1SAM300507F0001, 1SAM300507F0003, 1SAM300508F0001, 1SAM300508F0003, 2CDC001079B0201
• Mechanical Durability: 9AKK108466A6074, 9AKK108466A6068, 9AKK107991A4712, 2CDC131153V0201
• Terminal Type: Pozidriv 2
• Connecting Capacity: 1 … 6 TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715, TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715, Electrical Conductive Board, Horizontal – Up to 400 V 0 mm, Electrical Conductive Board, Horizontal – Up to 690 V 1.5 mm, Electrical Conductive Board, Vertical 75 mm, Other Device Same Type, Horizontal 0 mm, Other Device Same Type, Vertical 150 mm

Usage Instructions

1. Ensure that the power supply to the motor is disconnected before installing the MS132-0.25K Manual Motor Starter.
2. Mount the MS132-0.25K on a DIN rail with the recommended mounting distance.
3. Connect the motor to the MS132-0.25K using the appropriate connecting capacity.
4. Use a screwdriver with the recommended size to tighten the connections.
5. Verify that the wire stripping length is correct for the terminal type.
6. Position the MS132-0.25K in the desired mounting position.
7. Ensure that the actuator type is set to the desired contact position (ON/OFF/TRIP).
8. Refer to the standards and regulations for proper installation and usage of the MS132-0.25K.

PRODUCT-DETAILS

MS132-0.25K

MS132-0.25K Manual Motor Starter 0.16 … 0.25

General Information

Ordering

• Minimum Order Quantity 1 piece
• Customs Tariff Number 85362010

Popular Downloads

• Data Sheet, Technical Information 1SBC100212C0203
• Instructions and Manuals 2CDC131120M6801
• Manuals Manuals (Part 2) 2CDC131060M0202
• Ex Operating Instructions 2CDC131063M6801
• Time-Current Characteristic Curve 1SAM300505F0102
• I²t Characteristic 1SAM300507F0001 1SAM300507F0003
• Cut-off Current Characteristic 1SAM300508F0001 1SAM300508F0003
• CAD Dimensional Drawing 2CDC001079B0201
• Installation Video 9AKK108466A6074 9AKK108466A6068
• Marketing Video 9AKK107991A4712 2CDC131153V0201

Dimensions

• Product Net Width 45 mm
• Product Net Height 112 mm
• Product Net Depth /Length 87 mm
• Product Net Weight 0.256 kg

Technical

• Rated Service Short- (230 V AC) 100 kA

• Circuit Breaking (250 V DC) 3 Poles in Series 10 kA

• Capacity (Ics) (400 V AC) 100 kA
  (440 V AC) 100 kA
  (500 V AC) 100 kA
  (690 V AC) 100 kA

• Rated Ultimate Short- (230 V AC) 100 kA

• Circuit Breaking (400 V AC) 100 kA

• Capacity (Icu) (440 V AC) 100 kA
  (500 V AC) 100 kA
  (690 V AC) 100 kA

• Rated Instantaneous Short-Circuit Current Setting (Ii) 3.1 A

• Setting Range 0.16 … 0.25 A

• Rated Operational Power AC-3 (Pe) (400 V) Three Phase 0.06 kW

• Rated Operational Power AC-3e (Pe) (400 V) Three Phase 0.06 kW

• Rated Operational Voltage Main Circuit 690 V AC Main Circuit 250 V DC

• Rated Operational Current (Ie) 0.25 A

• Rated Operational Current AC-3e (Ie) 0.25 A

• Rated Operational Current DC-5 (Ie) 0.25 A

• Rated Frequency (f) Main Circuit 50 Hz Main Circuit 60 Hz

• Rated Impulse Withstand Voltage (Uimp ) Main Circuit 6 kV

• Rated Insulation Voltage (Ui) 690 V

• Power Loss at Rated Operating Conditions per Pole 0.7 … 1.6 W

• Number of Poles 3

• Conventional Free-air Thermal Current (Ith) Main Circuit 0.25 A

• Degree of Protection Housing IP20

• Main Circuit Terminals IP20

• Pollution Degree 3

• Electrical Durability 50000 cycle

• Mechanical Durability 100000 cycle

• Terminal Type Push-in Spring Terminals

• Connecting Capacity Main Circuit Flexible with Ferrule 1/2x 0.5 … 4 mm² Flexible with Insulated Ferrule 1x 0.5 … 4 mm² Flexible with Insulated Ferrule 2x 0.5 … 2.5 mm² Flexible 1/2x 0.75 … 4 mm²

• Solid 1/2x 1 … 2.5 mm²

• Stranded 1/2x 1 … 6 mm²

• Wire Stripping Length Main Circuit 12 mm

• Recommended Screw Driver Pozidriv 2

• Mounting Position 1 … 6

• Mounting on DIN Rail TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715 TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715

