Extech BR90 Compact Borescope User Manual

: June 13, 2024
: EXTECH

Table of Contents

Extech BR90 Compact Borescope
Product Information
Product Usage Instructions
INTRODUCTION
PRODUCT DESCRIPTION
OPERATION
SPECIFICATIONS
USER MANUAL
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Extech BR90 Compact Borescope

Product Information

The Extech BR90 Compact Borescope is a portable device that provides real-time video monitoring. It is designed for inspecting the interior of pipelines, conduits, and other narrow spaces. The BR90 is useful for various applications such as appliance installation, electronic equipment inspection, fixture installation, vehicle troubleshooting, and maintenance.

Features

Real-time video monitoring
Ideal for inspecting narrow spaces
Useful for various applications
Portable and compact design
Battery-powered (requires four 1.5V AA batteries)
Camera cable storage within the device
Adjustable LED brightness for camera and monitor
Zoom function for camera image
Video output port for external monitor viewing

Please visit the Extech website for additional information, including the latest version of the User Manual and Customer Support.

Product Usage Instructions

Battery Installation
To power the BR90, follow these steps

Open the rear battery compartment using the provided latches.
Insert four 1.5V AA batteries, ensuring correct polarity.
Close the battery compartment securely.
The battery status indicator will appear on the upper left corner of the video monitor.

Powering the BR90
To turn the BR90 ON or OFF, long press the Power ON/OFF button located at the top right of the device.

Accessing the Camera Cable
The camera cable is stored within the BR90 housing. To access the cable, follow these steps

Press the two compartment tabs to open the housing.
Pull out the required length of cable.
Snap the housing shut.

To store the cable after use, open the housing, coil the cable inside, and snap the housing closed.

Accessory Installation
To install accessories (hook, mirror, magnet), follow these steps

Insert the desired accessory into the hole on the camera lens as indicated in the diagram.
Push the attachment fixture to secure it.

Camera LED Brightness Adjust
When inspecting poorly lit areas, use the LED Brightness Adjust button located at the middle right of the device to adjust the LED brightness level. Short presses will cycle through the available brightness levels.

Monitor Brightness Adjust
To adjust the monitor brightness level, use the LED Brightness Adjust button located at the top left of the device. Short presses will cycle through the available brightness levels.

Zoom Function
The BR90 allows zooming of the camera image. Press the Zoom button located at the bottom right of the device once to zoom 1.5x, press again to zoom 2x, and press once more to return to the normal view.

Video Output
To view the video on an external monitor, use the video output port (NTSC) on the device. You will need an RCA male to 3.5 mm mono male cable (not supplied) for this purpose.

INTRODUCTION

Thank you for selecting the Extech BR90 Compact Borescope. This device provides real-time video monitoring and is ideal for inspect-ing the interior of pipelines, conduits, and other narrow spaces. The BR90 is useful in the installation of appliances, electronic equip-ment, fixtures, and is handy for vehicle troubleshooting and maintenance.
We ship this device fully tested and calibrated and, with proper use, it will provide years of reliable service. Please visit our website
(https://www.extech.com) for additional information including the latest version of this User Manual and Customer Support.

Features

Waterproof (IP67) 0.3 in. (8 mm) diameter camera with 2.5 ft. (77 cm) flexible goose–neck cable
640 x 480 pixel resolution camera with four bright LED lamps and dimmer function
Glare-free close-up field of view
Large 4.3 in. (109 mm) color TFT monitor
180° image rotation and mirror (flip) features
Adjustable display brightness and 2x digital Zoom
Video output port for viewing images on an external monitor
Low battery status indicator

PRODUCT DESCRIPTION

Video monitor
180° rotation and image mirror (flip) button
Monitor brightness adjust button
Camera
Power ON/OFF indicator
Power ON/OFF button
Camera LED brightness adjust button
Zoom button
Video output port

Note: Accessories, battery compartment, and camera cable stor-age are not pictured. These items are pictured in later sections.

PACKING LIST
The BR90 package contains the following equipment

BR90 Borescope
User Manual
4 x AA batteries
Soft carry-case
Magnet accessory
Single hook accessory
Mirror accessory
Attachment fixture

OPERATION

Battery Installation
The BR90 is powered by four 1.5V AA batteries. To install the bat-teries, open the rear battery compartment using the latches as shown. Observe correct polarity when installing batteries. Ensure that the battery compartment is completely closed before use. The battery status indicator appears on the upper left corner of the video monitor for convenience.

