TISSOT DGT-2040 Quartz Digital Watch User Manual

: June 13, 2024
: Tissot

Table of Contents

HOME
Functions
DATE
Display the date temporarily
OTHER
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TISSOT DGT-2040 Quartz Digital Watch User Manual

HOME

Welcome to your QUARTZ DIGITAL watch manual
Functions

Push-button press time

Single press

Pressed for more than 0.5 second

Pressed for more than 3 seconds

Functions

Select a pictogram to access the corresponding function

Functions

General setting procedure

All settings are made using the same proc

Select the function
Enter setting mode
The whole screen flashes once
Adjust the value
Confirm and exit setting mode

DATE

Setting

Select DATE
Enter setting mode
The whole screen flashes once, then the year is
displayed and flashes****
Adjust the value
Confirm the selection and move on to the next
setting
The month flashes
Adjust the value
Confirm the selection and move on to the next
setting
**The day flashes

**

Adjust the value
Confirm and exit setting mode

Display the date temporarily

In time display mode, you can temporarily display the date
Press once
The screen displays the date
After 5 seconds, it reverts to time display mode

T1
Setting the time, setting the primary time The time can be displayed in 12- or 24-hour mode

Setting

1 Select T1

2Enter setting mode
The whole screen flashes once, then the hour flashes

Adjust the value
Confirm and move on to the next setting
**** The minutes flash
Adjust the value
Confirm and move on to the next setting

**** The seconds flash

Adjust the value
Confirm and move on to the next setting

**** The seconds flash

Adjust the value
Confirm and move on to the next setting
Select 12- or 24-hour display mode
Confirm and exit setting mode

T2

Secondary time setting (second time zone)

Setting

Select T2
Enter setting mode

**** The whole screen flashes once, then the hour flashes
Adjust the value
Confirm and move on to the next setting

**** The minutes flash

Adjust the value

**** Move forward or backward +/-15 minutes
Confirm and exit setting mode
**** The seconds cannot be set and are always identical

LAP

Timing in LAP mode (lap time)

Information

The LAP function is a chronometer designed to measure the lap time in a running race or motor race.

For example: measuring the lap time taken for a long-distance runner.

Measurement range

Maximum measurement time: 100 days
Measurement resolution (less than 1 hour): 1/100”
Measurement resolution (more than 1 hour): 1”

Minutes-seconds-hundredths display

Hours-minutes-seconds display

Use

Select the LAP chrono

**** To be able to select the LAP function, the SPLIT chrono needs to be reset and vice versa

Start timekeeping
Each time the runner completes a lap, press to record the lap time

**** The recorded time flashes on the display for

seconds, then the current timing is displayed again On the runner’s last lap, stop timekeeping

**** The last lap time is recorded

Display the first recorded time

After 2 seconds, the time is displayed
Press again to display the next time
Press twice to go directly to the next time
**** After 20 seconds, the display returns to the total time
Resetting the chronograph to zero

**** Resetting the current timing to zero deletes the stored data

SPLIT

Timing in SPLIT mode (split times)

Information

The SPLIT function is a chronometer for measuring the total duration of a race for up
to 99 runners or vehicles participating in the same timed event.
For example: measuring the finish time for several runners in a 100-metre sprint

Measurement range
Maximum measurement time: 100 days
Measurement resolution (less than 1 hour): 1/100”
Measurement resolution (more than 1 hour): 1”

Minutes-seconds-hundredths display

Hours-minutes-seconds display

Use

Select SPL chrono

**** To be able to select the SPLIT function, the LAP chrono needs to be reset and vice versa

Start timekeeping

**** The first split time is measured

Timing in SPLIT mode

As each runner passes, press to record their time
**** The recorded time flashes on the display for seconds, then the current timing is displayed again

When the last runner passes, stop timekeeping
Display the first recorded time

After 2 seconds, the time is displayed
Press again to display the next time
Press twice to go directly to the next time
**** After 20 seconds, the display returns to the total time
Resetting the chronograph to zero

**** Resetting the current timing to zero deletes the stored data

TIMER

The TIMER function enables you to start a countdown of up to 23 hours 59 mins 59 secs.

Setting

Select TIMER
Enter setting mode

**** The whole screen flashes once, then the hour flashes 3″
Adjust the value
Confirm and move on to the next setting

**** The minutes flash
Adjust the value
Confirm and move on to the next setting

**** The seconds flash

Adjust the value
Confirm and exit setting mode

AL

The watch is equipped with an alarm function that beeps at the set time.

How it works

At the set time (relative to T1), a beep will sound for 30 seconds, and the display will
flash until the alarm is cleared.

General information

There is no alarm snooze feature.
The alarm is deactivated for:
setting the time T1;
setting the alarm;
the watch is in deep power save mode after manually entering this mode

Setting

Select AL
Enter setting mode

**** The whole screen flashes once, then the hour flashes 3″
Adjust the value
Confirm and move on to the next setting

**** The minutes flash
Adjust the value
Confirm and exit setting mode

**** The alarm is activated

Clearing the alarm

Press any push-button

**** The alarm remains active for the next set alarm time (see deactivation below).

Activating/deactivating the alarm

Select AL
Press to deactivate the alarm

**** The alarm is deactivated

Press again to reactivate the alarm

OTHER

Light

Illuminating the display

Press to light up the display
Light duration: 5 seconds

Pressing any push-button extends the illumination time
When the light is on, the sound is off 0.5″

Sound

Activation/deactivation
Press the 2 push-buttons simultaneously to activate or deactivate the sound. When the sound is activated, the watch will beep when the push-buttons are pressed.
In all modes except LAP and SPLIT 2″

Standby

Exit standby mode
In standby mode, press to reactivate the watch 0.5″

Battery

When the display shows “bat”, the battery needs replacing.