QOLSYS IQ4 NS Controls Launches Eew Entry Level Sreen Free User Guide
- June 13, 2024
- Qolsys
Table of Contents
QOLSYS IQ4 NS Controls Launches Eew Entry Level Sreen Free
Product Information
The IQ4 NS is a security panel designed for residential and commercial use. It is a UL/cUL certified alarm control unit that conforms to ANSI/UL Standards UL985, UL1023, & UL2610. The panel is manufactured by Qolsys, Inc. and is equipped with a SmartMount backplate for wall mounting. The panel features a power button, a status LED, and a barrel jack for connecting the power supply.
Product Usage Instructions
- Wall Mount:
- Using a small Phillips screwdriver, undo the locking screw from the back of the panel and remove the SmartMount backplate.
- Mount the backplate to the wall using flat head screws and appropriate wall anchors if needed, ensuring it is level.
- If using the model with the legacy security radio, drill a 1/4″ hole in the wall on the right-hand side of the backplate and feed the white RF antenna into the wall.
- For UL 2610 and EN Grade 2 installations, insert a screw in the breakaway wall tamper.
- Connect Power Supply:
- Connect the power supply to the barrel jack on the back of the panel.
- Mount Panel:
- Latch the top of the IQ4 NS onto the SmartMount backplate.
- Swing the panel down towards the backplate and press firmly against the wall.
- Using a small Phillips screwdriver, screw in the locking screw from the bottom of the panel to secure it to the wall.
- Power Up:
- Press and hold the power button on the right side of the panel for 3 seconds to power up.
- Setup Wizard:
- Download the IQ Installer app from the Apple or Google Play stores on your smart device.
- Open the IQ Installer Interface and tap “Start” to begin.
- Tap “Scan QR Code” and position your phone to scan the QR label on the back of the panel or the side of the box. Tap “Continue”.
- Press the Power Button twice within 3 seconds.
- The Status LED will turn solid Blue. Tap “Next” on the screen.
- Enter the default Installer (1111) or Dealer (2222) code to connect.
- When prompted, change the default code to a new installer code.
- Select “Dashboard” and tap “Launch Wizard”.
Please note that reproduction of Qolsys, Inc. proprietary materials without written consent is not permitted. For technical support, you can contact intrusion-support@jci.com. For more detailed information about end-user license agreement, please read the provided documentation.
WALL MOUNT
With a small Phillips screwdriver, undo the locking screw from the back of the panel and remove the SmartMount backplate.
- Mount the backplate to the wall using flat head screws* and appropriate wall anchors if needed, ensuring it is level.
- If using the model with the legacy security radio, in the provided hole on the right hand side of the backplate drill a 1/4” hole in the wall and feed the white RF antenna into the wall.
- A screw is required in breakaway wall tamper for UL 2610 and EN Grade 2 installations.
Connect the power supply to the barrel jack on the back of the panel
- Latch the top of the IQ4 NS onto the SmartMount backplate.
- Swing the panel down towards the backplate and press firmly against the wall.
- With a small Phillips screwdriver, screw in the locking screw from the bottom of the panel to secure it to the wall.
Connect power supply
WARNING! Use 7vDC Power Supply ONLY
-
Press and hold the power button on the right side of the panel for 3 seconds to power up
-
CREATE ACCOUNT
TRY THE MOBILE TECH APP -
SETUP WIZARD
From your smart device, download “IQ Installer” from the Apple or Google Play
stores to connect to IQ4 NS over Wi-Fi to complete local system setup. To
connect, complete the following steps:
1. Open the “IQ Installer Interface”, tap Start on the phone screen to begin. Tap Scan QR Code, then position your phone and scan the QR label on the back of the panel or the side of the box. Tap Continue.
2. Press the Power Button twice within 3 seconds.
3. The Status LED will turn solid Blue. Tap Next on the screen.
4. Enter the default Installer (1111) or Dealer (2222) code to connect.
5. When prompted, change the default code to a new installer code.
6. Select Dashboard, then tap Launch Wizard.QOLSYS, INC. END USER LICENSE AGREEMENT
PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE INSTALLING
OR USING THE SOFTWARE EMBEDDED IN OR USED WITH THE HARDWARE PRODUCTS PROVIDED
BY QOLSYS (“QOLSYS PRODUCTS”) AND ALL OTHER SOFTWARE AND DOCUMENTATION
PROVIDED BY QOLSYS WITH OR FOR USE WITH THE ACCOMPANYING QOLSYS PRODUCTS
(COLLECTIVELY, THE “SOFTWARE”). THE TERMS AND CONDITIONS OF THIS END USER
LICENSE AGREEMENT (“AGREEMENT”) GOVERN USE OF THE SOFTWARE PROVIDED BY QOLSYS,
INC. (“QOLSYS”).
Qolsys is willing to license the Software to you only upon the condition that you accept all the terms contained in this Agreement. If you install or use the Software, then you have indicated that you understand this Agreement and accept all of its terms. If you are accepting the terms of this Agreement on behalf of a company or other legal entity, you represent and warrant that you have the authority to bind that company or other legal entity to the terms of this Agreement, and, in such event, “you” and “your” will refer to that company or other legal entity. If you do not accept all the terms of this Agreement, then Qolsys is unwilling to license the Software to you, and you are not authorized to use the Software. “Documentation” means Qolsys’ then current generally available documentation for use and operation of the Software.
Grant of License:
Conditioned upon your compliance with the terms and conditions of this
Agreement, Qolsys grants you a revocable non-exclusive, non-transferable and
non-sublicensable license to use the Software, solely as embedded in or pre-
installed on the Qolsys Products and solely for your non-commercial personal
Qolsys reserves all rights in the Software not expressly granted to you in
this Agreement. As a condition to this license, Qolsys may collect, use and
share with its engineering and marketing partners certain information about
your Qolsys Products and how they are used.
Your use of the Software must be in accordance with its Documentation. You will be solely responsible for ensuring your use of the Software is in compliance with all applicable foreign, federal, state and local laws, rules and regulations. Except for any rights provided with respect to included open source software or as expressly specified in this Agreement, you may not: (a) copy, modify (including but not limited to adding new features or otherwise making adaptations that alter the functioning of the Software), or create derivative works of the Software; (b) transfer, sublicense, lease, lend, rent or otherwise distribute the Software to any third party; or (c) otherwise use the Software in a way not permitted by the terms of this Agreement. You acknowledge and agree that portions of the Software, including but not limited to the source code and the specific design and structure of individual modules or programs, constitute or contain trade secrets of Qolsys and its licensors. Accordingly, you agree not to disassemble, decompile or reverse engineer the Software, in whole or in part, or permit or authorize a third party to do so, except to the extent such activities are expressly permitted by law notwithstanding this prohibition. The Software may be subject to additional restrictions and conditions on use as specified in the Documentation, which additional restrictions and conditions are hereby incorporated into and made a part of this Agreement. Under no circumstances will Qolsys be liable or responsible for any use, or any results obtained by the use, of the services in conjunction with any services, software, or hardware that are not provided by Qolsys. All such use will be at your sole risk and liability.
The copy of the Software is licensed, not sold. You own the Qolsys Product in which the Software is embedded, but Qolsys and its licensors retain ownership of the copy of the Software itself, including all intellectual property rights therein. The Software is protected by United States copyright law and international treaties. You will not delete or in any manner alter the copyright, trademark, and other proprietary rights notices or markings appearing on the Software as delivered to you. This Agreement does not grant you any rights in connection with any trademarks or service marks of Qolsys, its affiliates or its suppliers.
Maintenance
Support and Qolsys is under no obligation to maintain, support or update the Software in any way, or to provide updates or error corrections. However, if any bug fixes, maintenance releases or updates are provided to you by Qolsys, its dealers or a third party, such fixes, releases and updates are and shall be considered “Software”, and will be subject to the terms of this Agreement, unless you receive a separate license from Qolsys for that release or update that supersedes this Agreement.
Subsequent:
Qolsys may also supersede this Agreement with a subsequent Agreement
pursuant to providing you with any future component, release, upgrade or other
modification or addition to the Software. Similarly, to the extent that the
terms of this Agreement conflict with any prior Agreement or other agreement
between you and Qolsys regarding the Software, the terms of this Agreement
shall prevail.
The license granted under this Agreement remains in effect for a period of 75 years, unless earlier terminated in accordance with this Agreement. You may terminate the license at any time by destroying all copies of the Software in your possession or control. The license granted under this Agreement will automatically terminate, with or without notice from Qolsys, if you breach any term of this Agreement. In addition, either party may, in its sole discretion, elect to terminate this Agreement on written notice to the other party upon the bankruptcy or insolvency of the other party or upon the bankruptcy or insolvency of the other party upon the commencement of any voluntary or involuntary winding up, or upon the filing of any petition seeking the winding up of the other party. Upon termination or expiration of this Agreement, the license granted in Section will automatically terminate and you must at Qolsys’ option, either promptly destroy or return to Qolsys all copies of the Software in your possession or control. On Qolsys’ request, you will provide Qolsys with a signed written statement confirming that the Software has been permanently removed from your systems.