• Minimum Mounting Distance Electrical Conductive Board, Horizontal – Up to 400 V 0 mm Electrical Conductive Board, Horizontal – Up to 690 V 1.5 mm Electrical Conductive Board, Vertical 75 mm

• Other Device Same Type, Horizontal 0 mm

• Other Device Same Type, Vertical 150 mm

• Actuator Type Rotary Handle

• Contact Position Indication  ON / OFF / TRIP
  Standards IEC/EN 60947-1
  IEC/EN 60947-2
  IEC/EN 60947-4-1
  UL 60947-1
  UL 60947-4-1

• Remarks UL508 Self-Protected Combination Motor Controller (Type E) in combination with terminal spacer TS1-M3-K

Technical UL/CSA

• Short-Circuit Current Rating (SCCR) Manual Self-Protected Combination Controllers (Type E), (480Y / 277 V AC) 65 kA
• Manual Self-Protected Combination Controllers (Type E), (600Y / 347 V AC) 47 kA
• Any UL Listed Fuses or Circuit-Breakers, Group Installations (480 V AC) 65 kA
• Any UL Listed Fuses or Circuit-Breakers, Group Installations (600 V AC) 47 kA
• Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (480 V AC) 65 kA
• Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (600 V AC) 47 kA
• Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (480Y / 277 V AC) 65 kA
• Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (600Y / 347 V AC) 47 kA
• Maximum Operating Voltage UL/CSA Main Circuit 600 V AC
• Full Load Amps Motor (200 V AC) Three Phase 0.25 A (208 V AC) Three Phase 0.25 A
• (220 … 240 V AC) Three Phase 0.25 A (440 … 480 V AC) Three Phase 0.25 A (550 … 600 V AC) Three Phase 0.25 A
• Locked Rotor Amps (200 V AC) Three Phase 1.5 A
• (208 V AC) Three Phase 1.5 A
• (220 … 240 V AC) Three Phase 1.5 A (440 … 480 V AC) Three Phase 1.5 A (550 … 600 V AC) Three Phase 1.5 A
• General Use Rating UL/CSA (600 V AC) 0.25 A
• Connecting Capacity Main Circuit UL/CSA Stranded 1/2x 18-10 AWG Stranded 1x 8 AWG

Environmental

• Ambient Air Around the Enclosure 0 … +40 °C
• Temperature Operation -25 … +70 °C
• Operation Compensated -25 … +60 °C Storage -50 … +80 °C
• Ambient Air Temperature Compensation Yes
• Maximum Operating Altitude Permissible 2000 m
• Resistance to Shock acc. to IEC 60068-2-27 11 ms Pulse 25g
• Resistance to Vibrations acc. to IEC 60068-2-6 5g / 3 … 150 Hz
• RoHS Status Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019

Certificates and Declarations

• ABS Certificate 1SAA963001-0101

• ATEX Certificate 1SAA963000-3902

• CB Certificate 1SAA963002-2002

• CQC Certificate CQC2017010307034621

• Cut-off Current 1SAM300508F0001

• Characteristic   1SAM300508F0003

• Declaration of Conformity – CCC 2020980307004600

• Declaration of Conformity – CE 1SAD101100-3402

• Declaration of Conformity – UKCA 1SAD201100-3402

• EAC Certificate 1SAA963004-2701

• I²t Characteristic 1SAM300507F0001
  1SAM300507F0003

• IECEx Certificate 1SAA963000-4001

• KC Certificate 1SAA963002-1502

• RINA Certificate 1SAA963002-0802

• UL Certificate E137861-20090225

• E345003-20090225

Container Information

• Package Level 1 Units box 1 piece
• Package Level 1 Width 50 mm
• Package Level 1 Depth /Length 117 mm
• Package Level 1 Height 82 mm
• Package Level 1 Gross Weight 0.282 kg
• Package Level 1 EAN 4013614400322
• Package Level 2 Units carton 28 piece
• Package Level 2 Width 280 mm
• Package Level 2 Depth /Length 395 mm
• Package Level 2 Height 210 mm
• Package Level 2 Gross Weight 14.026 kg
• Package Level 2 EAN 4013614522642

Classifications

• Object Classification Code F
• ETIM 5 EC000074 – Motor protective circuit-breaker
• ETIM 6 EC000074 – Motor protection circuit-breaker
• ETIM 7 EC000074 – Motor protection circuit-breaker
• ETIM 8 EC000074 – Motor protection circuit-breaker
• eClass V11.0 : 27370401
• UNSPSC 39121521
• IDEA Granular Category Code (IGCC) 4731 >> Manual Starters
• E-Number (Finland) 3707832
• E-Number (Sweden) 3110451

Accessories

Categories

• Low Voltage Products and Systems → Circuit Breakers → Manual Motor Starters
• Low Voltage Products and Systems → Control Products → Manual Motor Starters → Manual Motor Starters

MS132-0.25K

© 2023 ABB. All rights reserved. 2023/08/10 Subject to change without notice

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>