nacon RIG600PRO_HS Wireless PlayStation Headset User Guide
- June 13, 2024
- nacon
Table of Contents
600 PRO HS
USER GUIDE
Fit
Snap the left and right earcups into the headband to configure the best fit
and sound.
The headband adjusts to three sizes (small, medium, large) by moving the
earcups.
To remove an earcup, press the earcup post to detach it from the headband.
Setup and basics
Setup PS5
Connect your dongle to the USB-C port of your PS5.
Setup PS4
-
Connect your dongle using a USB-C to USB-A adaptor to the USB port of your PS4.
-
To adjust system audio settings, check your console user guide.
Setup PC
- Connect your dongle to the USB-C port of your PC or laptop.
Attention if you do not have USB-C port on your PC you will need to use a USB-C to USB-Adaptor.
Set up Nintendo Switch
- You can directly connect your dongle to the USB-C port of your console.
- When docked you need to use a USB-C to USB-A adaptor to connect your dongle to your console.
Charging your Headset
Only use the cable provided with the headset and charge the headset directly
from your console or PC.
It takes around 2 hours to fully charge the headset.
Note the following Battery status indications:
Red LED – low battery and is charging
Yellow LED – medium battery and is charging
Green LED – high battery and is charging
LED Off – the battery is fully charged
Power on or off
Press and hold the on/off button for 3s.
Adjust volume
Increase or decrease the volume using the volume dial. When
maximum volume is reached, you will hear a prompt tone indicator.
Mute
The microphone is a flip to “mute” so:
- If the microphone arm is down, it is active,
- If the microphone arm is up, it is muted.
The different wireless modes
Your headset has 3 different modes of communication:
-
USB mode: This mode only communicates with the USB-C dongle. Bluetooth connection is disabled so you will not be disturbed while gaming.
-
Dual mode: This mode has a dual connection with the USB-C Dongle, and a Bluetooth device, at the same time.
Note that if you receive a call then the audio, from the USB-C Dongle, will stop and you will hear the incoming call. -
Bluetooth mode : This mode only communicates with your Bluetooth device.
How to switch modes?
To switch from one mode to another, press the mode button once.
After three single presses the headset mode will be back to the first mode.
To jump over the next mode double press the mode button.
How to pair your headset?
• USB-C Dongle:
If you need to do a new pairing, for any reason, make sure:
- The USB-C Dongle is connected to your console or PC.
- Turn off the Headset.
Press and hold the On/Off button for more than 6s until to hear the Prompt voice: “Pairing USB”. The Headset LED will be flashing Purple during the pairing process.
When pairing is successful you will hear the prompt voice:
- “Connected” in USB mode,
- “USB connected” in Dual mode.
When pairing is unsuccessful you will hear the prompt voice: “USB Pairing
Failed”.
In this case repeat the pairing process again making sure the above conditions
are respected.
• Bluetooth:
To pair your headset with a Bluetooth device, make sure:
- Press and hold the Mode button for more than 6s until to hear the Prompt voice: “Pairing Bluetooth”. Headset LED will be flashing Blue during pairing process.
- Open the `Settings’ menu on your mobile device, go to Bluetooth and turn ON the Bluetooth connection.
Look for RIG 600 PRO, in the list of devices, and connect to it.
If pairing is successful, you will see the message on your device but will also hear a prompt voice, through the headset:
- “Bluetooth connected” in Dual mode,
- “Connected” in Bluetooth mode.
When pairing is unsuccessful you will hear the prompt voice: “Bluetooth
Pairing Failed”.
In this case, turn off your device’s Bluetooth connection, and power off the
headset, and repeat the pairing process again making sure the above conditions
are respected.
WARNING: when in Dual mode you are paired to two devices (USB-C Dongle
and a Bluetooth device) but one communication has the priority over the other.
If you answer an incoming call, for instance, the communication with the USB-C
Dongle will stop and the incoming call will be heard.
When the call is complete, the headset will automatically switch back to the
USB-C Dongle.
Multi-function button
With this button you can, with a single press:
- Play/Pause your music when your communication is activated,
- Answer an incoming call when your Bluetooth communication is activated.
Your headset remembers the latest Bluetooth device connected so once you have set-up your device it will remember it even if you switch between modes or power on/off your headset. With this button you can with, a Long press: (ML> how long is the press?)
- Activate your mobile device’s voice assistant, when connected to Bluetooth,
- Reject a call.
How to customize your experience?
If you want to go deeper into your headset customization, please download the Companion APP RIG 600 PRO from the Google PlayStore (for Android devices) and APP store (for iOs devices).
- The APP will enable you to:
- Customize up to 3 audio profiles quickly, using the Classic mode, or more precisely through the Expert mode:
- Your microphone gain.
- Your microphone monitoring level.
- Activate ear protection which limits the maximum volume of the headset.
- Your equalizer settings (with pre-set configurations).
- Define the default mode when you power on your headset.
- Reduce the prompt tones and voices interaction during headset use.
- Visualize tutorials to know how the APP and headset work.
- Test your headset via a test mode to check that all: buttons, microphone and speakers are working as they should.
- Choose your Prompt voice language (from the 6 supported languages).
- Set the power off timer in case of no communication activities (headset with USB-C Dongle & Bluetooth devices.
- Get important information about your headset and Bluetooth device.
- Get support via the FAQ and from our Customer Service.
Safety
Please read the safety guide for important safety, charging, battery and regulatory information before using your new headset.
WARNING: Risk of explosion if the battery is replaced by an incorrect type.
- Battery cannot be subjected to high or low extreme. temperatures, low air pressure at high altitude during use, storage or transportation.
- Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- The headset and dongle unit shall not be supplied by a power source exceeding 15W (i.e. 5V 3A).
Support
NACON offers a one year Limited (North America, Australia and New Zealand),
two years Limited (EU and UK) and one year Limited (all other countries and
regions) warranty. Please be aware that you may have other rights depending on
the laws of the state or country where the product was purchased. We strongly
advise you to keep your receipt of purchase in order to prove the date of
purchase of this product. For warranty terms and conditions, visit our web
site at www.nacongaming.com
Email: support@nacongaming.com
Compliance
The EIRP power values and the Frequencybands relating to this product,
identified in the list below, comply with the requirements of Directive
2014/53/EU: EIRP: RIG 600 PRO – <13dBm
Frequency band: (2,402 ~ 2,480) GHz
MANUFACTURER
NACON – 396 – 466 Rue de la Voyette, CRT2 – 59273 Fretin, France
DISTRIBUTORS
Bigben Interactive
DEUTSCHLAND GmbH
Walter Gropius Str. 28, 50126
Bergheim, Deutschland
SUPPORT :
UK, support@nacongaming.com
Tel.: +44 08081010970
RIGGAMING.COM
Licensed for sale in the European Union, United Kingdom, Australia, New
Zealand, United States, Canada.
Manufactured by Nacon.
All the trademarks belong to their respective owners.
Documents / Resources
|
nacon RIG600PRO_HS Wireless PlayStation
Headset
[pdf] User Guide
RIG600PRO_HS, RIG600PRO_HS Wireless PlayStation Headset, Wireless PlayStation
Headset, PlayStation Headset, Headset
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>