ExBrite 20BM2424BLVC1V1 LED Lighted Mirror User Manual

: June 13, 2024
: ExBrite

Table of Contents

WARNING AND SAFETY INSTRUCTION
INSTALLATION SAFETY
CJECK PRODUCT LIST AFTER OPENING THE PACKAGE
TOOLS YOU MAY NEED
INSTALLATION MANUAL
OPERATION INSTRUCTION
THANK YOU FOR YOUR SUPPORT
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ExBrite 20BM2424BLVC1V1 LED Lighted Mirror

ExBrite 20BM2424BLVC1V1 LED Lighted Mirror

WARNING AND SAFETY INSTRUCTION

Before assembling your LED Lighted Mirror fixture, please make sure that you carefully read through this instruction sheet, refer back to them during installation to ensure your product is fitted safely and correctly. Keep these instructions for future use.

WARNING Risk of Fire and Electric Shock

All fittings must be installed in accordance with current IEE wiring regulations. lf in doubt, consult a qualified electrician.
Switch off the electrical supply at the main circuit board before installation and maintenance.
Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
Regularly check the cord, the transformer and all other parts for damage. If any part is damaged the product should not be used.

INSTALLATION SAFETY

Inspect the product immediately upon receipt for the transit damage or missing parts. Handle the product with care and protect against knocks to all side and edge of the glass.
Ensure there are no hidden pipes or cables in the wall before drilling.
Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case the drill slips.

CAUTION

The light source of this product is non-changeable light diodes(LED)Do not disassemble the product, as the light diodes can cause damage to the eyes.
NOTE: The important safeguards and instructions that appear in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and care, are factors that can’t be built into any product. These factors must be supplied by the person(s) caring for and operating the fixture. Do not install this fixture in hazardous locations.

CJECK PRODUCT LIST AFTER OPENING THE PACKAGE

LED Lighted Mirror 1 pcs
Screws for wall 3pcs
Type A Plastic Anchor 3 pcs
Installation Manual 1 pcs

TOOLS YOU MAY NEED

INSTALLATION MANUAL

Level and mark the location.
Place the mounting bar against the wall and make some marks on the wall.
Drill the holes and place the suitable plastic anchors.
Screw the mounting bar onto the wall with the screws.
Connect the mirror with the main supply.
ATTENTION :
PLEASE CUT OFF THE MAIN POWER SUPPLY BEFORE WIRING!
Hang the mirror on the bar.

OPERATION INSTRUCTION

Button turns blue when connected to main supply.
Short-touch the button to turn on/ off the mirror.
Long touching the button to adjust the brightness (Dimming)
When the light is on, the anti-fog function is activated Automatically.

AFTERCARE INSTRUCTIONS
Clean using a soft dry cloth only when turned off Never use cleaning agents or abrasive materials. Do not allow moisture to come into contact with lamp.

THANK YOU FOR YOUR SUPPORT

We wish you have wonderful experience in our product. If you have any other needs or queries, please feel free to contact us by email info@exbriteusa.com, and get replies within 48 business hours.