behringer NOX101 Premium 2-Channel DJ Mixer User Guide
- June 13, 2024
- Behringer
Table of Contents
behringer NOX101 Premium 2-Channel DJ Mixer
Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK! DO NOT OPEN!
- Terminals marked with this symbol carry an electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installations or modifications should be performed only by qualified personnel.
- This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
- This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
Caution
- To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user-serviceable parts inside. Refer servicing to qualified personnel.
Caution
- To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Caution
- These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Use only attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
- Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
- Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
- Do not install in a confined space, such as a bookcase or similar unit.
- Do not place naked flame sources, such as lighted candles, on the apparatus.
- Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
- This apparatus may be used in tropical and moderate climates up to 45°C.
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2023 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at community.musictribe.com/pages/support#warranty.
PRO MIXER NOX101 Hook–up
Step 1: Hook–Up
- Studio session
- Live DJ set
PRO MIXER NOX101 Controls
Step 2: Controls
- PEAK LED lights when the microphone input signal clips. If this happens, lower the MIC GAIN knob.
- MIC GAIN knob adjusts the sensitivity of the microphone input.
- HIGH and LOW knobs adjust the microphone EQ.
- CURVE switch selects how gradually the channel fader raises the volume, from an even taper across the faders travel, to a steep jump near the top of the fader track.
- CHANNEL FADER adjusts the channel’s volume.
- CHANNEL EQ knobs adjust the HIGH, MID, and LOW frequencies of the channel.
- POWER LED lights when the mixer is powered on.
- METER button selects whether the VU METERS display the main or PFL signal level.
- REV LED lights when the REV button is engaged.
- CHANNEL GAIN knob adjusts the sensitivity of the channel inputs.
- MASTER knob adjusts the output of the MAIN OUTPUTS.
- MIC LEVEL knob adjusts the microphone volume.
- CUE GAIN knob adjusts the level of the cue (headphone) signal.
- VU METER displays the main stereo signal when the METER button is set to MAIN, and displays the channel 1 and 2 signals when set to PFL.
- CUE FADER blends the content of the cue signal between channel 1 and channel 2 for headphone monitoring.
- PHONO/LINE switch selects either the PHONO or LINE inputs as the channel’s audio source.
- CROSSFADER fades between channel 1 and channel 2.
- XFADE CURVE knob determines how steep or gradual the fade between channel 1 and 2 is.
- REV button switches the position of channel 1 and 2 on the CROSSFADER.
- PHONE/LINE button optimizes the PHONO inputs for use with a turntable or line-level source.
- POWER switch turns the power on and off.
PRO MIXER NOX101 Getting started
Step 3: Getting started
- Make all the necessary audio and power connections to the mixer. Leave the power for all devices off!
- Lower the MASTER and CUE GAIN knobs all the way down.
- Turn the power on for all other devices.
- Flip the POWER switch on.
- Start playing audio from your sources (turntable, CD player).
- Raise the MASTER knob up half way to start. You may adjust it as you set channel levels.
- Turn the CUE GAIN knob up of the way to start. You may adjust it to desired level as you begin setting channel levels.
- Move the CROSSFADER to the left and turn the channel 1 GAIN knob up half way.
- Raise the channel 1 volume fader up ¾ of the way.
- With the METER button in the UP (MAIN) position, adjust the channel 1 GAIN so that the orange LEDs in the VU METER light.
- Lower the channel 1 fader all the way and move the CROSSFADER all the way to the right.
- Turn the channel 2 GAIN knob up half way.
- Raise the channel 2 fader up ¾ of the way.
- Adjust the channel 2 GAIN knob so that the orange LEDs in the VU METER light.
- Raise the channel 1 fader back to the ¾ position.
- Use the CROSSFADER to blend channels 1 and 2.
Specifications
Audio Inputs
- Mic in: 45 dB gain, TRS, electronically balanced
- Phono in: 35 dB gain, RCA, unbalanced
- Line in: 0 dB gain, RCA, unbalanced
Audio Outputs
- Main out (¼”): 18 dBu max TRS, balanced
- Main out (RCA): 18 dBu max, RCA, unbalanced
- Phones out: max. 566 mW @ 1 kHz into 75 Ω
Crossfader
- Type: ULTRAGLIDE VCA Crossfader
Equalizer
- Stereo low: +6 / -25 dB @ 50 Hz
- Stereo mid: +6 / -30 dB @ 1.2 kHz
- Stereo high: +6 / -15 dB @ 10 kHz
- Mic low: ±12 dB @ 50 Hz
- Mic high: ±12 dB @ 12 kHz
System Specifications
- Signal-to-noise ratio: >89 dB
- Crosstalk: >81 dB
- Distortion (THD): <0.04% @ 1 kHz
- Frequency response: 10 Hz – 90 kHz (+0 / -3 dB)
Power Supply
- External power adapter: 12 V DC 1000 mA
- Power consumption: 8 W max
Dimensions/Weight
- Dimensions (H x W x D): 100 x 255 x 274 mm (3.9 x 10.1 x 10.8″)
- Weight: 2.1 kg (4.6 lbs)
Other important information
Important information
Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
- Behringer
- PRO MIXER NOX101
- Responsible Party Name: Music Tribe Commercial NV Inc.
- Address: 122 E. 42nd St.1,
- 8th Floor NY, NY 10168,
- United States
- Email Address: legal@musictribe.com
PRO MIXER NOX101
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Important information
Changes or modifications to the equipment not expressly approved by Music
Tribe can void the user’s authority to use the equipment.
- Hereby, Music Tribe declares that this product is in compliance with Directive 2014/35/
- EU, Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU,
- Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
- Full text of EU DoC is available at https://community.musictribe.com/
- EU Representative: Music Tribe Brands DK A/S
- Address: Gammel Strand 44, DK-1202 København K, Denmark
- UK Representative: Music Tribe Brands UK Ltd.
- Address: 8th Floor, 20 Farringdon Street London EC4A 4AB, United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>