Pace International

Pace International DN006349 Ihip Swipe Bluetooth Headphones

Specifications

• BRAND : Pace International
• MODEL : DN006349
• FORM FACTOR : In Ear
• CONNECTIVITY TECHNOLOGY : Wireless
• WIRELESS COMMUNICATION TECHNOLOGY : Bluetooth
• MODEL : ‎DN006349
• ITEM WEIGHT : ‎1.65 pounds
• PRODUCT DIMENSIONS : ‎6.75 x 4 x 9.25 inches
• SPECIAL FEATURES: ‎Microphone

Introduction

Pace distributes content via video, internet, and cellular devices as a telecom company, enabling customers to keep up with their enjoyment.

HOW TO SETUP

Pull down the phone’s top shade on an Android device, then long-press the Bluetooth icon. It will immediately take you to the Bluetooth menu, where you may enable it and then start looking for devices. To link a pair of headphones, tap their name.

HOW TO CONNECT

• Your device’s Bluetooth should be turned on.
• To turn on SoundPods, long-press the multi-function button for three seconds.
• To connect, select “SoundPods” from your list.
• The earbuds are correctly linked when the blue LED indicators slowly flash.

HOW TO CONNECT TO IPHONE

• Turn on Bluetooth by going to Settings > Bluetooth on your device.
• Wait for your item to show up on your device after putting it in discovery mode.
• When the name of your attachment displays on the screen, tap it to pair.

HOW TO PAIR

• Turn on the “ON” setting for the Bluetooth function.
• Bluetooth pairing: When in Bluetooth mode, the headset will proactively look for compatible Bluetooth devices, and the indicator light will flash blue and red.
• A slow blue light flash indicates a successful Bluetooth connection.

HOW TO FIX BLUETOOTH PAIRING PROBLEMS

• Restart Bluetooth after turning it off. Learn how to activate and deactivate Bluetooth.
• Verify that your gadgets are connected and linked. Discover Bluetooth pairing and connection techniques.
• Restart your electronics. Find out how to restart your Pixel or Nexus phone.

HOW TO FIX HEADPHONES THAT WON’T TURN ON

• Ensure that Bluetooth is enabled on your device.
• Remove all devices that are paired with your headset.
• Restart your laptop or smartphone.
• Recover your headset by erasing it from your device.
• Ensure that your device and headphones are in close proximity.
• Charge both your smartphone and your headset.

HOW TO RESET

1. The first step is to select the Advanced drop-down menu under Settings -> System.
2. Choose Reset settings and then click Reset Bluetooth, Wi-Fi, and Mobile.
3. When prompted, enter the PIN for your phone by tapping the Reset settings option below.

Frequently Asked Questions

Why won’t my phone and Bluetooth headphones pair?

If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.

How can I make a Bluetooth device link by force?

You must locate your speaker after selecting Bluetooth in the settings menu (there should be a list of devices you have connected previously). Hold down the Bluetooth key at the top until it starts up, then turn it on if you want to connect.

Why is my phone having trouble identifying my headphones?

Tap Connected devices > Connection options > Bluetooth after opening Settings. Unpair any Bluetooth audio devices that are already paired with your phone or turn the Bluetooth switch to Off. To test whether your headphones are functional, plug them into the audio jack and play something.

Why is it that my iPhone cannot discover Bluetooth devices?

Ensure that your iOS or iPadOS device and Bluetooth accessories are in close proximity to one another. Restart your Bluetooth device after turning it off. Make sure your Bluetooth accessory is turned on, fully charged, and plugged in. Check to check if your attachment needs new batteries if it does.

Why won’t my Bluetooth activate?

Verify that aeroplane mode is not engaged: Select Settings > Network & Internet > Airplane mode after choosing Start. Ensure that Airplane mode is off. Change the Bluetooth’s status: Select Settings > Devices > Bluetooth & other devices from the Start menu. Turn Bluetooth off, wait a short while, then restart it.

Why won’t my wireless earbuds switch on?

If the headphones’ power won’t turn on, the battery might not be installed properly or could need to be changed. To fix this problem, make sure you look through the following things. Important: Consult the product’s instructions if you require model-specific details to accomplish any of the tasks.

Why won’t my headphones pair with my phone?

You might need to reset your headphones or speakers to erase all of the pairings so you can start over if you’re having difficulties matching speakers or headphones that have been attached to numerous devices in the past. Find the manufacturer’s instructions for your individual model by searching “reset” and the name of your device.

Does every Bluetooth headphone model support the iPhone?

Although these chips make it much easier for headphones to link with your several Apple devices, they are not necessary; any Bluetooth headphones will function. While going wireless with an iPhone is not required, it is significantly simpler because newer models no longer have a headphone jack and require a dongle.

Why do earbuds sometimes stop working entirely?

The most common reasons why earphones and earbuds quit working are cable tension, incorrect wiring from the manufacturer, moisture damage, and damage to the sound drivers. These incidents could result in audio shorts or a total disconnect between the drivers and the audio source.

How can my Bluetooth pairing code be reset?

To choose the device you wish to unpair, use the directional keys on your phone. The context menu contains a number of options. Click on “Delete/reset PIN.” By doing this, the security code will be reset to its default value, which is often “0000.”

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>