Limited Warranty
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND. QOLSYS
DISCLAIMS ALL WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT, AND ANY WARRANTIES AND
CONDITIONS ARISING OUT OF COURSE OF DEALING OR USAGE OF TRADE. NO ADVICE OR
INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED FROM QOLSYS OR ELSEWHERE WILL
CREATE ANY WARRANTY OR CONDITION NOT EXPRESSLY STATED IN THIS AGREEMENT.
QOLSYS DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR EXPECTATIONS OR
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE ERROR-FREE OR
UNINTERRUPTED, OR THAT ALL SOFTWARE ERRORS WILL BE CORRECTED.
Limitation of Liability
QOLSYS’ TOTAL LIABILITY TO YOU FROM ALL CAUSES OF ACTION AND UNDER ALL
THEORIES OF LIABILITY WILL BE LIMITED TO $100. IN NO EVENT WILL QOLSYS BE
LIABLE TO YOU FOR ANY SPECIAL, INCIDENTAL, EXEMPLARY, PUNITIVE OR
CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF PROPERTY OR LOSS OF DATA OR BUSINESS
INTERUPTION) OR FOR THE COST OF PROCURING SUBSTITUTE PRODUCTS ARISING OUT OF
OR IN CONNECTION WITH THIS AGREEMENT OR THE EXECUTION OR PERFORMANCE OF THE
SOFTWARE, WHETHER SUCH LIABILITY ARISES FROM ANY CLAIM BASED UPON CONTRACT,
WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, AND
WHETHER OR NOT QOLSYS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS OR
DAMAGE. THE FOREGOING LIMITATIONS WILL SURVIVE AND APPLY EVEN IF ANY LIMITED
REMEDY SPECIFIED IN THIS AGREEMENT IS FOUND TO HAVE FAILED OF ITS ESSENTIAL
Some jurisdictions do not allow the limitation or exclusion of liability for
incidental or consequential damages, so the above limitation or exclusion may
not apply to you.
S. Government End Users
The Software and Documentation are “commercial items” as that term is
defined in FAR 2.101, consisting of “commercial computer software” and
“commercial computer software documentation,” respectively, as such terms are
used in FAR 12.212 and DFARS 227.7202. If the Software and Documentation are
being acquired by or on behalf of the U.S. Government, then, as provided in
FAR 12.212 and DFARS 227.7202-1 through 227.7202-4, as applicable, the U.S.
Government’s rights in the Software and Documentation will be only those
specified in this Agreement. Export You agree to comply fully with all U.S.
export laws and regulations to ensure that neither the Software nor any
technical data related thereto nor any direct product thereof are exported or
re- exported directly or indirectly in violation of, or used for any purposes
prohibited by, such laws and regulations.
Open Source and Other Third Party
Portions of the Software may be subject to certain third party license
agreements governing the use, copying, modification, redistribution and
warranty of those portions of the Software, including what is commonly known
as “open source” software. Such portions of the Software are governed solely
by the terms of such other license, and no warranty is provided under this
Agreement for open source software. By using the Software you are also
agreeing to be bound to the terms of such third party licenses. If provided
for in the applicable third party license, you may have a right to reverse
engineer such software or receive source code for such software for use and
distribution in any program that you create, so long as you in turn agree to
be bound to the terms of the applicable third party license, and your programs
are distributed under the terms of that license. If applicable, a copy of such
source code may be obtained free of charge by contacting your Qolsys
representative. This Agreement shall not be construed to limit the rights you
may otherwise have with respect to the Linux operating system and other third-
party technology or software licensed under open source or similar license
terms. Please see our website at www.qolsys.com for
a list of those components and their respective license terms.
