Lithoss Ar7861301 ARPI IP66 Designed Switches Instruction Manual
- June 13, 2024
- Lithoss
Table of Contents
Lithoss Ar7861301 ARPI IP66 Designed Switches
Product Information
- Name: ARPI IP66
- Parts: Ref 100 mm, Ar 7 86 XX 01, 110 mm, 100 mm
- Product IP: IP66
- Shape: Square (see separate manual), Round, Square UK (see separate manual)
- Color: Stainless Steel, Gunpowder Black, Brushed Brass, Brushed Bronze, Brushed Black, Polished Stainless Steel, Polished Brass
- Specifications: IP closed, IP open, Temp. instal., Max. temp
- Installation equipment: M20, M16, 2x M16
Product Usage Instructions
- Pre-installation:
- Use a PZ1 or Torx (T10) screwdriver to install the product.
- Refer to the catalog for all available modules.
- Post-installation:
- Important: After installation, do not cover up the ground socket with plastic or other building materials.
- Covering up the unit can create condensation fluid in certain conditions, leading to corrosion of the cover plate.
Note: For any further assistance or customer service, please contact
Lithoss at info@lithoss.com or visit their website
at www.lithoss.com.
You can also reach them at Tel ++32(0)56 48 15 98.
Dimension
Specifications
EXAMPLE CODE Ar7861301: Floor socket UK IP66 – 2P+T with safety – Stainless Steel
| Product | Code |
|---|---|
| Arpi | Ar |
| IP | Code |
| IP66 | 7 |
| Shape | Code |
| Square (see separate manual) | 16 |
| Round | 26 |
| Square UK (see separate manual) | 86 |
| Module | Code |
| See cataloog for all modules | XX |
| Color | Code |
| Stainless Steel | 01 |
| Gunpowder Black | 03 |
| Brushed Brass | 06 |
| Brushed Bronze | 17 |
| Brushed Black | 18 |
| Polished Stainless Steel | 22 |
| Polished Brass | 23 |
| IP closed | IP66 |
| IP open | IP20 |
| Temp. instal. | -30° C / +60°C |
| Max. temp | +120° C |
Installation and maintenance instructions associated to the manufacturer’s warranty
- The installation, connection and testing of this device should always be performed by a recognized electrician / installer.
- This device needs to be installed, connected and tested according to the official national instruction guide for electrical installations.
- This technical manual is to be considered as an additional term to the general sales conditions of Lithoss nv/sa.
- The installer is responsible for the use of compatible products which meet the CE and IC rules.
- Clean the device only with a soft and slightly wet piece of cloth without any detergent.
- Always switch off the electricity BEFORE installation!
Parts
Installation Instructions
Installation equipment
Pre-installation
Warning
Post-installation
DO NOT COVER UP
- After installation do not cover up the groundsocket with plastic or other building materials. Covering up the unit can in some conditions create condensation fluid which could result in corrosion of the coverplate.
Installation Instructions
CUSTOMER SERVICE
- Moortelmeers 23, B-8740 PITTEM – BELGIUM
- info@lithoss.com
- www.lithoss.com
- ++32(0)56481598
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>