AiYCHEN Electric Griddle Instruction Manual

AiYCHEN Electric Griddle

NOTE:
To continuously improve its products, AIYCHEN reserves the right to modify this information without prior notification. For any questions during assembly, please watch the video in the product page for reference.
Or contact our customer service with any questions, comments, or concerns. Thank you for using AIYCHEN products in your home!

AIYCHEN mainly produces and sells products such as electric fryers, toaster ovens, pizza ovens, steak ovens, gas combination boilers, burger machines, noodle machines, heat preservation cabinets, toaster ovens, kitchen work tables, kitchen carts, etc.; the products are fashionable, energy-saving and technologically advanced, and are suitable for various hotels, Chinese and Western restaurants, bars, etc.

READ THIS MANUAL INSTRUCTION CAREFULLY BEFORE USING THE UNIT. PLEASE KEEP THIS FOR FUTURE REFERENCE.

Receiving And Checking

Thank you for selecting our electric griddle.
In order to protect your legitimate rights and interests, please pay attention to the following things when receiving and checking the machine:

1. The outer packing of the machine is intact.
2. Machine’s model is consistent with your purchased.
3. The appearance of the machine is in good condition.
4. The attached parts are complete.
5. The internal components of the machine are in good condition.

Introduction

This CONTACT GRILL is the latest design electric heating product. All electrical components of this product are supplied by reliable manufacturers to ensure quality and a high level of safety and low energy consumption. In addition, the machine has a thermostat function that allows easy operation. This machine is fully functional and of high quality, suitable for supermarkets, bars, western restaurants and fast food restaurants adopted.

Product Specifications

OPERATING INSTRUCTIONS

Before operation, check that your mains voltage corresponds to that stated on the appliance. Place this unit on a dry, level surface. No combustible or explosive objects can be placed in its vicinity. The operation space must have good ventilation, with the ambient temperature not higher than 122℉（50℃）.

1. Place the Cone Baker horizontally on a firm workbench. Check if the power plug is properly connected.
2. Turn the power switch to “O” (OFF), and the temperature controller knob to “OFF”.
3. Turn the power switch to “I” (ON), the power will supply to the unit.
4. Adjust the temperature controller knob to 482℉（250℃）. The red lamp will light indicating the electro-thermal pipes are supplied with power and are starting to heat.
5. When the temperature reaches to 482℉（250℃）, the temperature controller will automatically disconnect the power supply and the yellow indicator lamp will go out, indicating the electro-thermal pipes stop heating.
6. When the temperature drops a little , the temperature controller will automatically re-connect to power supply and the red lamp will light, indicating the electro-thermal are starting to heat again. This process will repeat over and over again. Maintaining the temperature within the preset range.
7. When the temperature reaches to 482℉（250℃）, film the baking plate with some seed fat, put the paste in the baking plate, put down the upper cover, set the time of the calculagraph. The time range is 0-5 minutes.
8. When the operation is completed, turn the temperature controller knob to “OFF”, and the power switch to “O”. Disconnect the power supply to ensure safety.

REPAIRS AND MAINTENANCE

Always unplug the unit and let it completely cool down before cleaning. It shall be cleaned with a soft and dry piece of cloth, or with neutral detergent when necessary. Avoid scratching the surface of the unit with sharp metal. The unit shall not be cleaned with a water jet or be immersed in water for cleaning. If the unit will not be used for long period of time, it must be cleaned and stored in a place with good ventilation and without corrosive gas. When temporary storage is

ELECTRIC GRIDDLE
needed, proper rainproof measures shall be taken.

Warranty and Service

If any problems occur, please contact the AIYCHEN customer service center via the contact information listed in this User Guide.
We can only provide after sales service for products that are sold by AIYCHEN or AIYCHEN authorized retailers and distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty issues.
If you have any questions, please contact us at support@doketech.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>