COVID ACDA-100 Digital to Analog Audio Converter User Manual
- June 13, 2024
- COVID
Table of Contents
COVID ACDA-100 Digital to Analog Audio Converter
Product Information
Product Name: Digital to Analog Audio Converter
Version: 1.2
Features:
- Converts Coaxial or Toslink digital audio signals to analog L/R audio
- Supports sampling rate at 32KHz, 44.1KHz, 48KHz, and 96KHz
- 24-bit SPDIF incoming bit stream on left and right channels
- Provides electromagnetic-noise-free transmission
- Easy to install and simple to operate
Specifications:
- Input Audio: Coaxial or Toslink digital audio
- Input Audio Connector: Toslink, 1 RCA (Coaxial)
- Output Audio: L/R audio and 3.5mm
- Output Audio Connector: 2 RCA (R/L) + Headphone
- Sampling Rate: 32KHz, 44.1KHz, 48KHz, and 96KHz
- Dimensions: 72mm(D)x55mm(W)x20mm(H)
- Weight: 78g
- External Power Supply: 5V/1A DC
- Max Power Consumption: 0.5 watts
Product Usage Instructions
Step 1: Check the package contents and ensure that the following items are included:
- Main unit (Digital to Analog Audio Converter)
- DC 5V Power Supply
- User’s Manual
Step 2: Familiarize yourself with the panel descriptions provided in the
user manual to understand the signal input(s), output(s), and power
requirements.
Step 3: Connect the Digital to Analog Audio Converter to your audio setup
following the steps below:
- Identify the digital audio source you want to convert (Coaxial or Toslink).
- If using a Coaxial connection, connect the Coaxial input audio connector to the digital audio source using an RCA cable.
- If using a Toslink connection, connect the Toslink input audio connector to the digital audio source using a Toslink cable.
- Connect the L/R audio output connector of the converter to an external device (e.g., an amplifier) using standard RCA-style jacks.
- If desired, connect headphones to the headphone output connector for private listening.
- Plug the provided DC 5V power supply into the converter and connect it to a power source.
Note: It is recommended to use surge protection systems to safeguard the sensitive electrical components of the product from electrical spikes, surges, electric shock, and lightning strikes. This will help protect and extend the life of your equipment.
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shock, lighting strikes, etc. Use of
surge protection systems is highly recommended in order to prote ct and extend
the life of your equipment.
Introduction
The Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink digital audio signals to analog L/R audio and is available for connection to an external device such as an amplifier via standard RCA-style jacks. This Converter is small in size and quite easy to install.
Features
This Converter has many features that enable it to perform in a superior manner. Among those features you will find:
- Converts Coaxial or Toslink digital audio signals to analog L/R audio.
- Supports sampling rate at 32KHz, 44.1KHz, 48KHz, and 96KHz.
- 24-bit SPDIF incoming bit stream on left and right channels.
- Provides electromagnetic-noise-free transmission.
- Easy to install and simple to operate.
Specifications
- Input Audio: Coaxial or Toslink digital audio
- Input Audio Connector: Toslink, 1 RCA (Coaxial)
- Output Audio: L/R audio and 3.5mm
- Output Audio Connector: 2 RCA (R/L) + Headphone
- Sampling Rate: 32KHz, 44.1KHz, 48KHz, and 96KHz
- Dimensions : 72mm(D)x55mm(W)x20mm(H)
- Weight : 78g
- External Power Supply: 5V/1A DC
- Max Power Consumption : 0.5 watts
Package Contents
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
- Main unit (Digital to Analog Audio Converter)
- DC 5V Power Supply
- User’s Manual
Panel Descriptions
Please study the panel drawings below and become familiar with the signal input(s), output(s), and power requirements.
Connection and Operation
Before installation, please make sure all devices you wish to connect have been turned off.
- Connect the audio source device to the Converter using appropriate Toslink or Coaxial cables.
- Connect the AV Receivers or Amplifiers to the Converter using the appropriate L/R cable.
- Insert the DC side of the 5v power supply into the converter and then connect the AC side of the power supply to the wall outlet.
Note : When connected to the Toslink and Coaxial cables simultaneously, the product will give priority to the Toslink input.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>