Power Dynamics PDY210A Active Speaker Instruction Manual

: June 13, 2024
: Power Dynamics

Table of Contents

Power Dynamics PDY210A Active Speaker
Keep the manual for future reference
POWER SUPPLY
CONTROLS AND CONNECTIONS
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Power Dynamics PDY210A Active Speaker

Product Information

Product Name: PDY210A Active Speaker
Power Output: 400W
Reference Number: 178.640
Version: V1.3
Language: English

Product Usage Instructions

Congratulations on your purchase of the PDY210A Active Speaker. Before using the unit, please read this instruction manual thoroughly to fully understand all the features and ensure proper usage.
Follow the instructions provided in this manual to avoid invalidating the warranty.
Take necessary precautions to prevent fire and electrical shock.
Repairs should only be performed by a qualified technician to avoid electrical shock.
Please keep this manual for future reference.
Prior to using the unit for the first time, it is recommended to seek advice from a specialist.
When the unit is initially switched on, a slight smell may occur. This is normal and will dissipate over time.
Do not attempt to open the housing of the unit as it contains voltage carrying parts.
Avoid placing metal objects or liquids inside the unit, as this may cause electrical shock and malfunction.
Avoid placing the unit near heat sources or on vibrating surfaces. Ensure that the ventilation holes are not covered.
The unit is not designed for continuous use and should be used with caution.
Handle the mains lead carefully to prevent damage. A faulty or damaged mains lead can cause electrical shock and malfunction.
Always pull the plug, not the lead, when unplugging the unit from a mains outlet.
Do not plug or unplug the unit with wet hands.
If the plug or mains lead is damaged, it should be replaced by a qualified technician.
If the unit is visibly damaged internally, do not plug it into a mains outlet or switch it on. Contact your dealer for assistance.
Avoid exposing the unit to rain, moisture, and humid environments to prevent fire and shock hazards.
All repairs should be performed by a qualified technician.
Connect the unit to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
During thunderstorms or when the unit will not be used for an extended period, unplug it from the mains.
If the unit has not been used for a long time, allow it to reach room temperature before switching it on to prevent condensation.
Avoid using the unit in humid rooms or outdoors.
Follow applicable guidelines and instructions to prevent accidents in companies.
Avoid repeatedly switching the fixture on and off as it can shorten its lifespan.
Keep the unit out of the reach of children and do not leave it unattended.
Avoid using cleaning sprays on switches as they can cause dust and grease deposits. Consult a specialist in case of malfunction.
Do not force the controls on the unit.
If this unit has a built-in lead-acid rechargeable battery, recharge it every 3 months if not in use for a long period to prevent permanent damage.
If the battery is damaged, please replace it with the same type.

Congratulations on the purchase of this Power Dynamics product.
Please read this manual thoroughly prior to using the unit in order to benefit fully from all features. Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.

Keep the manual for future reference

Prior to using the unit, please ask for advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The unit contains voltage-carrying parts. Therefore do NOT open the housing.
Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
The unit is not suitable for continuous use.
Be careful with the mains lead and do not damage it. A
Faulty or damaged mains lead can cause electrical shock and malfunction.
When unplugging the unit from a mains outlet, always Pull the plug, never the lead.
Do not plug or unplug the unit with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet, and DO NOT switch the unit on. Contact your dealer.
To avoid fire and shock hazards, do not expose the unit to rain and moisture.
All repairs should be carried out by a qualified technician only.
Connect the unit to an earthed mains outlet (220- 240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is to unplug it from the mains when not in use.
If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on.
Never use the unit in humid rooms or outdoors.
To prevent accidents in companies, you must follow the applicable guidelines and follow the instructions.
Do not repeatedly switch the fixture on and off. This shortens the lifetime.
Keep the unit out of the reach of children. Do not leave the unit unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Do not force the controls.
This unit is with a speaker inside which can cause a magnetic field. Keep this unit at least 60cm away from the computer or TV.
If this product has a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time.
Otherwise, the battery may be permanently damaged.
If the battery is damaged please replace it with the same specifications battery. And dispose of the damaged battery environment-friendly.
If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise, serious damage and/or dangerous radiation may occur.
Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
Make sure that the main lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240Vac/50Hz. Check if the power outlet matches. If you travel, make sure that the mains voltage of the country is suitable for this unit.
Keep the original packing material so that you can transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard. This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to. The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F. Electric products must not be put into household waste. Please bring them to a recycling center. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice. Do not attempt to make any repairs yourself. This would invalidate your warranty. Do not make any changes to the unit. This would also invalidate your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be returned, it is important that the product is returned in the original factory box and packaging. If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The rising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWER SUPPLY

The label on the back/underside of the product indicates the mains voltage to which it must be connected. Check that the mains voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used. Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate electrical ground to avoid the risk of electrocution or fire.

CONTROLS AND CONNECTIONS

CHANNEL 1 OUTPUT LEVEL CONTROL: Adjust the volume of channel 1.
MIC–LINE SWITCH: Switch between the microphone and line channel.
COMBO JACK INPUT: Combo jack entry, suitable for both XLR and 6.3mm jack.
CHANNEL 2 OUTPUT LEVEL CONTROL: Adjust the volume of channel 2.
MASTER OUTPUT LEVEL: Adjust the overall output level.
XLR MIX OUTPUT: XLR output for channels 1 and 2.
RCA LINE INPUT: RCA input for connecting audio units with line-level output (e.g. mixer, CD player).
POWER CONNECTOR B: Socket for plugging in the supplied power cord.
FUSE HOLDER: For instructions on how to replace the fuse, please see the chapter “REPLACING THE FUSE”.
POWER SWITCH: Switch to turn the device ON or OFF.

REPLACING THE FUSE

If the fuse is defective, replace the fuse with a fuse of the same type and value. Before replacing the fuse, unplug the main lead.
Procedure
Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
Step 4: Replace the fuse holder in the housing.

TECHNICAL SPECIFICATION

Input connections: 6.3mm jack, RCA, XLR (3-pin)
Output connections: XLR (3-pin)
Output power: max: 400W
Output power: RMS: 200W
Amplifier type: Class AB
Diameter tweeter: 1.35”
Diameter woofer: 10”
Magnet type : Ferrite
Magnet weight: 40 oz
Voice coil: 2”
Frequency response: 60Hz – 20kHz
Impedance: 4ohm
SPL max: 125dB
Dimensions : 300 x 325 x 500mm
Weight (kg): 13,50

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice. The products referred to in this manual conform to the European Community Directives to which they are subject:

European Union United Kingdom
Tronios B.V., Bedrijvenpark Twente Noord 18, 7602KR Almelo, The Netherlands
Tronios Ltd., 130 Harley Street, London W1G 7JU, United Kingdom
2014/35/EU S.I. 2016:1101
2014/30/EU S.I. 2016:1091
2011/65/EC S.I. 2012:3032
2014/53/EU S.I. 2017:1206

Specifications and design are subject to change without prior notice. www.tronios.com
Copyright © 2023 by Tronios The Netherlands