You acknowledge that the ideas, methods, techniques, and expressions thereof contained in the Software (collectively, “Qolsys Confidential Information”) constitute confidential and proprietary information of Qolsys, the unauthorized use or disclosure of which would be damaging to Qolsys. You agree to hold the Software and Qolsys Confidential Information in strictest confidence, disclosing information only to permitted individual employees who are required to have access in order to perform under this Agreement and to use such information only for the purposes authorized by this Agreement. You are responsible for and agree to take all reasonable precautions, by instruction, agreement or otherwise, to ensure that your employees who are required to have access to such information in order to perform under this Agreement, are informed that the Software and Qolsys Confidential Information are confidential proprietary information belonging to Qolsys and to ensure that they make no unauthorized use or disclosure of such information. You may disclose Qolsys Confidential Information if you are required to do so pursuant to a governmental agency, a court of law or to any other competent authority so long as you provide Qolsys with written notice of such request prior to such disclosure and cooperate with Qolsys to obtain a protective order. Prior to disposing of any media reflecting or on which is stored or placed any Software, you will ensure any Software contained on the media has been securely erased or otherwise destroyed. You recognize and agree a remedy at law for damages will not be adequate to fully compensate Qolsys for the breach of Sections 1, 2, 3 or 12. Therefore, Qolsys will be entitled to temporary injunctive relief against you without the necessity of proving actual damages and without posting bond or other security. Injunctive relief will in no way limit any other remedies Qolsys may have as a result of breach by you of the foregoing Sections or any other provision of this Agreement.
Data Collection and Use
You acknowledge and agree that the Software and/or hardware used in connection
with the Software may collect data resulting from or otherwise relating to
your use of the Software and/or hardware (“Data”) for purposes of providing
you with service/product recommendations, benchmarking, energy monitoring, and
maintenance and Qolsys shall be the exclusive owner of all Data. Qolsys shall
have the right to de-identify your Data so that it does not identify you
directly or by inference (the “De-Identified Data”). Qolsys shall have the
right and ability to use the De-Identified Data for its business purposes,
including improvement of the Software, research, product development, product
improvement and provision of products and services to Qolsys’s other customers
(collectively, “Qolsys’s Business Purposes”. In the event Qolsys does not own
or is unable to own the De-Identified Data as a result of applicable law, or
contractual commitments or obligations, you grant Qolsys a non-exclusive,
perpetual, irrevocable, fully-paid-up, royalty free license to use, copy,
distribute, and otherwise exploit statistical and other data derived from your
use of the De-Identified Data for Qolsys’s Business Purposes.
You may provide suggestions, comments, or other feedback (collectively, “Feedback”) to Qolsys with respect to its products and services, including the Software. Feedback is voluntary and Qolsys is not required to hold it in confidence. Qolsys may use Feedback for any purpose without obligation of any kind. To the extent a license is required under your intellectual property rights to make use of the Feedback, you grant Qolsys an irrevocable, non- exclusive, perpetual, world-wide, royalty-free license to use the Feedback in connection with Qolsys’s business, including enhancement of the Software, and the provision of products and services to Qolsys’s customers.
Government Restrictions
The Software may be subject to additional restrictions and conditions on use
as specified by local, state and or federal laws, rules and regulations. It is
up to you to determine what laws, rules and/or regulations apply to your use
of the Software, and to comply with such laws, rules and/or regulations when
using the Software.
This Agreement will be governed by and construed in accordance with the laws of the State of California, without regard to or application of conflict of laws rules or principles. The United Nations Convention on Contracts for the International Sale of Goods will not apply. You may not assign or transfer this Agreement or any rights granted hereunder, by operation of law or otherwise, without Qolsys’ prior written consent, and any attempt by you to do so, without such consent, will be void. Qolsys has the right to assign this Agreement unconditionally. Except as expressly set forth in this Agreement, the exercise by either party of any of its remedies under this Agreement will be without prejudice to its other remedies under this Agreement or otherwise. The failure by either party to enforce any provision of this Agreement will not constitute a waiver of future enforcement of that or any other provision. If any provision of this Agreement is held to be unenforceable or invalid, that provision will be enforced to the maximum extent possible, and the other provisions will remain in full force and effect. This Agreement is the complete and exclusive understanding and agreement between the parties regarding its subject matter, and supersedes all proposals, understandings or communications between the parties, oral or written, regarding its subject matter, unless you and Qolsys have executed a separate agreement governing use of the Software. Any terms or conditions contained in your purchase order or other communications that are inconsistent with or in addition to the terms and conditions of this Agreement are hereby rejected by Qolsys and will be deemed null.
GOT QUESTIONS?
CONTACT TECH SUPPORT intrusion- support@jci.com
UL/cUL Residential Fire and Burglary and UL/ULC Commercial Burglary Alarm
Control Unit Conforms to ANSI/UL Standards UL985, UL1023, & UL2610 Certified
to ULC Sub. S545 & ULC Std. S304
Doc#: IQ4NS-QG-NA Rev Date: 2302
Qolsys, Inc. proprietary. Reproduction without written consent is not
permitted.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>