COVID ACDA-120 Digital to Analog Audio Decoder User Manual
- June 13, 2024
- COVID
Table of Contents
COVID ACDA-120 Digital to Analog Audio Decoder
Product Information
User Manual
Ver 1.3
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
Surge protection device recommended:
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.
Table of Contents
- Introduction
- Features
- Specifications
- Package Contents
- Panel Descriptions
- Connection Diagram
Introduction
The Digital to Analog Audio Decoder features an integrated 24 bit audio
DSP. This unit can decode a variety of digital audio formats, including Dolby
Digital (AC3), DTS and PCM. It can simply connect an Optical (Toslink) or
Digital Coaxial Cable to the input, then the decoded audio can be transmitted
as 2 channel analog audio via the Stereo RCA output or the 3.5mm output
(suitable for headphones) simultaneously.
Manufactured under license from Dolby Laboratories. Dolby and the double-D Symbol are trademarks of Dolby Laboratories.
Features
- Decode Dolby Digital (AC3), DTS or PCM digital audio to stereo audio output.
- Support PCM 32KHz, 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz sample frequency audio decode.
- Support Dolby Digital 5.1 channels, DTS-ES6.1 channels audio decode.
- No need to install drivers. Portable, flexible, plug and play.
Specifications
- Input Ports: 1 x Optical (Toslink), 1 x Digital Coaxial
- Output Ports: 1 x RCA (L/R), 1 x 3.5mm (Headphone)
- Signal to Noise Ratio: 103db
- Degree of Separation: 95db
- Frequency Response: (20Hz ~ 20KHz) +/- 0.5db
- Dimensions: 72mm(D) x 55mm(W) x 20mm(H)
- Weight: 40g
Package Contents
- Audio Decoder – 1PC
- 5V/1A DC Adaptor – 1PC
- User Manual – 1PC
Panel Descriptions
Please study the panel drawings below and be familiar with the signal
input(s), output(s), and power requirements.
Connection Diagram
- Connect a source (e.g. Blu-Ray Player, game console, A/V Receiver, etc.) to the audio Decoder’s SPDIF input port by fiber cable or Coaxial input port by coaxial cable.
- Connect a headphone or analog audio amplifier to the audio output port on the Decoder.
- Power on the Decoder and select the switch to your need audio input port.
- LED Status Indicator:
- Red always: PCM decoder or No signal
- Red blinking: Dolby decoder
- Green blinking: DTS decoder
User Manual
Ver 1.3
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this
manual for future reference. Surge protection device recommended.
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Introduction
The Digital to Analog Audio Decoder features an integrated 24 bit audio DSP.
This unit can decode a variety of digital audio formats, including Dolby
Digital (AC3), DTS and PCM. It can simply connect an Optical (Toslink) or
Digital Coaxial Cable to the input, then the decoded audio can be transmitted
as 2 channel analog audio via the Stereo RCA output or the 3.5mm output
(suitable for headphones) simultaneously.
Manufactured under license from Dolby Laboratories. Dolby and the double-D
Symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from
DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol together, and
Digital Surround are registered trademarks or trademarks of DTS, Inc. in the
United States and/or other countries. © DTS, Inc. All Rights Reserved.
Features
Decode Dolby Digital (AC3), DTS or PCM digital audio to stereo audio output.
Support PCM 32KHz.44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz sample
frequency audio decode.
Support Dolby Digital 5.1 channels, DTS-ES6.1 channels audio decode. No need
to install drivers. Portable, flexible, plug and play.
Specifications
- Input Ports: 1 x Optical (Toslink), 1 x Digital Coaxial
- Output Ports: 1 x RCA (L/R), 1 x 3.5mm (Headphone)
- Signal to Noise Ratio: 103db
- Degree of Separation: 95db
- Frequency Response: (20Hz ~ 20KHz) +/- 0.5db
- Dimensions: 72mm(D)x55mm(W)x20mm(H).
- Weight: 40g
Package Contents
Before using this unit, please check the packaging and make sure the following items are contained in the shipping carton:
- Audio Decoder —————1PC
- 5V/1A DC Adaptor———————-1PC
- User Manual ——————-1PC
Panel Descriptions
Please study the panel drawings below and be familiar with the signal input(s), output(s) and power requirements.
Connection Diagram
- Connect a source (e.g. Blu-Ray Player, game console, A/V Receiver, etc.) to the audio Decoder’s SPDIF input port by fiber cable or Coaxial input port by coaxial cable.
- Connect a headphone or analog audio amplifier to the audio output port on the Decoder.
- Power on the Decoder and select the switch to your need audio input port.
- LED Status Indicator
- Red always: PCM decoder or No signal
- Red blinking: Dolby decoder
- Green blinking: DTS decoder
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>