SPEN-HP-05 Tilt Pen Instruction Manual
- June 13, 2024
- HP
Table of Contents
Tilt Pen
SPEN-HP-05 Tilt Pen
Color Side 1 : BLACK
Color Side 2 : BLACK
Flat size : 20.07 x 9.31 in.
(509.778 x 236.474 mm)
Finished size : 6.69 x 1.33 in.
(169.926 x 33.782 mm)
Fold 1 :
3-panel accordion Fold 2 :
7-panel accordion
*Charge the pen using either your computer AC
adapter or other USB Type-C® charging cable or adapter (sold separately).
The pen needs to be fully charged before the first use.
| Light status| Pen status
---|---|---
Solid amber| Charging
Solid white| Fully charged
Blinking amber| Low battery
![SPEN HP 05 Tilt Pen
- Parts 4](https://manuals.plus/wp-content/uploads/2023/09/SPEN-HP-05-Tilt-
Pen-Parts-4.png)By default, press button 1 to select an item or perform a
right-click function, and press button 2 to erase.
Depending on the application, these button functions might vary. To view or edit the configuration of these buttons, use either the HP Pen Control app or a pen control app (depending on OS) on your computer.
For regulatory, certification, and environmental information,including Restriction of Hazardous Substances (RoHS), scan the QR code, or go to www.hp.com/go/regulatory.
Specifications
Temperature, operating 0°C to 40°C (32°F to 104°F)
Relative humidity (noncondensing), operating 10% to 90%
Regulatory information
For regulatory identification purposes, your product is HSA-W001P. If required, regulatory markings for your country or region are located on the side of the product, on the packaging, or elsewhere in this document.
RMN : TPA-M005P and SPEN-HP-05
© Copyright 2022 HP Development Company, L.P.
USB Type-C® is a registered trademark of USB Implementers Forum.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be
construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
First Edition: December 2022
PRINTER: Replace this box with Printed- In (PI) Statement(s) as per spec.
NOTE: This box is simply a placeholder. PI Statement(s) do not have to
fit inside the box but should be placed in this area.
Security Information
To ensure the best performance of the equipment and avoid dangerous or illegal conditions, pl ease read and follow the following safety information.
- Please use the battery approved by the device manufacturer and supplied with this model.
- The equipment should be stored in clean, cool and dry room, should avoid direct sunlight, avoid contact with corrosive substances.
- If the battery leakage, do not let the skin or eye contact to the leakage of liquid. If inadvertent c ontact, please rinse with clean water immediately, and go to the hospital for medical tre atment.
- If a battery is in use, charging or preservation process have discoloration, deformation, a bnormal heating and other anomalies, please stop using and replace the new battery.
- The provisions of this equipment, please handle the battery and other accessories according to local, cannot use them as garbage disposal. If the battery is not handled properly, it may caus e the battery to explode.
- Do not use the equipment in the gray, damp, dirty place, in order to avoid circuit faults caused by internal equipment.
- Do not let children or pets biting equipment or accessories, lest cause damage or lead to e quipment failure.
- The equipment and accessories contain small parts, please send the equipment and accessories in the reach of infants. Infants may unintentionally swallow small parts and cause as phyxiation or other dangers.
- Please keep the drying equipment and accessories. Do not use a microwave oven or a blower and other external heating equipment to dry it.
- Please do not make the equipment and accessories are falling, extrusion or a strong impact, so as not to damage the equipment and accessories, lead to equipment failure.
- Do not use harsh chemicals, cleaning agent or detergent cleaning equipment or accessories.
- Please use a clean, dry soft cloth to wipe the equipment or its accessories.
- Do not disassemble or refit equipment and accessories, otherwise the equipment and accessories will not be in the scope of free warranty, equipment failure please contact an authorized service center.
Warranty Card
Warranty Service
- The product comes with a warranty against defect in materials and workmanship under normal use for a term of 12 months beginning from the date of delivery of the produact.2.
This warranty dose not apply and the authorized service center will charge the repair reasonably if the customer or accessory is:
i. damaged by Man-made;
ii. no warranty card and valid invoice, or the warranty period has been
exceeded;
iii. the warranty card does not match the product model designation, or has
been altered;
iv. damaged by failure to use, maintained product as instructions;
v. disassembly and repair of products without authorize , or immersion in
water or damage to products;
vi.other force majeure such as earthquakes, floods, etc.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution:
Any Changes or modifications not expressly approved by the part responsible
for compliance could void the user’s authority to operate the equipment.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can b
e determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.”
IC statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
RF Radiation Exposure
This equipment complies with FCC & Industry Canada exposure limits set forth
for an uncontrolled environment. This transmitter must not be co-located
operating in conjunction with any other antenna or transmitter.
NB_OPT_SIP_Avicii_Cons_N35884-B21_v2.indd 2
Documents / Resources
| hp
SPEN-HP-05 Tilt
Pen
[pdf] Instruction Manual
2ABWESPEN-HP-05, 2ABWESPENHP05, SPEN-HP-05, SPEN-HP-05 Tilt Pen, Tilt Pen, Pen
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>