GIGACLOUD WF304470 Loft Bed with Table Instruction Manual

GIGACLOUD WF304470 Loft Bed with Table

Product Information

Product Usage Instructions

Assembly Instructions

Part List:

Hardware List (WF304471):

Assembly Steps:

1. Step 1: Assemble parts according to the provided part list.
2. Step 2: Ensure that Part 11 is facing up with the “x” mark on it before tightening.
3. Step 3: Follow the sequence of Parts 22 and 21 for assembly.
4. Step 4: Use Part 18 as indicated in the instructions.
5. Step 5: Assemble Parts 4, 7, and 11 as instructed.
6. Step 6: Follow the arrangement of Parts 8 for assembly.
7. Step 7: Proceed with assembly as per the instructions for Parts 5 and 11.
8. Step 8: Complete assembly using Parts 1 and 6.
9. Step 9: Assemble Parts 1, 3, and 11 according to the instructions.
10. Step 10: Use Parts 1, 3, and the provided quantity of hardware.
11. Step 11: Assemble Parts 11, 3, and 1 following the given instructions.
12. Step 12: Complete assembly using Parts 1, 3, and the specified quantity of hardware.

SAFETY WARNINGS AND GENERAL NOTES

• Follow the information on the warnings on the loft bed end structure and on the carton. Do not remove the warning label from the bed. Always use the recommended size mattress on mattress support, or both, to help prevent the likelihood of entrapment or falls.
• The top surface of the mattress must be at least 5*inch (127mm) below the upper edge of the guardrail.
• Do not allow children under 6 years of age to use the upper bunk.
• Periodically check and ensure the guardrail, ladder and other components are in their proper position, free from damage, and all connectors are tight.
• Do not allow horseplay on or under beds.
• Always prohibit jumping on the bed.
• Prohibit more than one person on upper bunk.
• Always use the ladder for entering and leaving the upper bunk.
• Do not use substitute parts.Contact the manufacturer or dealer for replacement parts.
• Use of a night-light may provide added safely precaution for a child using the upper bunk.
• Always use guardrails on both long sides of the upper bunk.
• If the loft bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.
• The use of water or sleep flotation mattresses is prohibited.
• STRANGULATION HAZARD -Never attach or hang items to any part of the loft bed that are not designed for use with the bed.
• Keep these instructions for future reference.
• We recommend assembling your loft bed on the shipping carton to protect your floor or carpet.
• Be certain all staples are out of the box before beginning assembly on the shipping carton.
• USE ONLY MATTRESSES WHICH ARE 74″-75″ LONG AND 54″ WIDE ON UPPER BUNKS. ENSURE THICKNESS OF MATTRESS DOES NOT EXCEED 6″.
• SURFACE OF MATTRESS MUST BE AT LEAST 5″ (127MM) BELOW THE UPPER EDGE OF GUARDRAILS.
• Replacement Parts:
  • Replacement Parts, including additional guardrails, may be obtained from any of our (GIGACLOUD TECHNOLOGY (USA) INC. 18961 ARENTH AVENUE, CITY OF INDUSTRY , CA, 91748.) dealers

Detail View

Part List

WF304470 Part List
Hardware List WF304471

Part List: WF304472

Hardware List WF304471

ASSEMBLY TOOLS REQUIRED ( NOT INCLUDED )
PLEASE BE CAREFUL DO NOT DAMAGE THE HOLE POSITION WHEN YOU USE POWER TOOLS!

Assembly Instructions

Note: Part 11 will face up with the “x” mark on it, otherwise it cannot be tightened

Note: Part 11 will face up with the “x” mark on it, otherwise it cannot be tightened

Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you need to leave a certain space at the edges, otherwise it will cause the board to break. Do not lock the bed slats on the edge of the wood, please hold firmly before screwing , hold it in place with one hand, then lock the screw.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>