Solbadet D64-202201 Spa Blowers Instruction Manual
- June 13, 2024
- Solbadet
Table of Contents
Solbadet D64-202201 Spa Blowers
AIR BLOWER MANUAL INSTRUCTION
Products Performance
- 220-240Y /50Hz/60Hz or 11 O-l 20V/50Hz/60Hz
- Insulation class F
- Thermal protector of YDE or UL approval
- Noise: Air blower with nozzle < 72dB.
- There is fuse inside the motor
Parts And Materials
- Pump casing: high temperature resistant reinforce plastic
- Air switch: J 5A,250V(Optional)
- Carbon brush: using import materials
Using and Installing
- The number of nozzle installed should be more than the number of regulation minimum.
- There should be at least 10mm space around the air blower for good ventilation.
- The installation of check valve must be higher than the using water-level in case water come . into air blower pump.(Fig. 1)
- The connect pipe of air blower pump must use resist heat pipe.
- Air blower pump must be installed fixed, and the connect pipe must be fastened, in a horizontal position. Use screw to fix the air blower on bathtub mounting plate.
WARNING
- As to main ta in the IP rating, the blower must be mounted horizontally.
- The blower shall be installed by licensed.
- Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
- Parts containing live parts must be inaccessible to persons in the spa.
- The appliance should be supplied through a residual current device (RCD) having a rated residual opera I ing current not exceeding 30 mA.
- Parts should be installed in the correct zone and that equipotential bonding should be carried out.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience.
- knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- This air blower is only intended for fixed spa.
- Not for transportation spa/ portable spa, swimming pool.
- The earthing of the air blower must be permanently connected to fixed wiring.
- Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
- Contact your local government for information regarding the collection systems available.
- If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
Installation Structure
- D in fig.is thread connection that union of
32and 33.5 available - D in fig.is direct connection that have
32 ; 33.5 and 48 available.
Technical parameter list
Configurations table
CAUTION
- Air blower pump must be grounded in order to prevent electrical shock or injury, by a Licensed Electrician.
- Outlet of air blower pump can not be Blocked up when it is operating.
- When the outlet air flow is too small, the air temp
- erasure will increase, pay attention to prevent scald.
- The power must be cut off before checking the air blower pump.
- his air blower must only be installed by the Manu -facture, its service agent or similarly qualitied
- persons according to the wiring rules. The cleaning and maintenance also.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>