Opening tabs for battery compartment

and cable storage
Never dispose of used batteries or rechargeable batteries in household waste. As consumers, users are legally required to take used batteries to appropriate collection sites, the retail store where the batteries were purchased, or wherever batteries are sold.

Powering the BR90
To switch the BR90 ON, long press the Power ON/OFF button (top, right) until the power indicator lamp lights. Long press again to switch OFF.

Accessing the Camera Cable
The camera cable is stored in the BR90 housing. To access the ca-ble, press the two compartment tabs, as shown above. Release a length of cable as required and snap the housing shut.

To store the cable after use : open the housing, coil the cable inside the housing, and snap the housing closed.

Accessory Installation
Place the single hook (B) or mirror (A) into the hole on the camera lens as indicated by the arrow in the diagram below, and then push the attachment fixture (C), as shown below, to secure it.

$Extech-BR90 Compact Borescope $7$$

Accessory Installation
Insert the magnet (E) into the attachment fixture (D), with the pointed end placed in the hole on the lens as indicated by the arrow in the diagram below, and then tighten the attachment fixture, as shown, to secure it.

$Extech-BR90 Compact Borescope $8$$

Accessory Installation continued

Camera LED Brightness Adjust
When lighting in the area under inspection is inadequate, use the LED Brightness Adjust button (middle, right) to adjust the level. Short presses will step through the available brightness levels.

Monitor Brightness Adjust
Use the LED Brightness Adjust button (top, left) to adjust the level. Short presses will step through the available brightness levels.

Zoom Function
To zoom the camera image, use the Zoom button (bottom, right). Press once to zoom 1.5x, press again to zoom 2x, and press again to return to normal view.

180° Image Rotation and Mirror Image Adjust
Press the Image Rotation/Mirror button (bottom, left) to rotate the image 180°. Press again to flip the image (mirror mode). Press again to return to normal view mode.

Video Output
You can view video on an external monitor using the video output port (NTSC). An ‘RCA’ male to 3.5 mm mono male cable (not sup-plied) is required.

SAFETY CONSIDERATIONS

Do not forcibly bend the camera cable, the minimum bend radius is 1 in. (25 mm); damage to the instrument can result.
The camera cable is waterproof (IP67) but the main instrument is not. Please protect the main instrument from liquid and moisture.
Remove the batteries when the BR90 is to be stored for ex-tended periods.
Disposal : Do not dispose of this instrument in household waste. The user is obligated to take end-of-life devices to a designated collection point for the disposal of electrical and electronic equipment.

FCC COMPLIANCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

SPECIFICATIONS

Camera diameter	0.3 in. (8 mm)
Image sensor	1/9”, CMOS
Effective pixels	640 x 480 resolution
Focus distance	1.2 ~ 3.1 in. (3 ~ 8 cm) approximately
Horizontal viewing angle	50°
Cable length	2.5 ft. (77 cm)
Cable dimensions	0.2 in. (4.4 mm) diameter; 2.5 ft. (77 cm) length
Cable bend radius	1 in. (25 mm) minimum
IP rating	IP67 waterproof (cable only and ex- cluding the cable connection to

the main instrument)
Power supply| 4 x 1.5V AA batteries
Display type and dimensions| 4.3 in. (109 mm) Color TFT display
Image Zoom ratio| 1.5x and 2x
---|---
Video format| NTSC
LED brightness| 200 lux (3.1 in. [8 cm] from camera head to object) and 1300 lux (2.1 in. [3 cm] from camera head to object)
Power consumption| 1.5 Watts, max.
Monitor dimensions| 7.1 x 3.5 x 1.4 in. (180 x 36 x 89 mm)
Operating temperature| 14 ~ 122℉ (-10 ~ 50℃)
Storage temperature| –4 ~ 140℉ (-20 ~ 60℃)
Operating humidity| 15% ~ 85% RH
Product weight| 11.5 oz. (325 g)

TWO-YEAR WARRANTY
FLIR Systems, Inc. warrants this Extech brand instrument to be free of defects in parts and workmanship for two years from date of shipment (a six-month limited warranty applies to sensors and cables). To view the full warranty

text please visi t: https://www.extech.com/warranty.

Customer Support

Customer Support Telephone List :| https://support.flir.com/contact
---|---
Repair, Calibration, and Technical Support| https://support.flir.com

USER MANUAL

Website
http://www.flir.com

Customer support
http://support.flir.com

Copyright
© 2021, FLIR Systems, Inc. All rights reserved worldwide.

Disclaimer
Specifications subject to change without further notice. Models and accessories subject to regional market considerations. License procedures may apply. Products described herein may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions.