Limcet Link Wireless Carplay Android Retrofit Kit User Manual
- June 6, 2024
- Limcet
Table of Contents
Link Wireless Carplay Android Retrofit Kit
User Manual
Introduction
Thank you for choosing to use this Limcet BOX.
CarPlay
The iPhone’s built-in car-machine interaction system works with the central
control knob button to operate the voice control phone, information,
navigation, music and Siri voice interaction for more information; supports
wireless and wired connections to CarPlay
CarLife
The car and machine care system developed by Baidu supports the connection of
iPhone and Android devices, voice control of telephone, information,
navigation, and music; built-in “Xiaodu” voice control system, supports
wireless and wired connections
AndroidAuto
The original ecological Android car-machine interaction system developed by
Google, voice control phone, information, navigation, music built-in voice
control system;
Front/Rear/360
The intelligent module can decode video and can be equipped with front view,
rear view (support display intelligent dynamic trajectory and radar), right
view and 360 panoramic view
Mirroring
Supports wired and wireless screen projection for iphone and Android phones
AHD HD video protocol
Added AHD HD rearview/360 video output interface
USB video
Automatic media playback function can directly insert U disk to play audio and
video media
DSP Power amplifier chip
Add DSP power amplifier chip to improve sound quality
Box parameters and warranty
Running Voltage: 9-16V, 14.4V（rated）;
Operating temperature：-30~+75℃;
Power consumption current：1A（rated），3A（Max）;
Quiescent current： less than 3mA;
Storage temperature：-30~+85℃；
Shutdown current：300mA（Clock is on）；
Charging current： ≤ 1.5A.when the USB charging current is > 3A, the host computer of the radio and receiver should start the circuit protection function to control the current below 1.5A to avoid burning the product.
Packing List
This car system consists of the following 9 units: 1080P video decoding, lossless music, Bluetooth hands-free, Mirroring, CarLife, Android Auto, rearview, AV-IN, Carplay, Hisar system settings. The main interface of the care system mainly contains eight commonly used modules: video, music, Mirroring, Carplay, Hisar/CarLife/Android Auto, Bluetooth, video input, and settings. The instructions for each function will be introduced in turn later
Warranty Terms
Dear user:
Thank you for using our products. In order to make sure customers receive the
product is good, all our products have been strictly tested in our factory
before delivery. And all our products enjoy a 1-year warranty.
But following conditions are not covered by warranty:
a. Warranty period over; the appearance with scratches dirt, deformation.
b. Information on Warranty car and purchase bill inconsistent with the
product, or modified.
c. There is no bar code or bar code not clearly on the host unit.
Damage caused by using, disassembling, or refitting product not following the
instruction properly.
Not our company authorized personnel to disassemble. repair or refit to cause
human-made damage.
The product is damaged by improper transport or improper use.
Damage due to irresistible factors (such as fire, flood, traffic matters,
therefore, lightning, earthquakes, etc.).
Interface introduction
System settings
Regarding system settings, after the vehicle is started, the main interface of
the vehicle system will be displayed. In the main interface, there is a
[Settings] button.
You can directly click the setting button to enter the main setting page. As
shown in the following figure: each setting page of the system. Chart
2.1-System Settings “General Settings”
System settings “Original car settings”-“Driving-reversing camera” option
System Settings “Original Car Settings”-“-Panel- Contrast” Brightness” adjustment page
In this interface-click to show
Enter brightness, contrast, chroma, saturation adjustment
Open Carplay to view the operating instructions
Bluetooth search example “right picture”
About network usage
The vehicle system uses the mobile phone’s own network to use, and the traffic cost refers to the connected network. When the car system is connected to the wireless CarPlay, you only need to manually connect the Bluetooth of the mobile phone for the first time, and keep the Bluetooth of the mobile phone always on. After the CarPlay connection is successful, the Bluetooth of the mobile phone and the system will be automatically disconnected; then enter the WIFI authentication channel, and at the same time The mobile phone WIFI switch should also be turned on, but do not manually connect to the WIFI network of the local system. CarPlay will actively identify the dedicated hotspot and transmit the pop-up window to the car display. Install the mobile phone connection and the IPhone wired connection, just plug in the mobile phone data cable to complete the connection, no network is required
About driving safety
Drivers should not operate the machine during driving, so as not to affect safe driving and cause traffic accidents. Safety first, smart entertainment second, please strictly abide by national traffic regulations!
Postscript
So far, you have learned about the comprehensive and easy-to-use in-vehicle
system software.
You can now operate the car machine to experience the convenience and speed
brought by the smart light screen system to your driving life, and enjoy the
infinite joy brought by high technology! I wish you a smooth and safe journey!
Due to the continuous upgrade of the software version, the screenshots in this
manual may differ from the version you actually use without prior notice
FCC Caution
(1)§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
§ 15.21 Changes or modification warning Any Changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. § 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body.